Paris Rhone PE-TM002 User manual

WARNING
1. Make sure the probe is inserted into meat, exceeding
the safety line. Do not put the probe in the oven alone
because the probe will be damaged by high temperature.
2. The charging base should be placed within 3 meters of
the probe, otherwise the Bluetooth signal cannot be received.
WIRELESS SMART
MEAT THERMOMETER
User Manual
3. Do not use the probe in the microwave oven.
4. Do not wrap the probe in a tinfoil.
6. Don’t burn the black part with fire, it can only
withstand 300°C (572°F), or it will be damaged.
5. Probe will be very hot during or just over a cook.
DO NOT touch it with bare hands.
Withstand Max 300°C (572°F)
PE-TM002
Questions or Concerns?
[email protected]

1. Toggle the switch on the base to the ON position.
2. Remove the probe from the base and insert it into meat.
3. Place meat in an oven, air fryer, or frying pan.
4. Turn on Bluetooth on your phone, launch the Aicooking
APP, and Select PE-TM002.
5. Set and monitor the temperature in the APP.
6. To disconnect, charge the probe, close the APP or turn
off Bluetooth on your phone.
Note:
After use, clean and put the probe back into the base.
Toggle the switch to the OFF position for charging.
Q1: Can't find the probe on the Bluetooth list?
A: 1) Make sure Bluetooth is enabled on the Phone and
both Bluetooth and GPS are enabled on the Android
phone.
2) Ensure that the charging base is within 3 meters of
the probe.
WARRANTY
FAQ
SERVICE
Download the APP How to Use
P
IOS10.0 and above, Android5.0 and above.
Search "Aicooking" in App Store or Google play or scan
the following QR code.
A P DOWNLOADP
NOTE:
· The APP does not have a cloud server and will not
automatically collect customer private information.
· Please allow location access and turn on Bluetooth
while installing and using the APP.
Thanks for choosing Paris Rhône Wireless Smart Meat
Thermometer.
This product is covered with Paris Rhône product and
labor warranty for 12 months from the date of its original
purchase.
If you need any further information or assistance,
please feel free to contact us directly, we will reply you
at the very first time and do our best to solve it.
Q2: Can the black part of the probe be roasted with fire?
A: No, fire will melt the black part of the probe.
Q3: Do I still need to reset the menu when the Bluetooth
signal has lost its connection?
A: No, APP will update the data automatically, as long as
you receive the drop alert and connect to APP in time.
Rev_1.0_EN
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources. Household users should contact
either the retailer where they purchased this product, or their local government
oce, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for
disposal.
Insert Meat APP Set Done
Toggle On Take Out
the Probe
ON/OFF Input 5V Battery LED
[email protected]
Manufacturer: Shenzhen Danya Technology Co.,Ltd.
Address: Room 3323, Building C, Galaxy World
Phase II, Minle Community, MinZhi Street, Longhua
District, Shenzhen, China
www.parisrhone.com
Made in China

尺寸：50*100 mm
折页
128g 铜版纸