Panasonic KX-T7020 User manual

Panasonic
Proprietary Telephone for
Electronic Modular Switching System
MODEL NO.
KX-T7020
With Speaker Phone
Illustrated Model: White
KX-T7020 is compatible with all of the Panasonic Electronic Modular
Switching Systems and can perform most functions with most Panasonic
KX-T systems.
Please read before use.

Important Safety Instructions
When using your telephone
equipment, basic safety
precautions should always be
followed to reduce the risk of fire,
electric shock and injury to
persons, including the following:
1. Read and understand all
instructions.
2. Follow all warnings and
instructions marked on the
product.
3. Unplug this product from the
wall outlet before cleaning.
Do not use liquid cleaners or
aerosol cleaners. Use a damp
cloth for cleaning.
4. Do not use this product near
water, for example, near a
bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet
basement, or near a
swimming pool.
5. Do not place this product on
an unstable cart, stand, or
table. The product may fall,
causing serious damage to
the product.
6. Slots and openings in the
cabinet and the back or
bottom are provided for
ventilation, to protect it from
overheating, these openings
must not be blocked or
covered. The openings
should never be blocked by
placing the product on the
bed,, sofa, rug, or other similar
-1
surface. This product should
never be placed near or over
a radiator or heat register.
This product should not be
placed in a built-in installation
unless proper ventilation is
provided.
7. Do not allow anything to rest
on the telephone cord. Do not
locate this product where the
cord will be abused by
persons walking on it.
8. Do not overload wall outlets
and extension cords as this
can result in the risk of fire or
electric shock.
9. Never push objects of any
kind into this product through
cabinet slots as they may
touch dangerous voltage
points or short out parts that
could result in a risk of fire or
electric shock. Never spill
liquid of any kind on the
product.
10. To reduce the risk of electric
shock, do not disassemble
this product, but take it to a
qualified serviceman when
some service or repair work is
required. Opening or
removing covers may expose
you to dangerous voltages or
other risks. Incorrect
reassembly can cause
electric shock when the
appliance is subsequently
used.

11. Unplug this product from the
wall outlet and refer servicing
to qualified service personnel
under the following conditions:
A. When the power supply
cord or plug is damaged or
frayed.
B. If liquid has been spilled
into the product.
C. If the product has been
exposed to rain or water.
D. If the product does not
operate normally by
following the operating
instructions. Adjust only
those controls, that are
covered by the operating
instructions because
improper adjustment of
other controls may result in
damage and will often
require extensive work by
a qualified technician to
12.
13.
restore the product to
normal operation.
E. If the product has been
dropped or the cabinet has
been damaged.
F. If the product exhibits a
distinct change in
performance.
Avoid using a telephone
(other than a cordless type)
during an electrical storm.
There may be a remote risk of
electric shock from lightning.
Do not use the telephone to
report a gas leak in the
vicinity of the leak.
SAVE THESE
INSTRUCTIONS
-2-

Thank you for purchasing the Panasonic Telephone.
Table of Contents
important safety instructions
.................. 1
Connection ............................
Location of controls ........................ .5
initial setting ............................. .7
Installing the card holder .................... .8
Wall mounting ............................ .9
Important information ....................... IO
Accessory order information .......... Back cover
-3-

Connection
Connect as shown.
To the EMSS control
unit
Included accessories
1
Handset . . . . . . one Card holder with memory
station card . . . . . . . . . . . one
Telephone line cord . . . . one Handset cord . . . . . . one
-4-

Location of controls
-0
--a
----a
-63
-@
----a
----a
-@
KX-T7020 is compatible with the Panasonic Electronic Modular
Switching Systems and can perform most functions with most
Panasonic KX-T systems.
-5-

Panasonic
MODEL NO. KX-T7020
Operating Instructions
Press the ‘P-PHONEbutton or lift the handset first.
(LL-II
Feature Description
Intercom Dials from station to
Calling station within the system.
Individual Selects any CO line
Line Access directly.
Automatic Selects an unoccupied
Line Access CO line automatically.
System Dials the stored phone
Speed number by following
Dialing simple operation.
One-Touch Dials the stored number
Dialing by pressing only one
button.
Automatic
Call Back
Busy
(Camp-on)
Receives a notice that the
busy line becomes free.
Redial Redials the last number
dialed.
Automatic redial can work
in upgraded systems.
Operation Procedures
c
/
*g -[access]
Dialing: ]x
llJl
Programming:
1. Set the memory switch to “PROGRAM”.
2. p~-[fgq-$g-pJ
3. The memory switch must be adjusted so
that it is in the “SET” position.
Outside Calls:
Intercom Calls:

Feature Description
Mswer Answers an incoming
call.
Automatic
Answer-
Intercom
Answers an intercom call
in the automatic hands-
free mode.
Dial Call
Pickup Answers any ringing
extension within the same
extension group.
Hold-
CO Line Puts an outside call on
hold.
Holcl-
Intercom Puts an intercom call on hold.
Call Transfer Transfers a call to any
to Extension extension.
Canceling: The indicator goes out.
m The pickup code depends
on the EMSS Control
“nit
The CO line indicator flashes in green
Other extensions flash in red.
The indicator lights in
Retrieving co
q
The indicator lights in
from another (I green.
extension:
The intercom indicator flashes in
~~ftTi!%Jm~
Transferring without speaking to the
For further details, please refer to the Electronic Modular Switching System (EMSS) Control
Unit Manual.

Checklist
For your
convenience,
please
fill inthe blankwith Operationson the EMSSControl Unit
Aanual.
System Features Operation Procedures
Outward Dialing
Individual Trunk Group
Calling Doorphone
Conference
Paging All Extensions
Paging-Extension
Group
Paging-External
Paging And Transfer
Paging-Answer
Paging from Built-in
Speaker
----------
Paging from
External Equipment
--------------------
Flexible Line Button
Changing to a CO Line
Button
---------
Changing to a DSS
Button
---------
Changing to a One
Touch Dialing Button
---------e-------v-
-------------------
Call Forwarding
Do Not Disturb

System Features Operation Procedures
Please use this Operating Instructions Manual for basic operations. Refer to the
Electronic Modular Switching System (EMSS) Control Unit Manual for
additional features.
Notice
A series of the beep tone may sound periodically when the MEMORY switch is set to
the “PROGRAM”. This is a normal condition.
Panasonic Company
Division of Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Company (West) of America
Division of Matsushita Electric Corporation of America
6550 Katella Avenue, Cypress, California 90630
Panasonic Sales Company (“PSC”)
Division of Matsushita Electric of Puerto Rico, Inc.
San Gabriel lndustnal Park, 65th Infantry Avenue, KM 9.5, Carolina, P R 00630
Printed in Unlted Kingdom PQQX6464ZA F0391 R1071 R