Pandigital PANSCN09 User manual

PORTABLE WAND SCANNER
WITH FEEDER DOCK
User Guide
PANSCN09

2
What’s in the Box
Check the package for the following items. If there are any items missing or damaged, please
contact your place of purchase immediately.
Wand Scanner
Feeder Dock
AC Power Adapter
2 AA Battery Pack
USB Cable
microSD
TM
Card with Adapter
Cleaning Cloth
Presto! PageManager Software
Quick Start Guide
User Guide
Included microSD Card Folder Structure
PD_SCAN
DCIM

100PHOTO (for storing scanned photo .jpg files)

200DOC (for storing scanned document .pdf files)
Pandigital

Documentation
QSG (Scanner Quick Start Guide)
UG (Scanner User Guide)

Software
PM# (Presto! PageManager Software)
PageManager program folders
UG-E_PANSCN09_v1.1_11-11

3
Table of Contents
What’s in the Box.................................................................................................................................2
Included microSD Card Folder Structure ..........................................................................................2
Read This First.....................................................................................................................................5
Read This First.....................................................................................................................................5
Important Safety Precautions...........................................................................................................5
Introduction..........................................................................................................................................6
microSDTM (SDHC) Cards ....................................................................................................................6
Battery Performance............................................................................................................................6
Scanner Overview................................................................................................................................7
Power and Scan Indicator Light .........................................................................................................9
Getting Started.....................................................................................................................................9
Turning the Scanner Off............................................................................................................10
Considerations for all Scanning.......................................................................................................10
Suitable and Unsuitable Original Types .........................................................................................11
Access your Scanned Images on SD Card....................................................................................11
Scanned Image File Naming Convention.......................................................................................11
Sheet-fed Scanning with Feeder Dock.............................................................................................12
Wand Scanning (hand-held)..............................................................................................................13
Preview Scanned Images on LCD Screen .......................................................................................14
Set Preview Mode ..........................................................................................................................15
Change the Preview mode:.......................................................................................................15
View Scanned JPG Images as Slideshow......................................................................................15
View Scanned JPG Images Individually.........................................................................................15
Menu - Settings ..................................................................................................................................16
Resolution.......................................................................................................................................16
Color Mode.....................................................................................................................................16
Save Format...................................................................................................................................16
LCD Off...........................................................................................................................................17
Power Saving .................................................................................................................................17
Orientation (best used for PDF scans)...........................................................................................17
Anti-mirror (wand scans only).........................................................................................................18
Card Format ...................................................................................................................................18
Auto-crop (sheet-fed scans only)....................................................................................................19
Language........................................................................................................................................20
Calibration (as needed only)...........................................................................................................21
Factory Default...............................................................................................................................21
About..............................................................................................................................................21
Use of Protective Sleeves (optional)................................................................................................21
Connect Scanner to a Computer......................................................................................................22
Computer System Requirements ...................................................................................................22
Connect with Windows Vista or Windows 7 ...................................................................................22

4
Connect with Windows XP .............................................................................................................23
Connect with Macintosh Computer.................................................................................................24
Safely Disconnect the Scanner (Macintosh) .............................................................................24
Presto! PageManager ........................................................................................................................24
Features .........................................................................................................................................24
System Requirements....................................................................................................................25
Install the Software.........................................................................................................................25
Launch the Software.......................................................................................................................25
Using the Annotation function.........................................................................................................26
Using Presto! Wrapper...................................................................................................................27
Using the Optical Character Recognition (OCR) Function.............................................................28
Setting Preferences........................................................................................................................28
Back up/Restore Files ....................................................................................................................29
Restore Files.............................................................................................................................29
Uninstall PageManager..................................................................................................................29
Clean the Scanner and Feeder Dock................................................................................................29
Calibrate the Scanner (Wand Scan mode).......................................................................................30
Error Messages..................................................................................................................................31
Frequently Asked Questions ............................................................................................................31
Technical Specifications ...................................................................................................................34
Storing the Scanner...........................................................................................................................35
Limited Warranty................................................................................................................................35
NewSoft’s End User License Agreement.........................................................................................37

5
Read This First
Please read the following important safety instructions carefully before using the scanner. Failure
to observe these instructions may result in personal injuries or damages to the scanner.
Important Safety Precautions
Always follow these basic safety precautions when using your scanner. This reduces the risk
of fire, electric shock, and injury.
Do not place this device under direct sunlight or near heat sources, such as in a
closed car under sunlight or near a stove. The outer casing of this device may
become deformed and the sophisticated sensors inside may become damaged
due to excessive heat.
Do not use this device near water, in the rain or allow any liquid to get inside
this product. Water and moisture may cause short-circuit to the electronic
components and lead to malfunctions.
Do not use this device in dusty environments. Dust grains may cover this device
and scratch the original. Do not scan originals that are contaminated by dusts or
other particles.
Do not use this device near strong electromagnetic sources, such as a
microwave oven or television. The electromagnetic interference may cause this
device to malfunction.
Do not attempt to disassemble or modify this device. There are no user
serviceable parts inside this scanner, and unauthorized modifications void your
warranty.
Do not drop or apply shock/vibration to this device. Strong impacts may
damage the components inside.
Do not insert objects other than compatible memory cards into the memory card
slots of this scanner. The metal contacts inside the slots can easily become
damaged by foreign objects.
Do not use an unknown power adapter other than the one supplied with this
scanner. Connecting this scanner to an unknown power adapter is very
dangerous and may lead to fire or explosion.
Some adapter models may include switchable prongs. When necessary to use
alternate prongs, use only the prongs included with the scanner.
Recommend using 2 AA Alkaline or 2 NiMH rechargeable batteries.
WARNING: Never mix battery types as this could cause damage or fire.
It is recommended to always use the same brand for both batteries.
Do not cut, bend, modify, place heavy objects, or step on the cable of the power
adapter. Otherwise the external insulation may be damaged and result in short-
circuit or fire.
The power socket and USB port on this scanner are designed solely for
connecting to the supplied power adapter and optional USB cable. Do not insert
any other objects into these sockets.
If there are strange odors or heat emitting from this device or any signs of
malfunction, disconnect this scanner from the power immediately and contact
your dealer for inspection or service.

6
Introduction
Together at last – now you can have the scan-anything anywhere advantages of a battery-
powered wand scanner and the superior ease and quality of a sheet-fed scanner all in one
fashionable solution.
This portable wand scanner quickly and easily makes digital copies of documents, receipts, books,
photos, recipes and more…anytime, anywhere!
Featuring a built-in color LCD preview screen to confirm you’ve captured what you intended, as
well as Pandigital’s ScanRiteTM roller tracking technology to guide your hand-held scans perfectly
to produce straight high-resolution digital copies.
microSDTM (SDHC) Cards
For simplicity purposes in this document, references to the “microSDTM (SDHC) card” may
simply be listed as “SD card”.
The scanner supports up to 32GB microSDTM (SDHC) cards.
The number of images that can be stored on an SD card varies by original size and various
settings available. The table below shows the estimated average number of images that can be
stored on a 2GB SD card:
2GB
SD card
4x3” original (3.5MP) 5x7” original (5.0MP) 8x10/A4 original (8+MP)
300dpi
color/BW 600dpi color/BW 300dpi color/BW 600dpi color/BW 300dpi color/BW 600dpi color/BW
JPEG 5,600 2,360 3,940 1,620 1,386 560
PDF 5,600 2,360 3,940 1,620 1,386 560
Battery Performance
The scanner accepts 2 AA batteries (recommend 2 Alkaline or 2 NiMH rechargeable).
WARNING: Never mix battery types as this could cause damage or fire.
It is recommended to always use the same brand for both batteries.
The scanner does NOT recharge rechargeable batteries.
The batteries are only needed for hand-held wand scanning.
The battery performance varies by battery type, original size, and various settings available.
The expected average performances (based on A4 size, color, 300/600 dpi) are:
Alkaline batteries – 100 scans (tested with Duracell MN1500)
Rechargeable batteries – 300~350 scans (tested with Duracell DX1500)
Batteries are not required to operate the scanner when it is engaged in the feeder dock, so an
unlimited number of sheet-fed scans can be performed when using the feeder dock.

7
Scanner Overview
Scanner top
No. Name Function/ Description
 Power and scan
indicator light
Indicates the operating status of the scanner and SD card. (Refer to
“Power and Scan Indicator Light” on page 9.)
 LCD display Displays all operational menus and options.
 Up arrow Enters Menu screen from Scan Ready screen.
Used to navigate “backward” through images and menu options.
 Power Button
Press to turn on the scanner.
Used to accept options choices in Settings and Preview options.
Press and hold for 3 seconds to turn off the scanner.
 Battery Bay Cover
Slide to remove cover for battery access. Accepts 2 AA batteries;
recommend 2 Alkaline or 2 NiMH rechargeable.
The scanner does NOT recharge rechargeable batteries.
 Mini USB port Connect scanner to your computer via USB cable (included) to copy
scanned images from the SD card to your computer.
 microSD card slot Insert microSDTM card for storing your scanned images.
 Down arrow Enters Display mode from Scan Ready screen.
Used to navigate “forward” through images and menu options.
Back arrow Returns to previous screens or exits from Display mode or Settings
menu.
Scanner bottom
No. Name Function/ Description
 Feed Sensor Rollers
Hand-held Wand scans: the rollers are part of Pandigital’s
ScanRiteTM roller tracking technology for guiding your scans.
Sheet-fed with Feeder Dock: the rollers work with the feeder dock
feed sensor rollers to feed originals through the feed slot.
 Contact Image Sensor
(CIS)
The sensor that scans your originals, whether using scanner as wand
scanner or with the feeder dock.
 








8
Feeder Dock
No. Name Function/ Description
 Scanner latch Secures the scanner in the feeder dock. Press down on latch to insert
and release scanner.
 Feed Sensor Rollers Feeds originals through device while scanning. The rollers are sensors
and should only be rolled in one direction.
 Scanner connector Press scanner onto connector to engage scanner with feeder dock.
 Orientation guide Shows correct alignment and orientation for feeding original (printed
side up).
 Feed Slot
Insert original into the feed slot to begin scanning.
A
lways align
original printed side up straight against left edge of the feed dock and
firmly contact the sheet-fed roller for better auto-crop imaging.
 Photo edge guides Shows edge positions for feeding standard 3.5”x5” or 4”x6” photos in
portrait orientation.
 Photo edge guide Shows edge position for feeding 4”x6” photos in landscape
orientation.
A4 document guide Shows edge position for feeding A4 size documents.
 Guide Slide
Slide the guide up to the right edge of the original before inserting
original into the feed slot to ensure proper alignment of original
when scanning.
Scanner engaged in Feeder Dock





 
Back of feed slot (original output)
Front of feed slot (original input)
A
lways align originals against left edge of slot
DC jack
5V, 1.0A

9
Power and Scan Indicator Light
The indicator light patterns and the functions they indicate are as follows:
Off = scanner is off or scanner is on and ready for use
Orange briefly = powering on (wait until the initialization process completes before using
the scanner)
Green, steadily on = scanning in progress (300dpi)
Orange, steadily on = scanning in progress (600dpi)
Green or Orange flashing = processing scanned image
Red, flashing = no SD card (insert SD card), SD card full, card error, no scan performed
after initiating wand scan mode, or low battery (replace batteries).
Getting Started
1. Remove the scanner from the feeder dock:
a) Press the latch.
b) Lift the end of the scanner up to clear the latch.
c) Pull the scanner out of the feeder dock to
disengage from the connector.
2. Remove the foam pad from end of scanner and taped cushion inside feeder dock.
3. Insert batteries (the scanner does not recharge rechargeable batteries):
a) Remove the cover.
b) Insert batteries (note correct + - directions in scanner).
c) Replace the cover.
4. Insert a SD card.
5. Press to turn scanner on.
6. It is recommended that you read the “Considerations for all Scanning” section on page 10
before attempting your first scan.
When you transition the scanner to and from the feeder dock, it is required to shut down and
restart the scanner.
Batteries are not required to operate the scanner when it is engaged in the feeder dock.
ac
b
a
bc

10
Turning the Scanner Off
To turn the scanner off, press and hold for three seconds.
Now you can safely remove the SD card from the scanner.
The scanner has a power-saving feature which automatically turns the scanner off
when it’s left idle for a specified number of seconds (if not connected to a computer). To
set the Power Saving time, see the “Set the Power Saving Time” section on page 17.
Considerations for all Scanning
Always insert a SD card before scanning.
Do not remove the SD card or disconnect the power supply while the indicators are blinking.
If the SD card is full, the indicator light blinks red and LCD displays “Card Full”. Use another
card or delete some files on it if necessary.
The scanner only accepts SD cards in FAT16 or FAT32 file system. NTFS and other file
systems are not supported.
This scanner supports output images in JPG and PDF formats. (The date & time attributes are
always a fixed date & time assigned during production, not current date & time.)
Scanning the same original in different orientations may produce scanned images that look
slightly different in color tones and brightness. This is not a malfunction.
After beginning to feed an original into the feeder dock, the scanner pauses briefly and then
completes the scan. This is by design and is not a malfunction.
Keep the original flat and level when feeding to prevent possible jamming.
Keep originals free from finger prints, oil, dirt, and dust for optimum scanned image quality.
To prevent poor cropping effect, align original straight against left edge of the feeder slot and
ensure there is adequate space behind the feeder dock for the originals to complete the scan
feed.
The scanner runs on 2 AA Alkaline or 2 NiMH rechargeable batteries. WARNING: Never mix
battery types as this could cause damage or fire.
The feeder dock requires 5V 1.0A power adapter to operate.
Batteries are not required to operate the scanner when it is engaged in the feeder dock.
The wand scan mode requires you to press to begin scanning an original, and then press
again to stop the scan.
Only the wand scan mode supports the “anti-mirror” feature.
The feeder dock’s sensor is triggered when you begin to insert an original aligned against the
left edge of the feed slot, and then the original begins to automatically feed, hesitates and then
completes the scan.

11
Suitable and Unsuitable Original Types
Suitable for Wand Scanning
The scanner used as a wand scanner (without the feeder dock) is designed to obtain
the best scanning results with photo and document originals up to 8.5”x14” size.
Suitable for Feeder Dock
The scanner used with the feeder dock is designed to obtain the best scanning results
with the following types of originals:
Photos and documents (3”x5”, 4”x6”, 5”x7”, 8”x14”)
Business cards (standard 3.5”x2” (8.9x5cm) or larger)
Unsuitable for Feeder Dock
Do not use the following types of originals for scanning in the feeder dock, otherwise
the feeder dock may malfunction or cause the original to jam in the slot.
Originals thicker than 1.0mm
Originals with either side shorter than 55mm
Originals with lots of black or dark colors
Originals with dark colors surrounding the edges
Printed media (newspapers, magazines, etc.)
Soft and thin materials (thin paper, cloth, etc.)
Originals that exceed the maximum acceptable size, 8.5”x14”.
Access your Scanned Images on SD Card
You can use the included Presto! PageManager software to view and print your scanned
images (see Presto! PageManager on page 24), or use Windows Explorer or Mac Finder
window to locate and open your scanned images, and then use a graphic program of your
choice to view, edit and print.
Remove the SD card from the scanner and connect it to a card reader attached to your
computer. Use a Windows Explorer or Mac Finder window to locate your scanned image
files.
OR
With the SD card inserted in the scanner, connect the scanner to your computer via the USB
cable. Your computer recognizes the scanner as a Removable Disk. If you have the
Pandigital SD card inserted, the volume title is PD_SCAN. Use a Windows Explorer or Mac
Finder window to locate your scanned image files.
Scanned Image File Naming Convention
After your first scans, folders titled DCIM\100PHOTO (JPG files) and DCIM\200DOC (PDF
files) are added to the SD card file structure, and the scanned images are saved in the
applicable folder.
Each scanned image is given a file name with the prefix PDI_ followed by a 4- digit
sequential number in the order the images are stored. For example, PDI_0001.JPG,
PDI_0002.JPG or PDI_0001.PDF, PDI_0002.PDF, etc.

12
If the file name reaches PDI_9999.JPG or PDI_9999.PDF in the initial folder, a new folder
titled 101PHOTO or 201DOC is automatically created to store subsequent new files, and so
on.
You can view or edit the .JPG files on the SD card by using the included Presto!
PageManager software, or by using your own graphic editing software. You can also use
the Presto! PageManager software to build a book or multiple-page PDF files.
Sheet-fed Scanning with Feeder Dock
Always place the feeder dock on a flat surface for scanning.
When scanner is engaged in the feeder dock, no battery is required to operate.
Scanning the same original in different orientations may produce scanned images that look
slightly different in color tones and brightness. This is not a malfunction.
CAUTION: Insert only one original at a time, and insert the next original only when the
previous one is done, otherwise the feeder dock may malfunction.
CAUTION: Do not scan glossy photos in humid environments (humidity higher than 70% RH);
the surface of the photo becomes sticky and may cause the feeder dock to jam.
1. Insert a SD card.
2. Insert the scanner into the feeder dock:
a) Press the latch.
b) Place the right end of the scanner into the
feeder dock and press onto the connector.
c) Press scanner down to snap under latch.
3. Insert the power adapter plug into the wall and
power connector on the end of the feeder dock.
4. Press to turn scanner on.
5. If scanning a document rather than a photo, if desired, change the file format setting to
PDF (see the “Set the Scanned Image File Format” section on page 16).
6. With the side to be scanned facing upward, place the left edge of the original straight
against the left edge of the feed slot, and then slide the guide lever against the right side
of the original.
c
ab

13
7. Gently insert the original into the feed slot; release it as soon as it begins to feed.
After the feed begins, the scanner pauses briefly and then completes the scan. This
is by design and is not a malfunction.
By default, the Preview mode is on allowing you to preview the scanned image for
2 seconds immediately after scanning. Two options appear on the screen with the
image allowing you to press to Save (default) or to Delete the image
immediately (delete confirmation displays during deletion). (See page 15 to set the
Preview mode.)
PDF scans cannot be previewed; they are always saved immediately when scan is
completed.
8. Wait until the indicator light stops blinking before inserting and scanning the next original.
Wand Scanning (hand-held)
Using the scanner as a wand scanner without the feeder dock allows you to scan a larger variety
of documents, especially those that may not fit in the feeder dock (i.e., pages of a book). It also
allows you to scan vertically or horizontally across the original, which may help you scan book
pages easier.
Our ScanRiteTM roller tracking technology makes it easy to keep the scanner steady to capture
a straight high-quality scan.
For best scanning results, always place your original on a clean flat surface.
Batteries are required to operate the scanner without the feeder dock.
If you want to scan a document vertically by sliding the scanner right-to-left (i.e., scanning book
pages), you can change the Orientation setting to Portrait so your saved images will be in the
correct orientation rather than rotated 90oleft (see the “Orientation” section on page 17.)
Scanning the same original in different orientations may produce scanned images that look
slightly different in color tones and brightness. This is not a malfunction.
1. Press to turn scanner OFF.
2. Remove the scanner from the feeder dock:
a) Press the latch.
b) Lift the end of the scanner up to clear
the latch.
c) Pull the scanner out of the feeder dock to
disengage from the connector.
a
bc

14
3. Insert a SD card.
4. Press to turn scanner ON.
5. Press again to initiate the scan mode.
6. With your original on a clean flat surface,
slowly slide the scanner across your original.
Moving the wand scanner over the original too fast causes an error and the scanner
may stop scanning. If the scan does complete, you may notice an abnormal image.
7. Press to stop the scan.
By default, the Preview mode is on allowing you to preview the JPG scanned
image for 2 seconds immediately after scanning. Two options appear on the
screen with the image allowing you to press to Save (default) or to
Delete the image immediately (delete confirmation displays during deletion). (See
page 15 to change the Preview mode.)
PDF scans cannot be previewed; they are always saved immediately when scan
is completed.
8. Wait until the indicator light stops blinking before scanning another original.
Preview Scanned Images on LCD Screen
You can quickly and easily preview your JPG scanned images on the LCD screen immediately
after a scan, or at any other time you can view all images individually or as a slideshow.
PDF scans cannot be previewed; they are always saved immediately when scan is completed.

15
Set Preview Mode
By default, the Preview mode is On, allowing you to preview the JPG scanned image for 2
seconds immediately after scanning. Two options appear on the screen with the image
allowing you to press to Save (default) or to Delete the image immediately (delete
confirmation displays during deletion).
When Preview mode is off, the JPG scanned image is saved immediately without displaying
a preview.
Scans performed with Preview mode off use less battery power, so you can expect more
scans with Preview mode off.
Change the Preview mode:
1. With the screen displayed, press to enter Menu mode.
2. Press to focus on Preview, and then press to select it.
3. Press to focus on Off, and then press to select it.
4. Press to exit.
View Scanned JPG Images as Slideshow
If there are no JPEG images on the SD card, preview is disabled.
1. With the screen displayed, press to enter Display mode.
2. The slideshow automatically begins in 4 seconds.
The slideshow continually displays the images in the alphanumeric order they are stored
on the SD card.
3. Press at any time to exit the slideshow.
You can press to display previous or next images, and then the slideshow
resumes after 4 seconds.
To pause the slideshow, press ; to restart slideshow press again.
View Scanned JPG Images Individually
1. With the screen displayed, press to enter Display mode.
2. Press to view next/previous images.
If you do not press within 4 seconds, the slideshow automatically begins.
3. Press to exit the Display mode and return to the Scan Ready screen.

16
Menu - Settings
Resolution
The scan resolution is measured in dpi (dots per inch). The higher the dpi, the more details
on the original are captured by the scanner and produce a higher quality scanned image.
However, a higher dpi also results in a larger image size and occupies more space on the
memory card.
The scanner offers two resolution modes, 300dpi (default, normal) or 600dpi (highest
resolution).
To change the scanning resolution:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to select Resolution.
4. Press to focus on the desired scan resolution, and then press to select it.
5. Press to exit.
Color Mode
The scanner offers two color modes for your scanned image, Color (default, recommended
for photos) or Black and White (recommended for text documents).
To change the scanning color mode:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to scroll to Color Mode and then press to select it.
4. Press to focus on the desired mode, and then press to select it.
5. Press to exit.
Save Format
The scanner offers two formats for your scanned image output files, JPEG (default,
recommended for photos) or PDF (recommended for text documents and books).
To change the scanned file format:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to scroll to Save Format, and then press to select it.
4. Press to focus on the desired file format, and then press to select it.
5. Press to exit.

17
LCD Off
To prevent screen burn-in, the LCD screen automatically shuts off when left idle for a
specified time (45 seconds [default], 90 seconds or 2 minutes).
After the LCD shuts off (and scanner is still on), simply press any button to turn the LCD
back on.
To change the time setting:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to scroll to LCD off, and then press to select it.
4. Press to focus on the desired setting, and then press to select it.
5. Press to exit.
Power Saving
To conserve power, the scanner automatically shuts off when left idle for a specified time (90
seconds, 3 minutes [default], or 5 minutes).
To change the time setting:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to scroll to Power Saving, and then press to select it.
4. Press to focus on the desired setting, and then press to select it.
5. Press to exit.
Orientation (best used for PDF scans)
The default scan orientation is Landscape, scanning down top-to-bottom of an original. This
orientation works best for the majority of your scanning (JPG or PDF).
or
You can also hold the scanner vertically and scan a
document from right-to-left (i.e., scanning book pages).
However, if you leave the orientation set as Landscape,
the saved image will be rotated 90oleft.

18
In Portrait mode, the images are automatically rotated 90oright before being saved,
ensuring the vertically scanned image is saved in the correct viewing orientation, thus
eliminating the need to manually rotate the saved images later.
Changing the orientation to Portrait mode is best used for PDF vertical right-to-left scans.
If you need to manually rotate saved images, you can use the included Presto!
PageManager software or your own graphic software.
Scanning the same original in different orientations may produce scanned images that
look slightly different in color tones and brightness. This is not a malfunction.
To change the orientation setting:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to scroll to Orientation, and then press to select it.
4. Press to focus on the desired orientation, and then press to select it.
5. Press to exit.
Anti-mirror (wand scans only)
This feature is only applicable when using as hand-held wand scanner.
By default, if you wand-scan an original from bottom-to-top, the image is actually captured
upside-down and backwards, and then the Anti-mirror feature automatically flips and
rotates the image before it is saved.
If desired, you can turn the Anti-mirror feature off, resulting in your scanned images saved
upside-down and backwards.
To turn Anti-Mirror off:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to scroll to Anti-mirror, and then press to select it.
4. Press to focus on Off, and then press to select it.
5. Press to exit.
Card Format
WARNING: If you reformat your memory card, all existing files on the card are deleted.
To format your SD card:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.

19
3. Press to scroll to Card Format, and then press to select it.
4. Press to select Yes.
5. To confirm, press .
6. After a successful format, the Settings screen is displayed.
7. Press to exit.
Auto-crop (sheet-fed scans only)
When using the feeder dock, the scanner has a built-in cropping function that detects and
crops dark edges of an original and dark background around an original during the scan
process (see following example).
Original
Scanned images:
Auto-crop on Auto-crop off
To prevent poor cropping effect, align original straight against left edge of the feeder slot
and ensure there is adequate space behind the feeder dock for the originals to complete
the scan feed.
Depending on the shape and size of your original, you may want to perform additional
manual cropping on the scanned image to achieve your desired final image. You can use
the Presto! PageManager software (included) or use your own graphic editing software.

20
If the original is fed slightly crooked, the original is only cropped a maximum amount per
following illustration:
When scanning darker originals, over-cropping may occur (see example of photo of the
night sky). Please insert the original in a different direction (orientation) and try again.
To change auto-crop setting:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to scroll to Auto-crop, and then press to select it.
4. Press to focus on desired mode, and then press to select it.
5. Press to exit.
Language
The scanner offers multiple languages for the user interface navigation text and menu
options.
To select a different language:
1. With the screen displayed, press to enter Menu mode.
2. Press to select Settings.
3. Press to scroll to Language, and then press to select it.
4. Press to focus on the desired language, and then press to select it.
5. Press to exit.
Original Cropped image
3mm
1.5mm
0.5mm
3mm