Parrott talkpro max User manual

Fold
Fold
Fold
Fold
Fold
Fold
Parrott®
TalkPro Max
Headset
User Guide
2Choosing a Side
1Connecting Your Headset
to Your PC
Insert the plugs as shown in the drawing. The pink
plug is inserted into the microphone input ( ),
and the lime green plug is inserted into the line
output (speaker) ( ) of the PC sound I/O port.
Part #: 201030A
A/W#: 201031A
Art size: 16" x 5.25"
Fold size: 4" x 5.25"
Color: 1/1 Black
Paper Stock: 65lb. Finch White Opaque Vellum Cover
Determine the side of your head you would prefer
to locate the microphone. Swivel the microphone
boom as shown.
If you have headset questions, please contact:
VXI Corporation Technical Support [phone]
Headquarters [phone]
email [email protected]
website www.vxicorp.com
3
Adjust the headband to fit your head
by sliding it in or out. Swivel to
adjust the position of the micro-
phone boom and bend the boom
so that the microphone is
close to your mouth.
Position the microphone so it
is located one finger-width
from the corner of your
mouth, with the white dot
facing your mouth.
Adjustment
Volume

Fold
Fold
Fold
Fold
Fold
Fold
The quick-disconnect freedom feature allows
you complete freedom to move around while
still wearing the headset. Just press the rubber-
ized tab on the connector and pull it out of the
pendant. To reconnect, snap the connector back
into the pendant.
The Quick-Disconnect
pendant provides a vol-
ume control for the
earphone, and a push
on/push off microphone
mute button. To adjust
the volume,
rotate the
volume control
knob to a comfortable listening level. To mute
the microphone, push the button in. Push again
to activate the microphone. The button must be
out to activate the microphone.
4Quick-disconnect
Freedom Feature 5Parrott Translator™
The VXI Parrott Translator™
provides universal
compatibility between your
headset and any soundcard.
Adding two AA batteries to
the Translator may improve
your headset performance. To
determine whether you need
batteries with your particular sound card,
press the button on the top of the Translator:
LED ON Batteries not needed
LED OFF Add two (2) AA batteries
To install or change the batteries:
1. Turn the Translator over so the bottom is facing you.
2. Push the cover in the direction of the embossed
arrow and ribs to slide the cover off.
3. Install two AA batteries. Slide the cover back on in
the opposite direction.
4. The batteries should be replaced once a year.
To test the batteries for replacement, press the button
on top of the Translator:
LED ON Batteries OK, check in three months
LED OFF Replace batteries
P/N 201030A ©2002 VXI CORPORATION
VXI LIMITED WARRANTY
1. If your VXI headset fails to work for any reason during the first two years from the
date of purchase as shown by the purchaser’s warranty registration, VXI will repair
or replace the headset, at its election, free of charge. Without warranty registration,
the warranty period begins on the date of manufacture. All products returned to
VXI after the two-year warranty period will be repaired as “out of warranty”
products, and purchaser will be billed for such repairs pursuant to the Out-of-
Warranty Repair provisions set forth below.
2. The obligations of VXI under this warranty shall be limited to repair or replace-
ment (at our option) of any part returned, freight pre-paid to VXI.
Returned products require a Return Authorization that may be requested from VXI
at 800-742-8588 or www.vxicorp.com.
3. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some jurisdictions do not permit the exclusion of implied warranties and the
foregoing exclusions may not apply to you.
4. In no event shall VXI be responsible for any other damages whatsoever including
direct, indirect, special, incidental, consequential or otherwise for breach of this or
any other warranty, express or implied.
5. Products returned to VXI for Warranty and Out-of-Warranty repairs, freight prepaid
and with proper Returned Authorizations, will be return shipped to the customer at
VXI’s expense within five (5) days of VXI’s receipt of payment.
OUT-OF-WARRANTY REPAIRS
VXI will repair out-of-warranty headsets or amplifiers for a charge of $22.50 each (or
such other charge as may be applicable as of the date of receipt by VXI). See return
details above. Out-of-warranty repairs are warranted to be free from defects in material
and workmanship for ninety (90) days.