Panasonic KX-TD1232AL Installation and operating instructions

Digital Super Hybrid System
KX-TD1232AL
User Manual Addendum
In this manual, the last letter “AL” of each model number is omitted.

Simple Guide on How to Use this Manual
Example 1 (Refer to both U/M and U/M Addendum)
CCO Incoming Call Information Log......................................................................3-49 A150
Example 2 (Refer to only the U/M Addendum)
DDoorphone Call .....................................................................................................3-63 A54
Section 1 DPT Overview...................................................1-1
1.1 Configuration............................................................................1-2
Location of Controls................................................................................................1-3
Feature Buttons........................................................................................................1-9
Fixed Buttons .....................................................................................................1-9
Flexible Buttons ...............................................................................................1-12 A11
Line Access Buttons.........................................................................................1-13
Initial Setting.........................................................................................................1-15
Display Contrast Adjustment ...........................................................................1-15 A149
When using the headset....................................................................................1-15
When changing the ringing tone of a CO button.............................................1-15
Volume Control — Handset Receiver/Headset/Ringer/Speaker......................1-16 A149
LED Indication......................................................................................................1-18
Section 2 Station Programming.......................................2-1
2.1 Programming Instructions.......................................................2-2 A149
2.2 Station Programming...............................................................2-6
Call Waiting Tone Type Assignment.......................................................................2-6
Charge Fee Reference..............................................................................................2-7 A14
Extension Charge Fee Reference.......................................................................2-8
CO Line Charge Fee Reference.........................................................................2-9
Total Extension Charge Fee Reference............................................................2-10
Account Code Charge Fee Reference ..............................................................2-11
New Rate Set....................................................................................................2-12 A149
All Clear...........................................................................................................2-13
Print the Charge Fee.........................................................................................2-15
Account Code Set.............................................................................................2-16
2
User Manual Contents
User
Manual U/M
Addendum
User
Manual U/M
Addendum
See User Manual Page 3-49.
See User Manual Addendum Page150.
User Manual Page 3-63 is now obsolete.
See User Manual Addendum Page 54.

3
User Manual Contents
Flexible Button Assignment..................................................................................2-17
Account Button.................................................................................................2-17
Alert Button............................................................................................................. A15
Conference (CONF) Button.............................................................................2-17
Direct Station Selection (DSS) Button.............................................................2-18
FWD/DND Button ...........................................................................................2-19
Group-CO (G-CO) Button ...............................................................................2-19
Hurry-Up Button...................................................................................................... A15
Live Call Screening (LCS) Button.......................................................................... A16
Live Call Screening (LCS) Cancel Button.............................................................. A16
Log-In / Log-Out Button......................................................................................... A17
Loop-CO (L-CO) Button..................................................................................2-20
Message Waiting (MESSAGE) Button............................................................2-20
Night Button ............................................................................................................ A17
One-Touch Dialing Button...............................................................................2-21
One-Touch Dialing with Auto Hold Button............................................................ A18
Phantom Button....................................................................................................... A18
SAVE Button....................................................................................................2-22
Single-CO (S-CO) Button................................................................................2-22
Terminate Button ..................................................................................................... A19
Two-Way Record Button......................................................................................... A20
Two-Way Transfer Button ....................................................................................... A21
Voice Mail (VM) Transfer Button....................................................................2-23
Full One-Touch Dialing Assignment.....................................................................2-24
Handset / Headset Selection..................................................................................2-24
Intercom Alerting Assignment...............................................................................2-25
Live Call Screening Mode Setting ............................................................................... A22
Phantom Extension Bell On/Off Setting ...................................................................... A23
Preferred Line Assignment — Incoming ..............................................................2-26
No Line Preference — Incoming.....................................................................2-26
Ringing Line Preference — Incoming.............................................................2-26
Prime Line (CO Line) Preference — Incoming...............................................2-27
Preferred Line Assignment — Outgoing...............................................................2-28
No Line Preference — Outgoing.....................................................................2-28
Idle Line Preference — Outgoing....................................................................2-28
Prime Line (CO Line) Preference — Outgoing...............................................2-29
Prime Line (INTERCOM) Preference — Outgoing........................................2-29
Ringing Tone Selection for CO Buttons ...............................................................2-30
Ringing Tone Selection for the Intercom Button ......................................................... A24
Self-Extension Number Confirmation...................................................................2-31
Station Programming Data Default Set.................................................................2-31
Station Speed Dialing Number/Name Assignment (KX-T7235 only)..................2-32 A149
Section 3 User Programming (Manager Programming)..... A25
3.1 Programming Instructions............................................................ A26
General Programming Instructions............................................................................... A26
Programming Ways....................................................................................................... A29
User
Manual U/M
Addendum

4
User Manual Contents
3.2 User Programming (Manager Programming) ............................ A31
[000] Data and Time Set............................................................................................... A31
[001] System Speed Dialing Number Set..................................................................... A33
[002] System Speed Dialing Name Set........................................................................ A35
[003] Extension Number Set ........................................................................................ A36
[004] Extension Name Set............................................................................................ A38
Section 4 DPT Features.....................................................3-1
4.1 Basic Operation.........................................................................3-2
Making Calls ...........................................................................................................3-2
Receiving Calls........................................................................................................3-3
4.2 DPT Features ............................................................................3-4
A
Absent Message Capability.....................................................................................3-4
Account Code Entry................................................................................................3-8 A150
Alternate Calling — Ring / Voice.........................................................................3-12
Answering, Direct CO Line ..................................................................................3-13
Automatic Callback Busy (Camp-On)..................................................................3-14 A40
A150
B
Background Music (BGM)....................................................................................3-16 A41
Busy Station Signalling (BSS)..............................................................................3-17
C
Call Forwarding — SUMMARY..........................................................................3-18
Call Forwarding — All Calls...........................................................................3-19
Call Forwarding — Busy.................................................................................3-21
Call Forwarding — No Answer.......................................................................3-22
Call Forwarding — Busy / No Answer............................................................3-23
Call Forwarding — to CO Line.......................................................................3-25
Call Forwarding — Follow Me........................................................................3-27
Call Forwarding — CANCEL...............................................................................3-29
Call Hold ...............................................................................................................3-31
Call Hold, Exclusive..............................................................................................3-32
Call Hold Retrieve.................................................................................................3-33
Calling/Connected Line Identification Presentation (CLIP/COLP)............................. A42
Calling Line Identification Restriction (CLIR)............................................................ A43
Call Park................................................................................................................3-35
Call Pickup, CO Line ............................................................................................3-36
Call Pickup, Directed ............................................................................................3-37
Call Pickup, Group................................................................................................3-38
Call Pickup Deny...................................................................................................3-39
Call Splitting..........................................................................................................3-40
Call Transfer — to CO Line..................................................................................3-41
User
Manual U/M
Addendum

5
User Manual Contents
Call Transfer — to Extension................................................................................3-42
Call Waiting...........................................................................................................3-45 A150
CO Incoming Call Information Display................................................................3-47 A45
CO Incoming Call Information Log......................................................................3-49 A150
CO Incoming Call Information Log Lock ............................................................3-51
CO Incoming Call Information Log Mode ...........................................................3-53
Conference.............................................................................................................3-54
Conference, Unattended........................................................................................3-56
Connected Line Identification Restriction (COLR) ..................................................... A48
D
Data Line Security.................................................................................................3-57 A151
Display Call Information.......................................................................................3-58
Do Not Disturb (DND)..........................................................................................3-59 A49
Do Not Disturb for Direct Dialing In Calls.................................................................. A52
Do Not Disturb (DND) Override ..........................................................................3-62
Doorphone Call .....................................................................................................3-63 A54
E
Electronic Station Lockout....................................................................................3-65
Emergency Call............................................................................................................. A56
External Feature Access ........................................................................................3-67
F
Full One-Touch Dialing.........................................................................................3-68
H
Handsfree Answerback..........................................................................................3-69 A151
Handsfree Operation..............................................................................................3-70
Hotel Application.......................................................................................................... A57
I
Intercom Calling....................................................................................................3-71 A151
L
Live Call Screening (LCS) ........................................................................................... A59
Lockout..................................................................................................................3-72
Log-In / Log-Out .......................................................................................................... A66
M
Message Waiting....................................................................................................3-73 A151
Microphone Mute..................................................................................................3-75
N
Night Service.........................................................................................................3-76 A68
Notebook Function ....................................................................................................... A70
O
Off-Hook Call Announcement (OHCA) ...............................................................3-77 A151
One-Touch Dialing................................................................................................3-78
Operator Call.........................................................................................................3-79 A71
User
Manual U/M
Addendum

6
User Manual Contents
Outward Dialing, Line Access — SUMMARY....................................................3-80
Line Access, Automatic....................................................................................3-81
Line Access, CO Line Group...........................................................................3-82
Line Access, Individual....................................................................................3-83
P
Paging — SUMMARY .........................................................................................3-84 A151
Paging — All....................................................................................................3-85
Paging — External...........................................................................................3-86
Paging — Group...............................................................................................3-87
Paging — ANSWER .............................................................................................3-88
Paging — DENY.......................................................................................................... A72
Paging and Transfer...............................................................................................3-89
Paralleled Telephone Connection..........................................................................3-92
Phantom Extension....................................................................................................... A73
Pickup Dialing (Hot Line).....................................................................................3-94
Predial Preparation........................................................................................................ A74
Pulse to Tone Conversion......................................................................................3-96
Q
Quick Dialing................................................................................................................ A75
R
Recall.....................................................................................................................3-97
Redial, Automatic..................................................................................................3-98 A151
Redial, Last Number..............................................................................................3-99
Redial, Saved Number.........................................................................................3-100
S
Secret Dialing......................................................................................................3-101 A152
Station Feature Clear...........................................................................................3-102 A76
Station Speed Dialing..........................................................................................3-103
System Speed Dialing .........................................................................................3-105 A152
System Working Report................................................................................................ A77
T
Terminate ...................................................................................................................... A78
Timed Reminder..................................................................................................3-106 A152
Toll Restriction Override.....................................................................................3-108
Toll Restriction Override by Account Code Entry.........................................3-108 A152
Toll Restriction Override for System Speed Dialing.....................................3-109 A79
Trunk (CO Line) Answer From Any Station (TAFAS).......................................3-110 A152
Two-Way Recording into Voice Mail........................................................................... A80
U
Uniform Call Distribution (UCD) ................................................................................ A81
V
Voice Mail Integration.........................................................................................3-111
Voice Mail Transfer.............................................................................................3-113
User
Manual U/M
Addendum

7
User Manual Contents
4.3 Operator Service Features...................................................3-114 A82
Alert Indication............................................................................................................. A82
Automatic Overflow and Hurry-Up Transfer............................................................... A83
Background Music (BGM) — External..............................................................3-114
Class of Service (COS) Switch..................................................................................... A84
CO Incoming Call Information Log Lock Clear.................................................3-116 A87
Night Service On/Off...........................................................................................3-117
Remote Station Lock Control..............................................................................3-120 A88
Hotel Application.................................................................................................3-121 A89
Check-In / Check-Out ....................................................................................3-121
Timed Reminder, Notification for Unscreened Extension...................................... A91
Timed Reminder, Remote (Wake-Up Call)....................................................3-123 A92
Live Call Screening Password Control......................................................................... A96
4.4 Special Display Features (— for KX-T7235).....................3-126 A97
CO Outgoing Call Log........................................................................................3-128
Extension Dialing................................................................................................3-128
Station Speed Dialing..........................................................................................3-129
System Speed Dialing .........................................................................................3-129
System Feature Access Menu..............................................................................3-130
Absent Message Capability............................................................................3-130
Answering, Paging — External......................................................................3-131
Answering, Paging — Group.........................................................................3-131
Call Park (Operator only)...............................................................................3-132 A152
Call Pickup, Group.........................................................................................3-132
Message Waiting ............................................................................................3-133
Night Service (Operator only)................................................................................. A99
Paging — External.........................................................................................3-133
Paging — Group.............................................................................................3-134
Paralleled Telephone Connection...................................................................3-134
Section 5 DSS Console Features ......................................4-1
5.1 Configuration............................................................................4-2
Location of Controls................................................................................................4-3
5.2 DSS Console Features ..............................................................4-4
Station Programming...............................................................................................4-4
Extension Number Assignment..........................................................................4-4
One-Touch Dialing Assignment.........................................................................4-4
One-Touch Access Assignment for System Features.........................................4-5 A100
Direct Station Dialing..............................................................................................4-7
One-Touch Dialing..................................................................................................4-7
One-Touch Access for System Features..................................................................4-8
Call Transfer............................................................................................................4-8
User
Manual U/M
Addendum

8
User Manual Contents
Section 6 SLT and ISDN Telephone Features.................5-1 A103
6.1 Basic Operation.........................................................................5-2
Making Calls ...........................................................................................................5-2
Receiving Calls........................................................................................................5-3
6.2 SLT and ISDN Telephone Features.........................................5-4
A
Absent Message Capability.....................................................................................5-4
Account Code Entry................................................................................................5-8 A104
Alternate Calling — Ring / Voice.........................................................................5-10
Automatic Callback Busy (Camp-On) ..................................................................5-11 A106
B
Busy Station Signalling (BSS)..............................................................................5-12
C
Call Forwarding — SUMMARY..........................................................................5-13
Call Forwarding — All Calls...........................................................................5-14
Call Forwarding — Busy.................................................................................5-15
Call Forwarding — No Answer.......................................................................5-15
Call Forwarding — Busy / No Answer............................................................5-16
Call Forwarding — to CO Line.......................................................................5-17
Call Forwarding — Follow Me........................................................................5-18
Call Forwarding — CANCEL...............................................................................5-19
Call Hold ...............................................................................................................5-20
Call Hold Retrieve.................................................................................................5-21
Calling Line Identification Restriction (CLIR)............................................................ A108
Call Park................................................................................................................5-22
Call Pickup, CO Line ............................................................................................5-23
Call Pickup, Directed ............................................................................................5-24
Call Pickup, Group................................................................................................5-25
Call Pickup Deny...................................................................................................5-26
Call Splitting..........................................................................................................5-27
Call Transfer — to CO Line......................................................................................... A110
Call Transfer — to Extension................................................................................5-28
Call Waiting...........................................................................................................5-30 A153
Conference.............................................................................................................5-32
Connected Line Identification Restriction (COLR) ..................................................... A111
D
Data Line Security.................................................................................................5-34 A151
Do Not Disturb (DND)..........................................................................................5-35 A112
Do Not Disturb for Direct Dialing In Call ................................................................... A114
Do Not Disturb (DND) Override ..........................................................................5-36
Doorphone Call .....................................................................................................5-37 A116
User
Manual U/M
Addendum

9
User Manual Contents
E
Electronic Station Lockout....................................................................................5-39
Emergency Call............................................................................................................. A118
External Feature Access ........................................................................................5-41
H
Hotel Application.......................................................................................................... A119
I
Intercom Calling....................................................................................................5-42 A153
L
Lockout..................................................................................................................5-42
Log-In / Log-Out .......................................................................................................... A121
M
Message Waiting....................................................................................................5-43 A122
N
Night Service.........................................................................................................5-45 A125
O
Off-Hook Call Announcement (OHCA) ...............................................................5-45 A153
Operator Call.........................................................................................................5-46 A127
Outward Dialing, Line Access — SUMMARY....................................................5-47
Line Access, Automatic....................................................................................5-48
Line Access, CO Line Group...........................................................................5-48
P
Paging — SUMMARY .........................................................................................5-50
Paging — All....................................................................................................5-51
Paging — External...........................................................................................5-51
Paging — Group...............................................................................................5-53
Paging — ANSWER .............................................................................................5-55
Paging and Transfer...............................................................................................5-56
Paralleled Telephone Connection..........................................................................5-59
Pickup Dialing (Hot Line).....................................................................................5-60
Pulse to Tone Conversion......................................................................................5-62
Q
Quick Dialing................................................................................................................ A128
R
Redial, Last Number..............................................................................................5-62
S
Station Feature Clear.............................................................................................5-63 A129
Station Speed Dialing............................................................................................5-64
System Speed Dialing ...........................................................................................5-65 A153
User
Manual U/M
Addendum

10
User Manual Contents
T
Timed Reminder....................................................................................................5-66 A153
Toll Restriction Override.......................................................................................5-68
Toll Restriction Override by Account Code Entry...........................................5-68 A153
Toll Restriction Override for System Speed Dialing.......................................5-68 A130
Trunk (CO Line) Answer From Any Station (TAFAS).........................................5-70 A153
U
Uniform Call Distribution (UCD) ................................................................................ A131
V
Voice Mail Integration...........................................................................................5-71
6.3 ISDN Telephone Features.............................................................. A132
Section 7 Quick Reference................................................6-1
Basic Operation.......................................................................................................6-2 A154
Station Programming...............................................................................................6-2 A133
User Programming (Manager Programming)............................................................... A134
DPT Features...........................................................................................................6-6 A135
A154
Operator Service Features .....................................................................................6-17 A139
Special Display Features.......................................................................................6-19 A154
DSS Console Features...........................................................................................6-21
SLT and ISDN Telephone Features.......................................................................6-22 A141
Section 8 Appendix............................................................7-1
Display Examples....................................................................................................7-2 A143
A154
Feature Number List..............................................................................................7-12 A146
Tone List................................................................................................................7-15
Troubleshooting.....................................................................................................7-17
As section 3 User Programming (Manager Programming) has been added, the other sections have been shifted.
For example “Section 3 DPT Features” has become “Section 4 DPT Features”.
User
Manual U/M
Addendum

11
1.1 Configuration
Flexible Buttons
Flexible Buttons do not have specific features permanently assigned to them; features are
assigned to Flexible Buttons through System or Station Programming. “Flexible Button
Assignment” is addressed in Station Programming (Section 2). The three types of Flexible
Buttons are as follows:
• Flexible CO buttons (located on a DPT only)
• Flexible DSS buttons (located on a DSS Console only)
• Programmable Feature (PF) (located on a DSS Console only)
The following table outlines the features that can be assigned to Flexible Buttons:
In the list, “✔” indicates that the feature can be assigned to the button.
† : Available when the Digital Super Hybrid System is connected to a Proprietary
Telephone capable Panasonic Voice Processing System (one that supports proprietary
telephone integration; e.g. KX-TVP100).
Feature (Buttons)
Single-CO (S-CO)
Group-CO (G-CO)
Loop-CO (L-CO)
Alert
Hurry-Up
Live Call Screening (LCS)†
LCS Cancel†
Log-In / Log-Out
Direct Station Selection (DSS)
Message Waiting (MESSAGE)
Night
Phantom
Two-Way Record†
Two-Way Transfer†
Account
Conference (CONF)
FWD/DND
One-Touch Dialing
One-Touch Dialing with Auto Hold
SAVE
Terminate
Voice Mail (VM) Transfer
CO
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
DSS
—
—
—
—
—
—
—
—
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
PF
—
—
—
—
—
—
—
—
—
—
—
—
—
—
✔
✔
✔
✔
✔
✔
✔
✔

12
2.1 Programming Instructions
†: Available when the Digital Super Hybrid System is connected to a
Proprietary Telephone capable Panasonic Voice Processing System
(one that supports proprietary telephone integration; e.g. KX-TVP100)
To confirm the assigned function data
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Enter the programming access number* (0 through 9, 01 through
03, 1 and #).
• Each number corresponds to the data as follows:
- 1: Preferred Line Assignment — Outgoing
- 2: Preferred Line Assignment — Incoming
- 3: Full One-Touch Dialing Assignment
- 4: Intercom Alerting Assignment
- 5: Call Waiting Tone Type Assignment
- 6: Self-Extension Number Confirmation
- 8: Charge Fee Reference
- 9: Handset/Headset Selection
- 01: Remote Station lock Control (— Operator only)
- 02: CO Incoming Call Information Log Lock Clear
(— Operator only)
- 03: Live Call Screening Password Control†(— Operator only)
- #: Station Programming Data Default Set
- 1: Live Call Screening Mode Setting†
• The display shows the programmed data.
<Example>
When you press [5], the display shows:
(— Call Waiting tone is now programmed to Tone 1)
2. Press the HOLD (END) button.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this section.
* A programming access number is required to program/confirm the function data by Station Programming.
To confirm the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS, PF) button.
• The display shows the current status.
2. Press the HOLD (END) button.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this section.
1
2
HOLD
access number
C.W. Tone 1
1
2
HOLD

13
2.1 Programming Instructions
Station Programming Outline
†: Available when the Digital
Super Hybrid System is
connected to a Proprietary
Telephone capable
Panasonic Voice Processing
System (one that supports
proprietary telephone
integration; e.g. KX-
TVP100).
(Station Programming)
Direct Station Selection (DSS) Button
One-Touch Dialling Button
Message Waiting (MESSAGE) Button
FWD/DND Button
SAVE Button
Account Button
Conference (CONF) Button
Log-In / Log-Out Button
Hurry-Up Button
Voice Mail (VM) Transfer Button
Two-Way Record Button†
Two-Way Transfer Button†
Live Call Screening (LCS) Button†
Live Call Screening (LCS) Cancel Button†
Alert Button
Phantom Button
Night Button
One-Touch Dialling with Auto Hold Button
Terminate Button
Single-CO (S-CO) Button
Loop-CO (L-CO) Button
Group-CO (G-CO) Button
1
2
3
4
5
6
7
80
81
82
83
84
85
86
87
9
0
#
1
3
4
5
6
8
9
0
0
0
#
1
3
2
2
1
PROGRAM 99
CO
DSS
PF
CO CO
Function
PROGRAM
(F1 - F10)
88
8
8#
INTERCOM
INTERCOM
(Ringing Tone Selection for CO Button)
(Ringing Tone Selection for Intercom Button)
(Station Speed Dialling Number / Name Assignment)
(Preferred Line Assignment — Outgoing)
(Preferred Line Assignment — Incoming)
(Full One-Touch Dialling Assignment)
(Intercom Alerting Assignment)
(Call Waiting Tone Type Assignment)
(Self-Extension Number Confirmation)
(Charge Fee Reference)
(Handset / Headset Selection)
(Remote Station Lock Control)
— see “Operator Service Features” (Section 4.3)
(CO Incoming Call Information Log Lock Clear)
— see “Operator Service Features” (Section 4.3)
(Live Call Screening Password Control)†
— see “Operator Service Features” (Section 4.3)
(Station Programming Data Default Set)
(Live Call Screening Mode Setting)†
(Exit)

14
2.2 Programming
Charge Fee Reference
Allows you to see, print out and clear charges. Charges are displayed per extension, CO line,
account code, department code, or the total of each can be referred to. There are seven
corresponding features as follows:
[PROGRAM] [99] [8] [ID Code] [1] Extension Charge Fee Reference
[2] CO Line Charge Fee Reference
[3] Total Extension Charge Fee Reference
[4] Account Code Charge Fee Reference
[6] All Clear
[7] Print the Charge Fee
[8] Account Code Set
Conditions
• System Programming determines the extension that can see charges.
• An identification code (ID code), set by System Programming, is required to see charges.
• The first display format – METER or CHARGE (AS$) – is selected by System
Programming. This can be switched manually at each extension.
• You may use the overlay while programming. In this case, the HOLD button becomes the
END button and the REDIAL button becomes the PREV button.
• The currency denomination is programmable by System Programming.
• If a different rate is assigned to each CO line, the extension charge fee, account code charge
fee and total extension charge fee meters will not be displayed correctly. In this case, the
meter is calculated by the rate assigned to CO1 and is displayed.
Programming References
• System Programming —Installation Manual & Installation Manual Addendum
[015] Charge Rate Fractional Point Assignment
[016] Charge Rate Assignment
[117] Charge Display Selection
[118] Charge Verification Assignment
[119] Charge Verification ID Code Set
[125] Assignment of Denomination

15
2.2 Programming
Flexible Button Assignment
Alert Button (Assignment)
Allows you to assign a Flexible (CO) button as an Alert button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO) button which you wish to assign as
an Alert button.
2. Dial 87.
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Hurry-Up Button (Assignment)
Allows you to assign a Flexible (CO) button as the Hurry-Up button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the Flexible (CO) button which you wish to assign as the
Hurry-Up button.
2. Dial 81.
• The display shows:
3. Enter the extension number (2 digits through 4 digits).
• The display shows:
(— xxxx: extension number)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
1
2
3
AUTO DIAL
STORE
8
7
1
2
Hurry up to-
CLR
Hurry up to-xxxx
1
8
4
AUTO DIAL
STORE
3
extension number

16
2.2 Programming
†: Available when the Digital Super Hybrid System is connected to a
Proprietary Telephone capable Panasonic Voice Processing System
(one that supports proprietary telephone integration; e.g. KX-TVP100)
Conditions
• You cannot enter a non-existent extension number.
• Hurry-Up button can be used only by the operator.
Live Call Screening (LCS) Button (Assignment)†
Allows you to assign a Flexible (CO) button as a Live Call Screening button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO) button which you wish to assign as a
Live Call Screening button.
2. Dial 85.
• The display shows:
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Live Call Screening (LCS) Cancel Button (Assignment)†
Allows you to assign a Flexible (CO) button as a Live Call Screening Cancel button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO) button which you wish to assign as a
Live Call Screening Cancel button.
2. Dial 86.
• The display shows:
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
LCS
1
2
3
AUTO DIAL
STORE
8
5
1
2
3
8
6
LCS Cancel
AUTO DIAL
STORE

17
2.2 Programming
Log-In / Log-Out Button (Assignment)
Allows you to assign a Flexible (CO) button as the Log-In / Log-Out button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the Flexible (CO) button which you wish to assign as the Log-
In / Log-Out button.
2. Dial 80.
• The display shows:
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Night Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Night button.
Pressing the Night button allows you to switch between the day mode and night mode.
The button indicator turns on when the night mode is assigned and turns off when the day
mode is assigned.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS) button you wish to assign as
the Night button.
2. Dial 8.
•The display shows:
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Condition • “Class of Service ” programming determines the extensions that can perform this feature.
Programming References
• System Programming —Installation Manual & Installation Manual Addendum
[513] Night Service Access [601] Class of Service
1
2
3
8
0
Login/Logout
AUTO DIAL
STORE
1
2
3
AUTO DIAL
STORE
Night
8

One-Touch Dialing with Auto Hold Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as an One-Touch Dialing with Auto
Hold button.
During a conversation, the call is put on hold and transferred to the assigned number.
You can make a call to the assigned number by pressing this button as well as pressing the
One-Touch dialing button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS, PF) button you wish to assign
as an One-Touch Dialing with Auto Hold button.
2. Dial 8#.
3. Dial the desired number.
• Up to 16 digits can be stored.
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
Phantom Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as the Phantom button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS) button which you wish to
assign as the Phantom button.
2. Dial 88.
• The display shows:
3. Dial the phantom extension number.
• The display shows:
(— xxxx: phantom extension
number)
18
2.2 Programming
1
2
3
Phantom extension number
8
8
EXT-
CLR
EXT-xxxx
CLR
1
2
8
3
Dial the desired number
4
AUTO DIAL
STORE

19
2.2 Programming
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button while in the programming
mode.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The phantom extension number must be assigned in program [130] “Phantom Extension
Number Assignment” before assigning the Phantom button.
• A DSS button can be assigned as the Phantom button so that the operator can use it for
transferring a call.
• If you assigned the Phantom button to one of the CO buttons (13 through 24) on your KX-
T7230 telephone and change the telephone to a KX-T7235 model, you must re-program the
setting as the KX-T7235 telephone has only 12 CO buttons. If you do not change the
setting, the phantom extension call reaches the INTERCOM button.
Programming References
• System Programming — Installation Manual Addendum
[130] Phantom Extension
Terminate Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as the Terminate button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS, PF) button which you wish to
assign as the Terminate button.
2. Dial 9.
• The display shows:
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
4
AUTO DIAL
STORE
1
2
3
9
AUTO DIAL
STORE
Terminate

20
2.2 Programming
†: Available when the Digital Super Hybrid System is connected to a
Proprietary Telephone capable Panasonic Voice Processing System
(one that supports proprietary telephone integration; e.g. KX-TVP100)
Two-Way Record Button (Assignment)†
Allows you to assign a Flexible (CO, DSS) button as a Two-Way Record button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS) button which you wish to
assign as a Two-Way Record button.
2. Dial 83.
• The display shows:
3. Enter the extension number of the Voice Mail system.
• The display shows:
(— xxxx: VM extension number)
• To erase the entry, press the CLR (S2) button or the TRANSFER
(CLEAR) button.
(The TRANSFER (CLEAR) button becomes the CLEAR button when using the
overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• You cannot enter a non-existent extension or a floating number.*
• The voice mail extension number is acceptable, if the number is assigned in program [127].
Programming References
• System Programming — Installation Manual Addendum
[127] Voice Mail Extension Number Assignment
* Floating Number (FN) is a virtual extension number for a resource to make it appear to be an extension.
Refer to the Installation Manual.
1
2
4
3
VM extension number
2 WAY-REC:
CLR
83
2 WAY-REC:xxxx
CLR
AUTO DIAL
STORE