Parklio Brain User manual

PARKLIO™ BRAIN
USER MANUAL

Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability,
Parklio™ reserves the right to make changes to the products described in this doc-
ument without notice. Parklio does not assume any liability that mayoccur due to
the use or application of the product(s) or circuit layout(s) described herein.
Trademarks
Parklio™ is a trademark of Amplico d.o.o.
Other brand and product names are registered trademarks or trademarks of their
respective holders.
2

3
Thank you for the condence you have shown
us by purchasing our Parklio Brain.
Dear Customers,
We hope that all your expectations of this product will be fullled. Parklio™
Chain is manufactured using the latest technologies and has undergone rigorous
quality control procedures.
Please read this manual rst!
The User Guide will help you use your product quickly and safely.
•Read the user manual before installing and using your product.
•Always follow the safety instructions.
•Keep this user manual at hand for future reference.

4
TABLE OF CONTENTS
......
Table of Contents...................................................................................................4
Package Contents..................................................................................................5
Features....................................................................................................................6
Hardware Overview................................................................................................7
Technical Specication..........................................................................................8
Hardware Setup.......................................................................................................9
Before You Begin...........................................................................................................................9
Input/output list.............................................................................................................................9
Connecting steps..........................................................................................................................9
Dimensions...............................................................................................................10
Reset and Add Parklio Brain................................................................................11
Installing the application.....................................................................................12

5
1. Package Contents
The product package should contain the following items:
If any of the parts are incorrect, missing, or damaged, contact your Parklio™ deal-
er. Keep the carton, including the original packing materials, in case you need to
return the product for repair.
Table 1.1 - Package Contents
Parklio™ Brain 2.4 GHz Antenna
NOTE
• A 2mm or 3 mm at head screwdriver and a 8mm wrench is needed for installa-
tion

6
2. Features
Parklio™ Brain is a universal electronic module that will turn any existing products
into a smart one. Parklio™ Brain enables control of the existing parking solutions
with a smartphone. By integrating the module, it will be possible to benet from
all the advantages of smart Parklio™ solutions - control via free smartphone app,
key sharing options, real-time information, user-friendly management and possi-
bility of integration with any other systems. With this assistive technology solu-
tion, automatic and reliable access control is possible on all existing facilities with
Parklio™ Brain. With this smart electronic module, the user is never more than a
few seconds away from any piece of digital information. From parking product sta-
tus to occupancy information, it is all there in an instant. The brain makes products
smartphone-controlled, with a key sharing option. All the smart parking options
offered by Parklio™ can now be integrated with your existing parking products.
Parklio™ brain is a universal and unique electronic model so it can t all your out-
dated products. You will be able to control your existing parking products with
your smartphone and enjoy all the functionalities the system is providing. After
making phones and homes “smart”, it is time to make parking products smart with
Parklio™ Brain. Implementing a new hardware solution like a Parklio™ Brain is a
short and easy consuming process. Parklio™ Brain can be interfaced with a mo-
bile phone or with the Parklio™ Gateway to be controlled from Parklio™ CMS. In
this way, monitoring of your parking products has never been easier. The Parklio™
Brain is installed in the access control’s solution control panel and interfaces with
the existing control board. It is rated for operation in environments with tempera-
tures ranging from -20 °C to +60 °C and it allows smartphone-controlled on the
range of 50 m in open space with the provided antenna.

7
3. Hardware Overview
Figure 3.1 - Status and connection board
Figure 3.1 - Connection and status board
Power terminal Connectors for powering the Parklio Brain
Output terminals for providing open/close command to the device controlled
by Parklio Brain
SMA female connector for connecting the 2.4 GHz antenna provided with the Parklio
Brain
Input terminals for receiving info about the device controlled by Parklio Brain
Hold to reset the Parklio Brain to the default settings
RED light - Parklio Brain is powered on
GREEN light - activity of the Parklio Brain
Input terminals
Relay terminals
Antenna connector
Reset button
Power LED
Status LED
1
2
3
4
5
6
7

8
4. Technical Specication
Parameter
Input Voltage
Working temperature range
Ingress rating
LED
DC Current (Typ.)
Working humidity
Dimensions
Wireless Connectivity
Inrush current
Operating altitude
Weight
Over-the-Air upgrades
Antenna interface
Color
Max. supported connections
Battery backup
Standards
8 VDC ~ 32 VDC
e -20 °C - +60 °C
IP 44
1 x power LED, 1 x status LED
~20 mA normal operation, add 2 mA for each active pullup
maximum 100 mA
Up to 90 % RH
31.25 mm x 70 mm x 89.6 mm (H x W x D)
BLE
0.5 A
1000 m
100 g
Yes
External 2.4 GHz antenna with SMA connector
Light grey and black
max. 4 user may be connected to the device
CR1620, for clock only, non-user replaceable
RoHS compliant
DIN EN 60715 TH35,
DIN VDE 0470-1,
DIN 43880 unit 1,
REACH compliant,
VBG 4,
IEC 529
Value
Regulatory standards EN60950-1:2006 + A1:2010 + A11:2009 + A12:2011
EN 300 328
EN 300 440
EN 301 489 - 1
EN 301 489 - 3
EN 301 489 - 17
EN 55024
EN 55032
EN 61000-6-3
EN 61000-3-2
EN 61000-6-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-3-3
Table 4.1 - Technical Specications

9
5. Hardware Setup
To connect the Parklio brain to the desired control unit, use cables up to 1mm
5.1. Input/output list
2
5.2. Connecting steps
Before You Begin
V+
Step 1
Positive power supply input
Connect the V+ terminal on the Parklio Brain to the VDC (9-32VDC) terminal on the control
unit.
Connector for external antenna
Negative power supply input
Input/output terminal, can be congured through the mobile application
Input/output terminal, can be congured through the mobile application
Input/output terminal, can be congured through the mobile application
Connect the COM terminal on the Parklio Brain to the COM terminal on the control unit.
Input/output terminal, can be congured through the mobile application
Connect the provided antenna to the ANT connector on the Parklio Brain.
(Antenna needs to be previously mounted on the desired spot!)
COM
Step 2
ANT
Step 3
IO 0
IO 1
IO 2
IO 3
Table 5.1 - Input/output list
Table 5.2 - Connecting steps

10
6. Dimensions
69 31.25
88.6

11
To reset the Brain, Press and hold a Reset button on the Parklio Brain until the
Green light turns on.
To add the Parklio Brain, click to add a new device through the Parklio Connect
mobile application, and search for the device with the name stated on your Parklio
Brain or scan the QR code from the Parklio Brain.
7. Reset and Add Parklio Brain
Parklio | Smart parking solutions
e: [e-mail] | w: www.parklio.com
m: + 385 97 724 7276

12
Or on the following links:
Android - http://bit.ly/2iMkIn5
iOS - https://apple.co/2iaV7aA
Android
iOS
7. Installing the application
The application can be downloaded by scanning the following QR codes:
This section will provide detailed instructions on how to connect the mobile appli-
cation with a product and how to control a product using the free Parklio connect
mobile application.

13
To use Parklio Connect the user needs to be logged in. An user may login with
an existing Google account, an Apple account, or the user may create and use a
Parklio account with their email.
7.1. Register and login
To login via Google simply press the Sign in with Google button.
To login via Apple account simply press the Sign in with Apple ID button.
If the user has an existing Parklio account enter your email and password associat-
ed with the account into the corresponding elds and press Login.
In case a Parklio account has not been created previously press the Sign Up button
which will open a new screen. There the user may input his email and password to
create an account. After an account has been created the user may use his creden-
tials to login into the application.

14
After logging in the dashboard containing all your parklio devices will be displayed.
7.2. Adding a product to your account
To add a product to the account press the +button on the top right corner of
the dashboard. The Add parking product screen opens and the smartphone starts
scanning for nearby Parklio devices. This step should be done in close proximity to
the Parklio device you are adding.
Grayed out devices represent Parklio devices that are already set up. When the
scanning is complete select the device you wish to add from the list of available
devices. The device will be set up automatically and added to the users account.
In the above example screenshot by clicking on Parklio BPCFYEL the application
starts the process of setting a product up. The process is automatic and the user is
notied at the end.

15
To be able to operate your product, view the state and change your product set-
tings it is necessary to connect to your product.
This is done by going to the Dashboard and clicking on your product to connect to.
7.3. Connecting to your product
After a successful connect the screen will show a product status:
•PARKLIO LOWERED - Indicates your product is down (open)
•PARKLIO EXTENDED - Indicates your product is up (closed)
•PARKLIO EXTENDING - Indicates your product is moving up (closing)
•PARKLIO LOWERING - Indicates your product is moving down (opening)
•AUTHENTICATION FAILED - There was an error with communication to your
product or with your product digital key, the key was probably reset

16
Change the device name
Change auto-close settings
Parklio devices allow the user to change their name, so they can be more easily
identied. To change the device name click on the DEVICE TITLE in the settings.
Change the name of the device and click SAVE. The new name will now be dis-
played.
To enable barrier auto-close toggle the auto-close button. A warning message will
be displayed. To change the auto-close interval press the Auto-close Time button.
The user may choose an auto-close time interval form 5 s to 120 s.

17
Key sharing
An important feature of all Parklio products is the option for key sharing. The appli-
cation allows the owner of the device to share the digital key of his device.
To use this feature an internet connection is required. It is not required to be
connected to a barrier via bluetooth.
All keys have a validity period, the key becomes active at the start date and is valid
until the end date. A key may be shared to multiple users and multiple keys may
be sent to one user.
In order to share a key press the Share Key button on the main barrier screen.
The rst step is to enter the email of the user to whom the key will be shared or to
choose from the list of previously shared users.
Next, it is required to select the key START TIME and END TIME using the calendar.
After the start and end time are set press the Share Key button and conrm.

18
Blocking shared keys
If it is necessary to remove access from a user to whom a key was shared it is pos-
sible to do this from the Parklio Connect application.
To use this feature an internet connection is required. It is not required to be
connected your product via bluetooth.
In the Device Settings > Share Digital Key screen, press the View all shared Dig-
ital Keys at the bottom of the screen. All keys shared for the selected device are
displayed. To block a certain user click on the Block button next to the user. Share
keys can also be viewed from the Device Settings screen by clicking on Shared
Digital Keys.

19
Product information
Removing your product
Product information such as the Barrier ID and Firmware version is displayed at
the bottom of the settings screen.
In order to remove a product from your account or to delete a key which was shared
to you enter the Device Settings screen and press the garbage can icon. A conr-
mation will pop up, press Yes.
When a device is deleted from your account all sent guest keys are still valid.
They can only be invalidated by performing a product key reset or when a prod-
uct is added to another account.