Parat PARASYNC User manual
31 Waterloo Avenue |Berwyn, PA 19312 |T: 610-647-5976 |F: 610-296-2504 |paratsolutions.com
USER GUIDE
PARASYNC for iPod touch®(5th and 6th generation)
30-unit Charging and Synchronization Dock
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless
performance.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPad Air, iPad mini, and Lightning
are trademarks of Apple Inc.
For assistance, please contact PARAT Solutions
Toll free: 866-647-5976
Email: support@paratsolutions.com
31 Waterloo Avenue |Berwyn, PA 19312 |T: 610-647-5976 |F: 610-296-2504 |paratsolutions.com
PARASYNC for iPod touch®(5th and 6th generation)
30-unit Charging and Synchronization Dock
Product description:
Charge and sync up to 30 Apple iPod touch®(5th and 6th generation) devices. Two auxiliary
USB ports may be used to attach USB peripherals.
31 Waterloo Avenue |Berwyn, PA 19312 |T: 610-647-5976 |F: 610-296-2504 |paratsolutions.com
CAUTION
1. If using a case, use only the approved PARASYNC PROTECTOR iPod touch®(5th
and 6th generation) case with the PARASYNC dock. An unapproved case can result in
damage to the device and/or dock. An un-cased iPod touch®(5th and 6th generation) can be
inserted into the dock.
Refer to the table below for approved case part numbers:
Model Approved PARASYNC PROTECTOR case
iPod touch®(5th generation) Parat Solutions TH21, TH21NH
iPod touch® (6th generation) Parat Solutions TH21, TH21NH
2. A PARASYNC dock loaded with thirty encased iPod touch®(5th and 6th generation) devices
can weigh up to 21 pounds. Ensure that the surface holding the dock(s) can safely support
21 pounds per dock.
3. Insert and remove each encased iPod touch®(5th and 6th generation) in a vertical direction
oriented as shown:
4. Do not stack items on top of the dock:
31 Waterloo Avenue |Berwyn, PA 19312 |T: 610-647-5976 |F: 610-296-2504 |paratsolutions.com
CASE ASSEMBLY
1. Open the case.
2. Place case front on flat surface face down, push down on back frame all around edges to
engage snaps.
Front
on a flat
sur face
Re a r
31 Waterloo Avenue |Berwyn, PA 19312 |T: 610-647-5976 |F: 610-296-2504 |paratsolutions.com
CASE DISASSEMBLY
To remove iPod touch®(5th and 6th generation):
Pry apart as shown:
31 Waterloo Avenue |Berwyn, PA 19312 |T: 610-647-5976 |F: 610-296-2504 |paratsolutions.com
OPERATION
Recommended device settings:
Model
iPod touch®
(5th and 6
th
generation)
Recommended settings when syncing with PARASYNC
Set “Open iTunes when this iPod is connected” option
listed in iTunes on the Summary tab
To charge devices:
1. Connect the AC power cord to the dock and plug into a wall outlet providing 100-240VAC,
50/60Hz, 3.5 Amps.
2. Turn Power switch to the “ON” position.
3. Turn off each device and then insert FIRMLY into a slot.
Note: Each socket has a status indicator. Refer to section “Status Indications” below
for more information.
To sync devices:
1. If the dock is already charging devices without a computer connection, skip to step 3.
2. Follow steps 1 through 3 from section “To charge devices”.
3. Connect the included USB cable from an Apple computer USB port to the USB port for
computer connection on the dock.
4. Use Apple iTunes®or Apple Configurator® to sync devices.
Note: The devices may not charge while a computer is connected to the dock. You can
charge the units without a computer by simply unplugging the USB cable to the
computer after syncing completes.
Each socket has a status indicator. Refer to section “Status Indications” below for
more information.
To turn the dock off:
1. If the dock is connected to a computer, verify that syncing operations are complete and then
disconnect the dock from the computer.
2. Turn Power Switch to the “OFF” position.
Status Indications:
Status
Steady Red
Steady Green
Blinking Violet
Blinking Blue
Display Function
Charging
Charged/Socket Available
Computer connection/disconnection detected
Computer connection active
31 Waterloo Avenue |Berwyn, PA 19312 |T: 610-647-5976 |F: 610-296-2504 |paratsolutions.com
SECURE MOUNTING
The PARASYNC for iPod®touch (5th and 6th generation) dock has features that allow for
optional secure mounting to a firm surface.
To securely mount the dock:
1. Verify that the mounting surface can safely support 21 pounds per mounted dock.
2. Drill four holes in the mounting surface that line up with the four #6-32 threaded inserts on
the bottom of the dock (see below for locations and dimensions in inches):
3. To secure the dock to the mounting surface:
A. Remove the four screws from the mounting feet.
B. Insert four #6-32 screws through the holes drilled in the mounting surface from step 2
C. Install screws into the threaded inserts on the bottom of the dock leaving the mounting
feet in place.
NOTE: Maximum screw penetration into the dock measured from the bottom surface is ¼”.
Z410096 REV C
Table of contents
Other Parat Docking Station manuals
