Panasonic KX-HGT100 Quick start guide

Upgrade Manual for KX-HGT100 from Ver1.XX to Ver2.04
The necessary one
1. HGT100 that does upgrade
2. PC
3. firmware(IPPAPL_02_04_20090515.img)
Connection
1. LAN port of HGT100 and PC is connected with the same hub.
HGT100 and PC's connected charts
Setting
1. IPaddress of PC is set to 192.168.0.100.
2. HGT100 turns on the power supply while pushing MUTE and OK at the same time.
figure of HGT100
HUB
HGT100
PC
LAN port
OK button
MUTE button

Procedure
1. The setting of the network of HGT100 is confirmed.
The Network setting (STATIC/DHCP) is confirmed pushing [INFO], [ ], [ ].
IP address is confirmed continuously pushing [ ].
When the Network setting is STATIC, Subnet mask and Default gateway is confirmed
pushing [ ] in addition.
2. Connection PC and HGT100
Internet Explorer is started up with PC, and IPaddress of HGT100 is input to the
address.
If the screen of Authorization is displayed, the following values are input.
User name:KX-HGT100
Password:kx-hgt100
login display of HGT100
KX-HGT100
kx-hgt100

3. Saving of configuration
"Configuration File" is selected from a left menu.
And, "Save Configuration File" is clicked.
Cfg.txt is saved to an arbitrary directory.
Configuration File display of HGT100
1. click 2. click

4. Firmware upgrade
"Upgrade Firmware" is selected from a left menu.
File (IPPAPL_02_04_20090515.img) for the update is selected clicking "Browse...".
"Upgrade Firmware" is clicked.
If "Successfully completed" is displayed, the power supply of HGT100 is turned off.
Upgrade Firmware display of HGT100
1. click
3. click
2. select firmware file

5. HGT100 is made a factory default setting.
The power supply is turned on while pushing [PROGRAM], [OK], and [MUTE] at the
same time.
It is confirmed to become "Not configured Web setting" screen.
figure of HGT100
OK button
MUTE button
PROGRAM button