Panasonic EH-XR10 User manual

Operating Instructions
(Household) The RF Ultrasonic Device
Model No. EH‑XR10
English........................................................3
中文 ...........................................................23
EH-XR10_HK.indb 1 2020/01/24 18:17:44

2
EH-XR10_HK.indb 2 2020/01/24 18:17:44

3
English
Operating Instructions
(Household) The RF Ultrasonic Device
Model No. EH‑XR10
Thank you for purchasing this Panasonic product.
Before operating this unit, please read these instructions completely and save them for future use.
Safety precautions..................... 4
Before use............................................9
Parts identication ............................10
Modes and their applications........... 11
Preparation......................................... 11
How to use .........................................13
How to move the head in each mode
.............................................................16
After use.............................................17
Frequently asked questions.............18
Separately sold Gel ...........................19
Troubleshooting ................................20
Battery life..........................................22
Removing the built-in rechargeable
battery.................................................22
Specications ....................................22
Contents
EH-XR10_HK.indb 3 2020/01/24 18:17:44

4
English
Safety precautions
To reduce the risk of injury, loss of life, electric shock, re,
and damage to property, always observe the following
safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the
level of hazard, injury, and property damage caused when
the denotation is disregarded and improper use is performed.
DANGER
Denotes a potential
hazard that will result in
serious injury or death.
WARNING
Denotes a potential
hazard that could result
in serious injury or death.
CAUTION
Denotes a hazard that
could result in minor
injury or property
damage.
The following symbols are used to classify and describe
the type of instructions to be observed.
This symbol is used to alert users to a specic
operating procedure that must not be performed.
This symbol is used to alert users to a specic
operating procedure that must be followed in order
to operate the unit safely.
DANGER
►Preventing accidents
Never use this appliance near electronic
medical devices or home electrical therapy
devices such as the following:
· Pacemakers and other electronic medical
devices implanted in the body
· Heart‑lung machines and other life‑supporting
electronic medical devices
· Wearable electronic medical devices, such as
electrocardiographs and intravenous drip equipment
‑ Doing so may cause incorrect operation of
electronic medical devices and home electrical
therapy devices, resulting in accidents or causing
patients to feel unwell.
EH-XR10_HK.indb 4 2020/01/24 18:17:45

5
English
WARNING
►To prevent skin or health problems
The following persons should not use this
appliance:
· Individuals with heart disease
· Individuals with a nervous disorder in their face
· Individuals with hemorrhagic disease, hemophilia
or other blood disorder
· Individuals undergoing treatment on their teeth
· Babies, toddlers or other child in the growth stage,
or other individual who cannot indicate intent
· Individuals with aftereffects in the head due to a
trafc accident, etc.
‑ Doing so may cause accidents or causing patients
to feel unwell.
The following persons should not use this
appliance:
· Persons with allergies
· Persons with sensitive skin
· Persons with skin diseases or atopic dermatitis
‑
Doing so may cause problems with the skin or body.
The following persons should not use this
appliance:
· Pregnant women or within one month of childbirth.
‑ Doing so may cause skin trouble due to hormonal
imbalance.
The following persons should not use this
appliance:
· Individuals without sense of heat
‑ Doing so may cause burn.
Do not use this appliance in the following body
area or following cases.
· When you do not feel well
· When you are taking medicine or when you are
very tired
· Areas with skin damage, eczema or swelling
· When there are abnormalities on the skin such
as dermatitis or extreme sunburns
· Body parts where epilation or shaving was
performed on the same day
· Where surgery (plastic, cosmetic, etc.) has been
performed
· Forehead (usable on forehead in RF mode only),
lips, eyelids, ears, and neck
‑ Doing so may cause problems with the skin, body,
or eyes.
EH-XR10_HK.indb 5 2020/01/24 18:17:45

6
English
WARNING
The following individuals must consult a doctor
prior to use:
· Individuals with serious disease
· Individuals with acute disease
· Individuals with febrile disease
· Individuals with infectious disease
· Individuals with malignant tumors
· Individuals who, within the last 2 weeks, have
undergone beauty treatment or some treatment
by a clinic requiring a recovery period or have had
treatment that caused severe redness in the skin
· Individuals with disturbance of perception due to
a high degree of peripheral circulatory failure
such as diabetes
If you feel pain or abnormality on your skin or
other part of your body, immediately stop using
this product.
‑ Failure to do so may cause accidents or skin/
physical trouble.
The appliance has a heated surface. Persons
insensitive to heat must be careful when using
the appliance.
‑ Failure to do so may cause burn.
►This product
Do not use in proximity of ammable materials
(such as alcohol, benzine, thinner, spray, nail
polish remover).
‑ Doing so may cause re or burn.
This product has a built-in rechargeable battery.
Do not throw into re or apply heat.
Do not charge, use, or leave in high temperatures.
‑ Doing so may cause overheating, ignition, or explosion.
Do not store within the reach of children. Do
not let them use it.
‑ Otherwise, small parts may be accidentally
swallowed, thus causing accidents or injuries.
Do not modify or repair.
‑ Doing so may cause re, electric shock, or injury.
Contact Panasonic authorized service center for
repair (battery change etc.).
Never disassemble except when disposing of
the product.
‑ Doing so may cause re, electric shock, or injury.
►In case of an abnormality or malfunction
Immediately stop using and remove the adaptor
if there is an abnormality or malfunction.
‑ Failure to do so may cause re, electric shock, or injury.
<Abnormality or malfunction cases>
• The main unit, adaptor or cord is deformed or
abnormally hot.
•
The main unit, adaptor or cord smells of burning.
• There is an abnormal sound during the use of
the main unit, adaptor or cord.
‑ Immediately request inspection or repair at an
authorized service center.
EH-XR10_HK.indb 6 2020/01/24 18:17:45

7
English
WARNING
►Power supply
Do not connect or disconnect the adaptor to a
household outlet with a wet hand.
‑ Doing so may cause electric shock or injury.
Do not immerse the main body and AC adaptor
in water or wash it with water.
Do not use or store the appliance in a bathroom
or location with high humidity. Also, do not
place in a location where water may spill (such
as top of a vanity).
‑ Doing so may cause electric shock or re.
Never use the appliance if the AC adaptor is
damaged or if the power plug ts loosely in a
household outlet.
Do not damage or modify, or forcefully bend,
pull, or twist the cord or the power plug. Also,
do not place anything heavy on or pinch the
cord or the power plug.
‑ Doing so may cause electric shock or re due to a
short circuit.
Do not use anything other than the supplied AC
adaptor for any purpose.
Also, do not use any other product with the
supplied AC adaptor. (See page 10.)
‑
Doing so may cause burn or re due to a short circuit.
Do not use in a way exceeding the rating of the
household outlet or the wiring.
‑ Exceeding the rating by connecting too many
plugs to one household outlet may cause re due
to overheating.
Always ensure the appliance is operated on an
electric power source matched to the rated
voltage indicated on the AC adaptor.
Fully insert the adaptor or appliance plug.
‑ Failure to do so may cause re or electric shock.
Always unplug the adaptor from a household
outlet when cleaning.
‑
Failure to do so may cause electric shock or injury.
Regularly clean the power plug and the appliance
plug to prevent dust from accumulating.
‑ Failure to do so may cause re due to insulation
failure caused by humidity.
Disconnect the adaptor and wipe with a dry cloth.
►Take care of the following precautions as well
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
‑ Failure to do so may cause an accident or injury.
EH-XR10_HK.indb 7 2020/01/24 18:17:45

8
English
WARNING
The supply cord cannot be replaced. If the cord
is damaged, the AC adaptor should be scrapped.
‑ Failure to do so may cause an accident or injury.
CAUTION
►Power supply
Do not allow metal objects or trash to adhere to
the power plug or the appliance plug.
‑ Doing so may cause electric shock or re due to a
short circuit.
Do not wrap the cord around the adaptor when
storing.
‑
Doing so may cause the wire in the cord to break with
the load, and may cause re due to a short circuit.
Disconnect the adaptor or the appliance plug
by holding onto the adaptor or the appliance
plug instead of the cord.
‑ Disconnecting by holding onto the cord may
cause electric shock or injury.
Disconnect the adaptor from the household
outlet when not charging.
‑
Failure to do so may cause electric shock or re due to
electrical leakage resulting from insulation deterioration.
►Note the following precautions
Do not allow the ultrasonic probe or RF poles
to make contact with metals.
‑ Doing so may cause burn.
Do not drop or hit against other objects.
‑ Doing so may cause injury.
Do not use continuously for an extended
period on the same area.
‑ Doing so may cause injury to the skin, infection,
inammation, bleeding, pigmentation or other
trouble, or worsening of such symptoms.
Before using, check that the ultrasonic probe is free
from cracks, chips, deformities, and other damage.
‑ Failure to do so may cause injury to the skin.
Excluding the arm used for a patch test, use
only for care of the cheeks, face line, and
forehead (in RF mode only).
‑ Failure to do so may cause skin damage,
inammation, etc.
EH-XR10_HK.indb 8 2020/01/24 18:17:45

9
English
Handling of the removed battery when disposing
DANGER
•The rechargeable battery is exclusively for
use with this appliance. Do not use the battery
with other products.
•Do not charge the battery after it has been
removed from the product.
•Do not throw into re or apply heat.
•Do not hit, disassemble, modify, or puncture
with a nail.
•Do not let the positive and negative terminals
of the battery get in contact with each other
through metallic objects.
•Do not carry or store the battery together with
metallic jewellery such as necklaces and hairpins.
•Do not use or leave the battery where it will be
exposed to high temperatures, such as under
direct sunlight or near other sources of heat.
•Never peel off the tube.
‑
Doing so may cause overheating, ignition, or explosion.
WARNING
After removing the rechargeable battery, do not
keep it within reach of children and infants.
‑ The battery will harm the body if accidentally
swallowed.
If this happens, consult a physician immediately.
If the battery uid leaks out and comes in contact
with the eyes, do not rub the eyes, and thoroughly
rinse with clean water, such as tap water.
‑ Failure to do so may cause eye injury.
Consult a physician immediately.
CAUTION
If the battery uid leaks out and comes in
contact with the skin or clothes, rinse off with
clean water, such as tap water.
‑ Failure to do so may cause inammation.
Before use
• The following symbol indicates that a specic detachable
power supply unit is required for connecting the electrical
appliance to the supply mains. The type reference of
power supply unit is marked near the symbol.
►Usage frequency
• Use this appliance up to 12 minutes total for all modes
(RF/Ultrasonic mode and RF mode) once during a day.
Use up to 3 times per week and wait at least 1 day
between each use.
Overusing the appliance will actually hurt your skin.
►Skin precautions
• Before use, perform a skin allergy test using the
conductive gel or some skin care product in place of the
gel. (See page 11.)
This quick test checks for any potential skin issues
before you begin using the appliance normally.
EH-XR10_HK.indb 9 2020/01/24 18:17:45

10
English
• Please use this appliance with bare skin (after removing
make‑up and washing your face).
•
Please check the condition of your skin while using this
appliance.
When having abnormal sensation on skin, stop using the
appliance immediately and consult a physician.
Skin issues can be attributable to stress, body condition,
visceral disease, skin care products, and other factors. Seek
professional medical attention if you have any skin issues.
►RF warmth level
•
The ultrasonic probe increases in temperature as the RF
warmth level is increased.
Select the desired RF warmth level according to your skin
conditions and personal preferences.
When using the appliance for the  rst time or if any skin
discomfort occurs, you are advised to adjust the RF warmth
level to “LOW”.
►Sensors
•
This appliance is equipped with a sensor to detect that the
ultrasonic probe is making proper contact with the skin.
Over‑care prevention sensor: Noti es the user when the
ultrasonic probe has made contact with the skin for too long.
Fitted contact sensor: Noti es the user when the ultrasonic
probe is not in contact with the skin.
(See page 15.)
►Accessories
•
Before using the appliance, be sure to remove any jewellery
such as earrings on your face or around your neck.
Parts identi cation








 








Main body
1RF Pole
2Head
3Ultrasonic probe with
warm sensation
(Ultrasonic probe)
• Provides ultrasonic
energy and warmth.
4Frame
5
RF & temperature
indicator (Blue)
6RF & temperature
select switch
• Works together with
the RF level to adjust
the warmth from the
ultrasonic probe.
Mode indicator (Blue)
POWER/SELECT
switch

Charging indication/
noti cation lamp ( )
(Red)
Appliance socket
AC adaptor (RE6-37)
(The shape of the AC
adaptor differs
depending on the area.)
Adaptor
Power plug
Cord
Appliance plug
Stand
Accessory

Conductive gel (EH-4R01)
(See page 19.)
EH-XR10_HK.indb 10 2020/01/24 18:17:45

11
English
Modes and their applications
Select the mode appropriate to the desired application.
Mode RF/Ultrasonic RF
Area of
application
Face line, cheeks,
and mouth
• Do not use on the
forehead.
Forehead
Function RF × Ultrasonic
energy × Vibration RF
Usage
time 10 min. 2 min.
Preparation
Skin (Allergy) test procedure
Make sure to check compatibility of this appliance with
your skin as this product is normally used together with
conductive gel. Skin care products you normally use can
also be used in place of the gel.
This check must be performed to ensure you experience
no skin issues as a result of use.
• Testing is required for each of your skin care products.
Conductive gel
Skin
Gel
1
1Clean the test area (inner arm) with soap
and water, and dry it with a towel.
2
2
Apply the conductive gel or skin care product.
• Apply a light amount just enough to cover the head.
3
3
Turn on the power and make contact with your
skin.
1.Turn on the power and select the RF/Ultrasonic
mode. (See page 13.)
2.Once the appliance has completed the preheating
process, press the ultrasonic probe onto your skin
and slowly move the appliance in a circle for
approximately 10 seconds. (See page 14.)
• The head vibrates.
EH-XR10_HK.indb 11 2020/01/24 18:17:46

12
English
4
4
After charging is completed, unplug the
adaptor from the household outlet and unplug
the appliance plug from the main body.
(for safety and to reduce energy usage)
• Charging the battery for more than 2 hours will not
affect battery performance.
<To check if charging is completed>
If you remove and reinsert the appliance plug while
charging, the charging indication/noti cation lamp ( )
glows and turns off after approximately 5 seconds.
<Charging periods>
• Once the battery runs low, the charging indication/
noti cation lamp ( ) will  ash once per second.
Once the battery is nearly depleted completely, an
audible alarm will be triggered. Charge the
appliance immediately.
• Once fully charged, the appliance can be used
approximately 3 times. (in RF/Ultrasonic mode and
RF mode)
However, the usage time may be reduced
depending on the usage environment.
Notes
•
When charging the appliance for the  rst time or when it
has not been in use for more than 6 months, the
charging time may change or the charging indication/
noti cation lamp ( ) may not glow for a few minutes. It
will eventually glow if kept connected.
• Recommended ambient temperature for charging is
15 °C – 35 °C. It may take longer to charge or the
battery may fail to charge properly in extremely high or
low temperatures. (See page 21.)
3. Remove the appliance from the skin and then press
onto your skin and move the appliance for another
10 seconds.
• Once you have  nished this procedure, allow the
gel or skin care product to naturally dry.
4
4Wait 48 hours without using the appliance.
• Do not allow the affected area to become wet and
do not scrub this area.
If any skin issues occur within 48 hours
Do not continue to use the conductive gel or skin care
product.
Charging
1
1Insert the appliance plug into
the appliance socket.
2
2
Mount the main body in the
stand.
3
3Insert the adaptor into a
household outlet.
• Check that the charging
indication/noti cation lamp ( ) is
glowing.
• Charging is completed after
approx. 2 hours.
The charging indication/
noti cation lamp ( ) turns off.
1
2
3
EH-XR10_HK.indb 12 2020/01/24 18:17:46

13
English
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
How to use
Use the appliance on clean skin after thoroughly
removing makeup and washing your face.
• A tone will be triggered after the POWER/SELECT
switch is pressed or the sensor operates.
•
Warming may fail when the ambient temperature is below
15 °C.
1
1Press the switch and select a mode.
• Each press switches to the next mode. The selected
mode  ashes in blue.
• Select the mode appropriate to the desired
application. (See page 11.)
RF/
Ultrasonic
RF OFF
• The appliance starts in RF/Ultrasonic mode each time
the power is turned on.
•
The appliance will not turn on when the AC adaptor is
connected.
• Make sure to use the appliance with the frame attached.
2
2Press the switch and select an RF
warmth level to start the preheating process.
• Each press switches to the next level. (The selected
mode  ashes in blue.)
• The ultrasonic probe increases in temperature as
the RF warmth level is increased.
LOW MED HIGH
Memory function
The previously selected RF warmth level is stored in
memory so that the appliance can be used with the
same setting.
This memory function will reset when the appliance has
not been used for a long period of time or when the
battery has ran out.
EH-XR10_HK.indb 13 2020/01/24 18:17:47

14
English
3
3Apply the conductive gel while the appliance
is preheating.
• We recommend using a conductive gel that helps
transmit RF and ultrasonic energy.
1.Apply a macadamia nuts size
(approximately 3 g) of gel into your
hand.
2.Spread the gel around the areas of
your face that you want to treat with
this appliance as illustrated by the
areas in the  gure.
• Spread conductive gel gently on
your face. Do not rub gel into skin.
Daily skin care products can also be used
• Use the conductive gel or skin care products to help
transmit the RF and ultrasonic energy to the skin.
• Use skin care products that will provide a slippery
surface for the appliance.
Skin care products with large amounts of oil can
obstruct the transmission of RF and ultrasonic energy.
Gel, serum, and milky lotion Cream, toner, lotion, and oil
• If friction begins to develop during use, add some more
skin care product to prevent any negative effects on
the skin due to friction.
4
4Preheating process completes (takes
approximately 1 minute).
The preheating process will  nish approximately 1
minute after turning on the power. A tone will be
triggered, and indicators change from  ashing to
glowing states to indicate that the appliance is ready.
Glowing Glowing Glowing
LOW MED HIGH
Notes
• The appliance can be used on the skin even while
indicators are  ashing. The lamps will begin glowing
once contact is made with the skin.
• An alert tone will be triggered 15 seconds after the
appliance is not in contact with the skin. Then, the power
will automatically turn off after approximately 1 minute.
Changing the level after the preheating process
completes
The level changes with each pressing of the .
LOW MED HIGH
• Select an appropriate level while paying attention to
the condition of skin.
EH-XR10_HK.indb 14 2020/01/24 18:17:47

15
English
5
5Once the preheating process completes,
press the appliance onto your skin and
begin moving it around. (See page 16.)
The power will be automatically turned off after each
mode is completed.
• Press the POWER/SELECT switch to change the
mode or turn off the power midway through.
How to apply the head properly
• Apply the appliance to the skin as
both ultrasonic probe (a) and frame
(b) are making complete contact.
• Press the appliance tightly to the
skin as both ultrasonic probe and
frame are contacting the skin in
parallel.
The head vibrates except in RF
mode.


• RF and Ultrasonic are only effective when the
head is vibrating.
Note
• Head vibration produces sound, which is just normal
operation.
Situations of an alert sound triggering followed by
vibration stopping
Remove and press the ultrasonic probe on your skin
again if either of the following notications occur.
►Over-care prevention sensor
The ultrasonic probe has been in contact with your face
for approximately 15 seconds.
►Fitted contact sensor
The ultrasonic probe has not made contact with the skin
for approximately 15 seconds.
An alert will trigger and the power will turn off after
approximately 1 minute if the appliance continues in
either of these states.
EH-XR10_HK.indb 15 2020/01/24 18:17:47

16
English
How to move the head in each mode
RF/Ultrasonic mode - Approximately 10 minutes
(5 seconds per each movement shown by arrow in the gure)
Face line
Mouth to
temples
(Approx. 8 min.)
Move the appliance as your cheeks
are gently lifted upward.
(Repeat directions 1through .)










(A tone will be triggered 2 minutes before
automatic power off.)
Mouth
(Approx. 2 min.)
Move the appliance upward around your
face lines as your mouth is gently lifted
upward.
(Repeat direction through .)






(A tone will be triggered.)
Automatic power off
RF mode - Approximately 2 minutes
(5 seconds per each movement shown by arrow in the gure)
Forehead
(Approx. 2 min.)
Move from the center of forehead as
indicated by 1and 2 in the gure
towards temples.
• Press the upper edge of the head
above the eyebrows as indicated by
3, 4, 5, and 6 in the gure. Gently
move the appliance upward.
(Repeat directions 1through 6.)





(A tone will be triggered.)
Automatic power off
Note
• If friction begins to develop during use, add some more
conductive gel to prevent any negative effects on the
skin due to friction.
EH-XR10_HK.indb 16 2020/01/24 18:17:47

17
English
After use
Cleanse the gel from the face.
• After cleansing off gel from the face, use your daily
skin care products to condition your skin.
• If you used a daily skin care product instead of the
conductive gel, you do not need to cleanse it off.
• After using the appliance, make sure to clean the main
body and frame.
• Check if the power is turned off.
1
1Pinch the frame to remove.
• If gel is making it dif cult to
remove the frame, wipe off excess
gel and then remove the frame.
2
2Clean the head.
Use a tissue or similar to wipe off
gel or skin care product.
• Use a tissue, cotton swab, or
similar to remove any gel or skin
care product that has gotten into
gaps.
3
3Attach the frame.
Align the four notches (b) with the
tabs () on the head and then
press the frame onto the head until
it clicks into place.
• Orient the frame so that the  at
side (a) faces up. 


click
4
4Store the main body in the stand.
Notes
• The main body cannot be washed with water.
• If you are concerned that the main body is dirty, use a
cloth soaked with soapy water to wipe the dirt. Wring out
the cloth before wiping.
• Do not use alcohol, nail polish remover, or detergent
(ex. liquid hand soap), etc. to clean the appliance.
Doing so may cause failure, cracking or discoloration of
parts.
• Make sure to remove all excess gel or skin care product.
Failure to do so can cause hardening when this excess
material dries.
EH-XR10_HK.indb 17 2020/01/24 18:17:48

18
English
Checking ultrasonic energy is transmitted in RF/
Ultrasonic mode
Transmission of ultrasonic energy cycles on and off for
approximately 1 second for each phase, but this will not
be felt by the skin. Use the following procedure to check
transmission of ultrasonic energy.
1.Place a few drops of water on the
ultrasonic probe (a).
• Orient the ultrasonic probe so that it
is level.
• We recommend that you use water
to check as it is more difcult if using
gel.
• Do not allow any other parts beside
the ultrasonic probe to come into
contact with water.

2. Turn on the power and select the RF/Ultrasonic mode.
3. Use your nger to lightly press
on the ultrasonic probe (a)
until the ultrasonic probe is
approximately the same height
as the frame (b).


4. Conrm the transmission.
• The water droplets will vibrate if the
appliance is operating properly.
(The vibration cycle lasts for
approximately 1 second.)
Frequently asked questions
Question Answer
What is RF and
ultrasonic energy?
RF is an acronym for radio
frequency. This is a type of
high‑frequency energy.
Ultrasonic energy includes
sound frequencies over
20 000 Hz that cannot be
heard by the human ear.
Can I use this
appliance on my
hands and other
areas of the body?
This product has been
designed specically for use
on the face. Use this product
only for beautifying the face.
Can I use the
appliance more
frequently than once
a day?
Use this appliance up to 12
minutes total of all modes (RF/
Ultrasonic mode and RF
mode) once during a day.
Use up to 3 times per week
and wait at least 1 day
between each use.
Overusing the appliance will
actually hurt your skin.
Why do I need to
apply gel or skin care
product?
This material helps transmit
the RF and ultrasonic energy
to the skin.
(Any air between the
ultrasonic probe and the skin
causes the RF and ultrasonic
not be transmitted.)
EH-XR10_HK.indb 18 2020/01/24 18:17:48

19
English
Question Answer
Can I use some other
type of gel or milky
lotion?
While we recommend that use
the conductive
gel, serum,
milky lotion, and gel can also
be used. (See page 14.)
What type of skin
care products should
I use after using this
appliance?
Apply the skin care products
you normally use on a daily
basis after using this appliance.
Is it OK to charge the
battery after every use?
The battery in this appliance is
a lithium‑ion battery, and so
charging it after every use will
not affect battery service life.
What should I do if
the gel causes
staining or I develop
skin issues?
Do not use the appliance until
the skin condition clears. (We
recommend that you seek
professional medical attention.)
You may have sensitive skin.
Skin issues can also occur
due to your physical condition,
stress, body condition, and
visceral disease.
What should I do if I
feel tooth pain?
Use of this appliance may
cause discomfort if you have
any cavities.
Do not use the appliance until
you have had any cavities
treated.
(We recommend that you seek
professional medical attention.)
Separately sold Gel
Conductive Gel (EH-4R01)
EH-XR10_HK.indb 19 2020/01/24 18:17:48

20
English
Troubleshooting
Problem Possible cause Action
The power does not turn on even
after the POWER/SELECT switch
is pressed.
The appliance has not been charged. Charge the appliance.
(See page 12.)
The AC adaptor is connected. Disconnect the AC adaptor before
use.
The appliance can only be used
for a few minutes after charging.
The battery has reached the end of its life.
(approximately 3 years) (See page 22.)
Please contact the store where
purchased.
(Customers cannot replace the
battery as doing so may cause
malfunction.)
The RF & temperature indicator,
mode indicator, and charging
indication/notication lamp ( )
ashes once per second, and then
the appliance stops operating.
The protection function in the main body
has operated, and the appliance has
stopped abnormally.
Turn off the power and turn it on
again after some time has
passed.
If the symptom occurs repeatedly,
contact an authorized service center.
The RF & temperature indicator
turns off during use.
The power will be automatically turned
off after each mode is completed.
After the preheating process completes,
the power automatically turns off if no
contact with the skin has been made for
approximately 1 minute.
A sensor has operated.
Conrm that you are making
proper contact with the skin.
(See page 15.)
There is no power remaining in the battery.
Charge the appliance.
(See page 12.)
EH-XR10_HK.indb 20 2020/01/24 18:17:48