PARSONVER FF1 User manual

1
User Manual
Model number: FF1
[e-mail]
EN (02-08) FR (09-16) DE (17-24)
ES (25-31) IT (32-39) JP (40-47)

02
Press and hold the side
power button to turn on the
watch
Note: ʹˢ˥Ё˥˦˧˨˦˘ʟˣ˟˘˔˦˘˖˛˔˥˚˘
˧˛˘˪˔˧˖˛˙ˢ˥ʨˠ˜ˡ˨˧˘˦ʟˢ˥˜˧ˠ˔ˬ
ˡˢ˧˕˘˧˨˥ˡ˘˗ˢˡʡʴˡ˗˜˧˧˔˞˘˦
˔˕ˢ˨˧ʥ˛ˢ˨˥˦˧ˢ˙˨˟˟ˬ˖˛˔˥˚˘˧˛˘
˪˔˧˖˛ʡ
Download App
˃ˢ˪˘˥ˢˡʠʶ˟˜˖˞˧ˢ˦˘˟˘˖˧˧˛˘
˟˔ˡ˚˨˔˚˘ʠˆ˖˔ˡ˧˛˘˄˅˖ˢ˗˘ˢ˙
˧˛˘˪˔˧˖˛ʠʷˢ˪ˡ˟ˢ˔˗Ϡʺ˟ˢ˥ˬʹ˜˧ϡ
app
ʹˢ˥˜˂ˆʭʴˣˣ˟˘ʴˣˣˆ˧ˢ˥˘
ʹˢ˥ʴˡ˗˥ˢ˜˗ʭʺˢˢ˚˟˘˃˟˔ˬˆ˧ˢ˥˘
1.Open the app, register and log in to your account.
2.Click the third small
icon “Device” at the
bottom of the page -
Click “Add a new device”
- Click in the upper
right corner - Scan the
QR code on the watch
(Settings - QR Code) - on
the App “FF1(ID-****) would like to pair with your phone.”
that pops up, select “Pair” - to achieve a successful con-
nection (Bluetooth Name: Parsonver FF1 )
Note:
1 )Turn on the Bluetooth on the mobile phone.
2)Reset the watch when no Bluetooth signal found.
ʺˢˢ˚˟˘
˃˟˔ˬˆ˧ˢ˥˘
Apple
App Store
Pair with Watch

03
1.Swipe Down to access quick settings.
Turn on/off call audio
Menu type Do not disturb
Basic Operation
3)Need to enter the app to pair the watch, cannot con-
nect to the Bluetooth in the phone settings.
4)When the Bluetooth is successfully connected, the
main interface pulls down and the sign in the upper
left corner is on, if there is no connection, the sign in
the upper left corner is a gray state.
5)Click the third small icon “Device” at the bottom of the
page - Click “More settings” - Click “Device language” to
set the language of the watch.
Note: Turn on call audio, in the upper left corner is on,
can answer and dial calls.
If in the upper left corner is a gray state,
1 )Click to turn off call audio, then turn it on again, and
check on.
ʥʜˁ˘˘˗˧ˢЁˡ˗Ϡˆ˘˧˧˜ˡ˚˦ϡˢˡ˧˛˘ˠˢ˕˜˟˘ˣ˛ˢˡ˘ʠʶ˟˜˖˞
“Bluetooth” - Find the Bluetooth name of the watch
“Parsonver FF1” - Click to connect
Mute mode
Raise to wake
Flashlight
Settings
Scan to connect to
the watch or down-
load the APP
Brightness
adjustment
Find phone
Note: Need to turn off the
media audio of the watch.

04
2.Swipe Up to enter message interface.
3.Swipe Right to enter recently used menu interface.
4.Swipe Left to enter daily exercise, sleep, heart rate,
blood oxygen, weather interface.
5.When the screen is on, press the side button to enter
menu interface.
6.Press and hold the main interface to select the watch
face.
7.Single click the side button can back to the previous
interface.
8.Press and hold the side button for about 3 seconds to
shut down.
Setting Mode
Watch face & Theme
Sound & vibration
Bright Raise to wake
Password
Choose “Dial” and “Theme”, and click the side button to
return to the previous interface.
Set the brightness and
screen time. Turn on/off “Raise to wake”.
Set “Password Switch”, when forgetting password,
please reset the watch to factory settings in the mobile
APP.
Set “Vibration” intensity, turn on “Media audio” and turn
on “Mute” mode.
Note: When turning on media audio, the watch can sync
all sound playback of mobile phone, such as voice as-
sistant and music playback.

05
Do not disturb QR Code
System Info
Set the start time and end
time of “Do not disturb”
mode.
Scan to connect to the
watch or download the
APP.
“Reboot”, “Power off”, “Re-
set” the watch. Check “Device name”, “Device version”, “Bluetooth
address”.
Press the side button to enter the menu to see
more functions when the screen is on
You can select “Contacts” or use “Dial Pad” to dial calls.
And you can check “Call Logs” on the watch.
Note: Click to hang up, click to adjust the volume,
click to turn on/off microphone. The other party can
hear you when the microphone is on, but cannot hear
you when the microphone is off.
Contact Person setting
Open the app - Click the third small icon “Device” at the
bottom - Click “Bluetooth Call” - Click “Sync Contacts” -
Click “Open” - on the App “GloryFit” Would Like to Access
Your Contacts that pops up and select “OK” to sync
contacts to the watch.
Call
Daily Exercise
Swipe down on the interface can check “Calories”, “Dis-
tance”, “Steps”(Step details and Weekly data).
Heart Rate

06
Training
Blood Oxygen
Sleep
Weather
Alarm Clock
Choose a training mode, swipe down on the interface to
view training time, heart rate, steps, calories, etc., swipe
right to continue/exit training mode, swipe left to enter
music control interface.
Monitor blood oxygen and view the 24-hour blood
ˢ˫ˬ˚˘ˡ˖˛˔ˡ˚˘˚˥˔ˣ˛ʟˢˣ˘ˡ˧˛˘˔ˣˣ˔ˡ˗Ёˡ˗˧˛˘˧˛˜˥˗
small icon “Device” at the bottom of the page - Click
“Blood oxygen setting” - Turn on “Automatic setting” and
set “Time period” and “Cycle”.
Monitor sleep data, slide down on the interface to view
deep sleep, light sleep, awake time, and REM(rapid eye
movement).
Check the weather, swipe down on the interface to view
future weather for next three days.
Click “+” to choose “Time” and “Repeat” , and swipe right
on the interface to save the alarm clock after setting.
Monitor heart rate, and slide down on the interface to
view heart rate change chart for a week
Note: To view the 24-hour real-time heart rate change
˚˥˔ˣ˛ʟˢˣ˘ˡ˧˛˘˔ˣˣ˔ˡ˗Ёˡ˗˧˛˘˧˛˜˥˗˦ˠ˔˟˟˜˖ˢˡϠʷ˘-
vice” at the bottom of the page - Click “Heart rate set-
tings” - Turn on “Automatic” and “Maximum heart rate
reminder”, when the heart rate is more than this value,
the device will vibrate to remind you.

07
Voice Assistant
SOS
Female Health
Shake to Take Picture
SMS
Click to wake up the voice assistant
Note: Need to turn on “Media audio” on Settings of the
watch.
Open the app - Click the third small icon “Device” at the
bottom - Click “SOS Contact” to set
˂ˣ˘ˡ˧˛˘˔ˣˣʠʶ˟˜˖˞˧˛˘˙ˢ˨˥˧˛˦ˠ˔˟˟˜˖ˢˡϠ˃˥ˢЁ˟˘ϡ˔˧˧˛˘
bottom - Click “Physiological cycle” to set reminders
Note:When registering an account, the gender must be
female.
˂ˣ˘ˡ˧˛˘˔ˣˣʠʶ˟˜˖˞˧˛˘˙ˢ˨˥˧˛˦ˠ˔˟˟˜˖ˢˡϠ˃˥ˢЁ˟˘ϡ˔˧˧˛˘
bottom - Click on the avatar to set personal information
Open the app - Click the third small icon “Device” at
the bottom - Click “More settings” - Click “Shake to take
picture” to enter photograph function
Open the app - Click the third small icon “Device” at the
˕ˢ˧˧ˢˠʠˇ˨˥ˡˢˡˠ˘˦˦˔˚˘ˡˢ˧˜Ё˖˔˧˜ˢˡ
Note: The watch cannot reply text messages.
Charge
ʹˢ˥˖˛˔˥˚˜ˡ˚ʟˣ˟˘˔˦˘ˣ˟˔˖˘˧˛˘˪˔˧˖˛Ђ˔˧ʟ˔ˡ˗ˠ˔˞˘
sure the metal holes on the back are aligned with the
metal tip of the charging head (charging contact spac-
ing: 4mm).

08
Replace the watchband
Precautions
Slide the switch of the watch-
band, and replace the same
˦ˣ˘˖˜Ё˖˔˧˜ˢˡʛ˪˔˧˖˛˕˔ˡ˗˪˜˗˧˛ʭ
22mm).
1. Please clean your watch regularly.
2. Please do not wear it too tight to avoid discomfort.
3. Please do not use for swimming. When getting wet, be
sure to dry the water on the watch before operating.
Note:
1) The rated voltage of the
charging head is 5V/0.5A.
2)Please do not use the vehicle
power supply to charge, to avoid
causing the charging cable
to age or burn out due to the
unstable voltage.
Specifications
Model Num-
ber FF1 Display 1.91inch TFT
Resolution 240*296px Bluetooth 5.2
Battery
Capacity 320mAh Working Time 5-7 days
Working
Tempera-
ture 0 - 45°C Storage
Tempera-
ture -10 - 50°C
Rated Volt-
age 3.8V Rated Cur- rent 190mA
Compatible
System Android 5.0 or above / iOS 10.0 or above

09
Appuyez et maintenez enfoncé le bouton
d’alimentation droit pour allumer la montre.
Remarque : lors de la
première utilisation, veuillez
charger la montre pendant
5 minutes, sinon elle ne
pourra pas être allumée, et il
faut environ 2 heures pour la
charger complètement.
Télécharger l’application
Allumer - Cliquez pour sélection-
ner la langue - Scannez le code
QR de la montre - Téléchargez
l’application “GloryFit’’
Pour iOS : App Store d’Apple
Pour Android : Google Play Store
1.Ouvrez l’application, s’inscrire et se connecter à votre
compte.
2.Cliquez sur la
troisième petite icône
en bas de la page“Moi”
- Cliquez sur “Ajouter
un nouvel appareil” -
Cliquez sur “ ’’ dans le
coin supérieur droit -
Scannez le code QR sur la montre (Paramètres - Code
QR)-”Êtes-vous d’accord pour jumeler avec le télé-
phone ?” apparaît sur la montre, sélectionnez “Jumeler”
- connexion réussie (Parsonver FF1)
Remarque:
1 ) Activez le Bluetooth sur le téléphone mobile.
2) Réinitialisez la montre lorsque aucun signal Bluetooth
Jumeler avec la Montre
ʺˢˢ˚˟˘
˃˟˔ˬˆ˧ˢ˥˘
Apple
App Store

10
1.Balayez vers le bas sur les interfaces pour accéder aux
paramètres rapides.
Activer / désactiver le son de l’appel
Sélection de menu Ne pas déranger
Fonctionnement de Base
n’est trouvé.
3) II faut entrer dans l’application pour jumeler la mon-
tre, il n’est pas possible de se connecter au Bluetooth
dans les paramètres du téléphone.
4) Lorsque le Bluetooth est connecté avec succès,
l’interface principale se déroule et le signe dans le coin
supérieur gauche est allumé, comme “ ’’, s’il n’y a pas
de connexion, le signe dans le coin supérieur gauche
est un état gris, comme “ ’’.
5) Cliquez sur la troisième petite icône “Appareil” en bas
de la page - Cliquez sur “Plus de paramètres” - Cliquez
˦˨˥Ϡʿ˔ˡ˚˨˘˗˘˟Ϟ˔ˣˣ˔˥˘˜˟ϡˣˢ˨˥˗Ёˡ˜˥˟˔˟˔ˡ˚˨˘˗˘˟˔
montre.
Remarque : lorsque l’audio de l’appel est activé et que le
coin supérieur gauche “ ” s’allume, ce qui permet de
réaliser la fonction de répondre et de passer des appels.
Si le coin supérieur gauche “ ” apparaît en grisé :
ǦCliquez pour désactiver l’audio de l’appel, puis réac-
˧˜˩˘˭ʠ˘˧˩˥˜Ё˘˥ϠϞϞ˘˦˧˔˟˟˨ˠʮ
ǧSur le téléphone portable, recherchez “Paramètres” -
cliquez sur “Bluetooth” - recherchez le nom Bluetooth de
˟˔ˠˢˡ˧˥˘Ϡ˃˔˥˦ˢˡ˩˘˥ʹʹʤϡʠ˜˟˩ˢ˨˦˦˨˙Ё˧˗˘˖˟˜ˤ˨˘˥ˣˢ˨˥
vous connecter.
Mode muet
Lever pour Activer
Trouvez le
téléphone
Réglage
de la luminosité
(vous devez désactiver l’audio multimédia de
la montre pour réaliser cette fonction)