Parklio Brain User manual
Parklio™ Brain
User manual
Trademarks
Parklio™ is a trademark of Amplifico d.o.o.
Other brand and product names are registered trademarks or trademarks of their respective
holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, Parklio™
reserves the right to make changes to the products described in this document without notice.
Parklio™ does not assume any liability that may occur due to the use or application of the
product(s) or circuit layout(s) described herein.
2
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
Thank you for the confidence you have shown us by purchasing our Parklio Brain.
Please read this manual first!
Dear Customers,
We hope that all your expectations of this product will be fulfilled. Parklio™ Brain is
manufactured using the latest technologies and has undergone rigorous quality control
procedures.
The User Guide will help you use your product quickly and safely.
Read the user manual before installing and using your product.
Always follow the safety instructions.
Keep this user manual at hand for future reference.
3
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
Table of Contents
Table of Contents 4
Package Contents 5
Features 6
Hardware Overview 7
Technical Specification 8
Hardware Setup 10
Before You Begin 10
Input/output list 10
Connecting steps 10
Dimensions 11
Reset and Add Parklio Brain 12
4
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
1. Package Contents
The product package should contain the following items:
Table 1.1 - Package Contents
If any of the parts are incorrect, missing, or damaged, contact your Parklio™ dealer. Keep the carton,
including the original packing materials, in case you need to return the product for repair.
NOTE
●A 2 mm or 3 mm flat head screwdriver and a 8mm wrench is needed for installation
5
Parklio™ Brain
2.4 GHz Antenna
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
2. Features
Parklio™ Brain is a universal electronic module that will turn any existing products into a smart
one.
Parklio™ Brain enables control of the existing parking solutions with a smartphone. By
integrating the module, it will be possible to benefit from all the advantages of smart Parklio™
solutions - control via free smartphone app, key sharing options, real-time information,
user-friendly management and possibility of integration with any other systems.
With this assistive technology solution, automatic and reliable access control is possible on all
existing facilities with Parklio™ Brain. With this smart electronic module, the user is never more
than a few seconds away from any piece of digital information. From parking product status to
occupancy information, it is all there in an instant.
The brain makes products smartphone-controlled, with a key sharing option. All the smart
parking options offered by Parklio™ can now be integrated with your existing parking products.
Parklio™ brain is a universal and unique electronic model so it can fit all your outdated
products. You will be able to control your existing parking products with your smartphone and
enjoy all the functionalities the system is providing. After making phones and homes “smart”, it
is time to make parking products smart with Parklio™ Brain.
Implementing a new hardware solution like a Parklio™ Brain is a short and easy consuming
process. Parklio™ Brain can be interfaced with a mobile phone or with the Parklio™ Gateway to
be controlled from Parklio™ CMS. In this way, monitoring of your parking products has never
been easier. The Parklio™ Brain is installed in the access control’s solution control panel and
interfaces with the existing control board. It is rated for operation in environments with
temperatures ranging from -20 °C to +60 °C and it allows smartphone-controlled on the range
of 50 m in open space with the provided antenna.
6
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
3. Hardware Overview
Figure 3.1 - Status and connection board
Table 3.1 - Connection and status board
7
1
Power terminal
Connectors for powering the Parklio Brain.
2
Input terminals
Input terminals for receiving info about the device controlled by Parklio Brain
3
Relay terminals
Output terminals for providing open/close command to the device controlled by Parklio
Brain
4
Antenna connector
SMA female connector for connecting the 2.4 GHz antenna provided with the Parklio
Brain
5
Reset button
Hold to reset the Parklio Brain to the default settings
6
Power LED
RED light - Parklio Brain is powered on.
7
Status LED
GREEN light - activity of the Parklio Brain
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
4. Technical Specification
8
Parameter
Value
Input Voltage
8 VDC - 32 VDC
DC Current (Typ.)
~20 mA normal operation, add 2 mA for each active pullup
maximum 100 mA
Inrush current
0.5 A
Working temperature range
-20 °C - +60 °C
Working humidity
Up to 90 % RH
Operating altitude
1000 m
Ingress rating
IP 44
Dimensions
31.25 mm x 70 mm x 89.6 mm (H x W x D)
Weight
100 g
LED
1 x power LED, 1 x status LED
Wireless Connectivity
BLE
Over-the-Air upgrades
Yes
Antenna interface
External 2.4 GHz antenna with SMA connector
Color
Light grey and black
Max. supported connections
max. 4 user may be connected to the device
Battery backup
CR1620, for clock only, non-user replaceable
Standards
RoHS compliant
DIN EN 60715 TH35,
DIN VDE 0470-1,
DIN 43880 unit 1,
REACH compliant,
VBG 4,
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
Table 4.1 - Technical Specifications
9
IEC 529
Regulatory standards
EN60950-1:2006 + A1:2010 + A11:2009 + A12:2011
EN 300 328
EN 300 440
EN 301 489 - 1
EN 301 489 - 3
EN 301 489 - 17
EN 55024
EN 55032
EN 61000-6-3
EN 61000-3-2
EN 61000-6-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-3-3
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
5. Hardware Setup
Before You Begin
Placement of the Brain is very important. The brain has a possibility to be mounted on a DIN rail. Brain is
not supposed to be exposed to direct weather conditions.
Before connecting Brain, ensure that the device in which the Brain is going to be embedded is
disconnected from the power supply.
5.1. Input/output list
To connect the Parklio brain to the desired control unit, use cables up to 1mm2.
Table 5.1 - Input/output list
5.2. Connecting steps
Table 5.2 - Connecting steps
10
V+
Positive power supply input
COM
Negative power supply input
ANT
Connector for external antenna
IO 0
Input/output terminal, can be configured through the mobile application
IO 1
Input/output terminal, can be configured through the mobile application
IO 2
Input/output terminal, can be configured through the mobile application
IO 3
Input/output terminal, can be configured through the mobile application
Step 1
Connect the V+ terminal on the Parklio Brain to the VDC (9-32VDC) terminal on the control
unit.
Step 2
Connect the COM terminal on the Parklio Brain to the COM terminal on the control unit.
Step 3
Connect the provided antenna to the ANT connector on the Parklio Brain.
(Antenna needs to be previously mounted on the desired spot!)
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
6. Dimensions
FIgure 6.1 - Dimensions of the Parklio Brain
11
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
7. Reset and Add Parklio Brain
To reset the Brain, Press and hold a Reset button on the Parklio Brain until the Green light turns
on.
To add the Parklio Brain, click to add a new device through the Parklio Connect mobile
application, and search for the device with the name stated on your Parklio Brain or scan the
QR code from the Parklio Brain.
12
Parklio | Smart parking solutions
e: [email protected] | w: www.parklio.com
m: + 385 97 724 7276
Other manuals for Brain
1
Table of contents
