Paragon ProStyle 2018 User manual

A531 Rev. C
OWNER’S MANUAL
ProStyle Warmer
WarmerModelNumbers:
120VUnit
2018
230VPlug Type C
2218
230VPlug Type I (AUS)
22181
230VPlug Type G (UK)
22182
www.ManufacturedFun.com
Paragon International, Inc •731 W. 18th Street •P.O. Box 560 •Nevada, IA 50201 USA
Phone [phone] •Toll-free [phone] •Fax [phone] •Email:
[e-mail]

2
ImportantOwner Information
Record the model number, serial number, and voltage in the spaces
below (the data plate is located on the operator’s side of the machine in
the bottom right). Please have this information available when calling
Paragon for service assistance.
Model No.
Serial No.
Voltage
Business Hours: 8:00 AM to 5:00 PM Central Standard Time (CST)
Telephone: [phone]
Email: [e-mail]
Fax: [phone]
Additional information can be found by visiting our web site at
www.manufacturedfun.com
Register your unit
Completing online warranty registration will prevent delay in
obtaining warranty coverage. Go to
www.manufacturedfun.com, under “Support Center” select
“Register your Product”.

3
SAFETY PRECAUTIONS
Paragon values your continued safety above all else. Please follow these
guidelines when using your equipment to prevent injury and maximize product
performance:
No direct contact to equipment by the general public should be allowed
when used in food service locations. Only trained personnel should
operate this equipment. Carefully read any and all instructions before
beginning operation of the equipment.
Always wear safety glasses when servicing equipment.
Heating element reaches extreme heat during operation. To avoid injury,
NEVER touch element and food product while hot.
Any alterations made to equipment by anyone other than qualified
personnel will void warranty and may also create unsafe working
conditions. NEVER make alterations to the equipment.
The machine must be properly grounded to prevent electrical shock.
Do NOT immerse this unit in water. Doing so may damage equipment and
prevent it from working properly.
Always unplug equipment before cleaning or servicing to prevent electric
shock.

4
INTRODUCTION
PARAGON IS PROUD TO BE YOUR
PARTNER FOR MANUFACTURED FUN.
Our goal is to provide you with the bestsolutions to attract customers,expand
your business,and improve your profits. That’s why this producthas been
specially-craftedto meetprecisespecificationsforperformance,efficiency, and
output.
Your Paragon ProStyle Warmer Features:
•Heavy duty 20 gauge stainless steelconstruction.
•Easy to clean surfaces
•Adjustablethermostat.
•7” W x 7” D x 8.5”H
•Made in the USA
Should you have any questionsabout your equipment,or would like to know
more about our other innovative concessionequipmentand supplies,please
contactus at 1-800-433-0333orvisit us on the web at Manufacturedfun.com
Thank you for your purchase and enjoy!

5
ELECTRICAL REQUIREMENTS
This product requires a properly-grounded120 volt supplywith
a 15 amp circuit. The ProStyle Warmer has a current draw of
1.67 amps or 200 watts. (Export voltage is 230VAC)
We recommend your warmer be pluggeddirectlyinto a
dedicated outlet. Extension cords may create a safety hazard
and reduce its performance.
Be sure outlet accepts three (3) prong groundedplug. DO
NOT use a three (3) prong to two (2) prong adapter.
UNPACKING
Paragon carefully inspectseach product duringassembly and
after completion to adhere to strict qualityguidelines and packs
it securely to ensure safe delivery to each of our customers. Be
sure to carefullyremove all packing material and adhesive
before any operation. Please examine your product to
guarantee all equipmenthas arrived, complete and in good
condition.
If you believe that any damage may have occurred during
shipment or parts may be missing, please contact Paragon
immediately for a replacement.

6
OPERATING INSTRUCTIONS
Be sure equipmentis connectedto properlygrounded 120volt powersupplywith
15 amp circuit.
1. Always clean unit thoroughly beforeeachuse.
2. Fill water vesselwith 2 cups ofwater.
3. Insertproductcontainer into water vessel.
4. Plug cordin, turn on warmer and adjust thermostat. This will turn on the
heating elementin the base ofthe unit and will keep your productwarm and
fresh.
5. Keepthe powerswitch in the offpositionwhen the warmer is emptyornot
being used.
WARNING:Always turn the POWERswitchto OFF when the machine is not in
use.
WARMER CARE
It is recommendedthat the warmer be cleanedout daily using suitable cleaners
that may be usedon foodserviceequipment.
•Always make sure the machine is offand unpluggedbeforecleaning
NEVER use water on the electrical components inthe base.

7
Switch
Heating Element
Power Cord
230V Parts
121091
97200
12145 (Plug Type C) 12186 (Plug Type I (AUS)) 12187 (Plug Type G (UK))