Pantone PTPB50Y User manual

Cannot
charge device
• Make sure the USB cable is
plugged into the output port;
unplug the USB cable and try
again.
• Try another USB charging
cable.
• Press the power on button to
turn the powerbank on.
Cannot
charge
device whilst
charging
power bank
• The power bank can not
support the output whilst being
charged. Please wait until the
power bank is fully charged or
unplug the micro USB charging
cable or USB-C charging cable
at the input port.
No LED
light when
charging
device
• Connect the power bank to
your power source to ensure
the power bank has sufficient
battery.
Product Overview
Charging
Troubleshooting
Support
BA C B D E
A. Power On Button
B. USB Port
C. USB-C Charging Port
Connect the supplied Micro USB cable to the Micro
USB charging port on the device and the other end to
a power source. You can also use a USB-C cable (not
included) to connect to the USB-C charging port on the
device and the other end to a power source to charge
the powerbank. Please charge for 2 hours to fully
charge the powerbank before use.
Connect a USB-cable (not included) to either of the USB
ports and the other end to your device. The powerbank
will start charging the connected device.
LED indicator status
User Guide
Models: PTPB50Y, PTPB50P,
PTPB50T, PTPB50N
POWER BANK
What? You mean this User Guide didn’t have ALL the answers?
Speak to us! We’d love to help you get up and running as
quickly as possible.
Call our After Sales Support on 1300 886 649.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday,
9am-6pm AEST
Well done, you made it.
Now sit back and relax... your power bank is
automatically covered by a 1-year warranty.
How nice!
LED
Battery
capacity 100-75% 75-50% 50-25% 25-0%
D. LED Indicators
E. Micro USB Charging Port

General Safety Warnings
GENERAL SAFETY WARNINGS
For the safety of yourself and others, follow all instructions and take
notice of all the warnings. When adhered to, these safety precautions can
reduce the risk of fire, electric shock and injury.
This product complies with Australian Safety standard AS/NZS 62368.1
to ensure the safety of the product.
The RCM is a visible indication of a product’s compliance
with all applicable ACMA regulatory arrangements,
including all technical and record-keeping requirements.
IMPORTANT
Plastic wrapping can be a suffocation
hazard for babies and young children,
so ensure all packaging materials are
out of their reach.
To prevent environmental factors
(dampness, dust, food, liquid etc.)
harming the speaker, only use it in
a well-ventilated, clean and dry
environment, away from excessive
heat or moisture.
Keep the product away from direct
sunlight or heat sources.
Only charge the product via the
supplied micro USB cable or USB-C
cable (not included) with a 5V power
source. Do not charge it any other
way.
In case of damage, do not
disassemble, repair or modify the
product yourself. Contact After
Sales Support for advice on repair
or replacement, or refer servicing to
qualified personnel only.
Children should be supervised to
ensure they do not play with the
product.
Do not put any object on top of the
product.
Do not place or store appliance
where it can fall or be pulled into a
bath or sink.
Do not expose the product to
microwaves.
Keep the product away from oils,
chemicals or any other organic liquids.
This product is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the product by a
person responsible for their safety.
Do not place speakers too close
to ears. Damage may occur to ear
drums, especially in young children.
Use this appliance only for its
intended purpose as described in
this guide.
Responsible disposal of the
packaging
The packaging of your product has
been selected from environmentally
friendly materials and can usually
be recycled. Please ensure these
are disposed of correctly. Plastic
wrapping can be a suffocation
hazard for babies and young
children, please ensure all packaging
materials are out of reach and are
safely disposed of. Please recycle
these materials rather than throwing
them away.
Responsible disposal of the
product
At the end of its working life, do
not throw this product out with
your household rubbish. An
environmentally friendly method of
disposal will ensure that valuable
raw materials can be recycled.
Electrical and electronic items contain
materials and substances which, if
handled or disposed of incorrectly,
could potentially be hazardous to the
environment and human health.
CAUTION
The battery in this device is non replaceable.
Output DC 5V, 2A total
Battery 3.7V, 5000mAh
Dimension 63 x 99 x 15mm
Weight 120g (approx.)
Specifications