Parkside 86738 User manual

IAN 86738
ANGLE GRINDER PWS 230 A1
WINKELSCHLEIFER
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung
ANGLE GRINDER
Operation and Safety Notes
Translation of original operation manual
SZLIFIERKA KĄTOWA
Wskazówki dotyczące obsługi i bezpieczeństwa
Tłumaczenie oryginalnej instrukcji obsługi
KOTNI BRUSILNIK
Navodila za upravljanje in varnostna opozorila
Prevod originalnega navodila za uporabo
ÚHLOVÁ BRUSKA
Pokyny pro obsluhu a bezpečnostní pokyny
Překlad originálního provozního návodu
UHLOVÁ BRÚSKA
Pokyny pre obsluhu a bezpečnostné pokyny
Preklad originálneho návodu na obsluhu

GB Operation and Safety Notes Page 5
PL Wskazówki dotyczące obsługi i bezpieczeństwa Strona 19
SI Navodila za upravljanje in varnostna opozorila Stran 33
CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 47
SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 61
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 75
Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the
device.
Przed przeczytaniem proszę rozłożyć obie strony z ilustracjami, a następnie proszę zapoznać się z wszy-
stkimi funkcjami urządzenia.
Pred branjem obe strani s slikami odprite navzven in se nato seznanite z vsemi funkcijami naprave.
Před čtením si odklopte obě dvě strany s obrázky a potom se seznamte se všemi funkcemi přístroje.
Pred čítaním si odklopte obidve strany s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.

A B
4
2
6
3
11
12
5
7
1
4
8 9 10

E
G
C
0
1
F
H
19
14
15
16
13
3
17
20
D
18
12

5GB
Table of contents
Introduction
Proper use............................................................................................................................................Page 6
Features and equipment.....................................................................................................................Page 6
Included items .....................................................................................................................................Page 6
Technical information..........................................................................................................................Page 6
General safety advice for electrical power tools
1. Workplace safety...........................................................................................................................Page 7
2. Electrical safety...............................................................................................................................Page 7
3. Personal safety................................................................................................................................Page 8
4. Careful handling and use of electrical power tools.....................................................................Page 8
5. Service.............................................................................................................................................Page 9
Safety advice for all uses....................................................................................................................Page 9
Safety advice relating to kickback.....................................................................................................Page 10
Special safety advice relating to grinding and disc-cutting..............................................................Page 10
Further special safety advice for disc-cutting.....................................................................................Page 11
Special safety advice for abrading using sandpaper ......................................................................Page 11
Special safety advice for polishing....................................................................................................Page 11
Special safety advice for working with wire brushes........................................................................Page 12
Safety advice for angle grinders........................................................................................................Page 12
Advice on use......................................................................................................................................Page 13
Preparing for use
Attaching the disc guard cover using the quick-release fastener.....................................................Page 14
Attaching the auxiliary handle ...........................................................................................................Page 14
Attaching and replacing roughing/grinding/cutting discs ............................................................Page 15
Operation
Switching on and off...........................................................................................................................Page 15
Maintenance and cleaning...............................................................................................Page 15
Service...............................................................................................................................................Page 16
Warranty.........................................................................................................................................Page 16
Disposal............................................................................................................................................Page 16
Declaration of Conformity/Manufacturer..........................................................Page 17