Partial Hand Solutions Titan Flex Series User manual
User Guide
Titan Flex
Instructions for use
1. If using a silicone socket, apply a small amount
of water to dampen limb and push on prosthetic
socket to limb.
2. To flex finger, flex wrist to apply tension on the
lever and the finger will automatically flex. To
extend finger back, flex wrist to disengage lock
and manually extend back into position.
3. New users should start with a wearing schedule
and ease into a full day of use.
4. To remove prosthetic socket from limb, pull on
socket to remove or consult with your prosthetist
or therapist on proper technique.
5. Clean daily with fragrant free anti-bacterial
wipes. Consult with your Doctor and prosthetist on
preferred cleansing wipe.
6. Prior to patient receiving the device, LOCTITE
242 should be applied to all screws.
Shown connected to 3D
printed prosthetic socket
Partial Hand Sol utions
86 Ladyslipper Lane
Southington, CT USA 06489
+1 (860) 538-5532
EMERGO EUROPE
Prinsessegracht 20,
2514 AP
The Hague, Netherlands
988 INS UG PHS FLT 210602
MADE IN THE USA
©2021 Partial Hand Solutions, LLC. All rights reserved.
M-Fingers are distributed by:
800-728-7950 | 586-294-7950
27955 College Park Drive, Warren, MI 48088
Other Partial Hand Solutions Medical Equipment manuals
