Panasonic 600 BASE UNIT User manual

For more information, visit epb.com/customer-support/business-support
or call 423-648-1500, option 2
1
The following gure displays the hardware features on the Panasonic 600 Base Unit cordless phone.
The table lists each numbered feature shown in this gure.
PANASONIC 600 HARDWARE FEATURES
PANASONIC®600 BASE UNIT
Quick Function Guide

2
For more information, visit epb.com/customer-support/business-support
or call 423-648-1500, option 2
2
Voicemail
•To set up Voicemail Dial *98 on the phone and enter the pin (Call
EPB at [phone] if you need help).
• After the first time Dialed, the system will make you change the pin
• Then listen to the prompts to set the remainder of the Voicemail up
• Message light will flash on the phone if you have a Voicemail
•To check Voicemail, Dial *98
CALL FORWARDING:
• Dial *72 plus the 10-digit forwarding number and listen for beeps
• Remove forwarding Dial *73 and listen for beeps
CALL TRANSFER – BLIND TRANSFER:
• Press BLIND button far right button under display
• Dial EXT number or phone number
• Press CALL button on middle button under display
CALL TRANSFER – SCREENED TRANSFER:
• Press XFER/CLR key
• Dial the EXT number to send transfer
• Press CALL button on middle button under display
• When EXT answers, inform of incoming transfer
• Complete transfer by pressing XFER/CLR key again
• If person cannot accept transfer, press CANCEL button two times (far right button under
display) and original EXT will be reconnected with caller
• Person declining transfer will hear what sounds like a busy signal to conrm transfer
was cancelled
CALL HOLDS:
• Press HOLD/MSG key to place caller on hold
• You cannot pick up call holds from other EXTS - must do a transfer
CALL MUTES:
• Press MUTE key - far left button under display
• MUTE key will ash while mute is on
• Toggle MUTE key to resume conversation
CHECK CALL HISTORY:
• Press far right button under display.