PatioTree 10'x10' Calais hardtop gazebo User manual

Assembly Manual
10'x10' Calais hardtop gazebo

300cm/9.8'
3. Wearing protective gloves
is recommended.
4.You may need a safety hat.
6. Please use a Phillips
screwdriver.
8.For ease of construction, you
may need to use a drill.
2.You will need one or more
stepladders.
5.Use the hex keys in the box.
2+
1.Two or more people are required
for assembly.
7.Do not fully tighten screws
prior to complete assembly.
10x10' ANCHOR BLUEPRINT
300cm/9.8'

x
y
z
PRT_CSYS_DEF
DESCRIPTION
PARTS&HARDWARE LIST
Pole
Beam
Beam
Roof Bar
Corner Roof Bar
Corner Solidifying Bar
Corner Solidifying Bar
Finishing Bar
Finishing Bar
Solidifying Bar
Corner Cover
Joint Cover
Outside Roof Connector
Inside Roof Connector
Base
Finishing End
Finishing End
Iron Angle
1

+1
+3
+1
DESCRIPTION
Iron Angle
Spacer
Panels
Panels
Panels
Panels
Panels
Panels
Union Bar
Hook
Metal Bracket
Screws
Screws
Metal Bracket
Screws
2

+3
+4
+3
+1
DESCRIPTION
Screws
Screws
Screws
Screws
Wrench
Allen Key
Mosquito Sidewall
Solide Sidewall
Screw Driver
3

P
Q
Q
4PCS 4PCS
4PCS 4PCS
32
B
B1B1 B
Q
Q
Part P with screws V as shown in diagram.
4
STEP2
STEP
Ax4
Vx12
Set up poles (PartA) with stand paletes (Part L) using
screws V as shown in diagram.
B1
B
Put 4 Hooks to each slot of sidewall track (Part B and B1).
Connect Part B and Part B1 into one beam using union bar
Q
Qx64

Use screws X to connect poles and beams together as
shown in diagram.
FF1
(Part F and F1) using screws Y as
STEP
STEP
x32
5
Affix the frame with corner solidifying bars
shown in diagram.

6
1
J1x4
J2x4
Yx24
STEP
STEP
Finish connecting beams using
screws Y as shown in diagram.
Affix middle beams using joint cover (Part J2)
and screws Y as shown in diagram.
corner covers (Part J1)and
J2
J2
J2
J2
J1
J1
J1
J1
Connect the inside roof connector (Part K1) with the corner
roof bar (Part E) using screws V as shown in diagram.

7
7
Attach corner roof bar (Part E) to main frame using screws V
as shown in diagram.
8
Attach roof bar (Part D) to main
in diagram.
frame using screws V as shown
Attach roof bar (Part D) to inside roof
connector using screws V as shown in
diagram.

K
K1
8
1
2
21
1
9
Connect outside roof connector (Part K) to inside roof connector
(Part K1) using screws U as shown in diagram.
10
Affix solidifying bar (Part H) to roof bar (Part D) and corner
roof bar (Part E) using iron angle (M3 and M4) and
screws V as shown in diagram.
D
M3
E

9
11
Overall roof assembly:
Connect roof as above
D1
R/D1
R
R
Cover metal brackets (Part D1 and R) to roof panels as
shown in diagram.
O1
O2
O3
O4
O5
O6O1
O2
O3
O4
O5
O6

10
STEP12
d
Affix roof panels using screws and spacer (Part M5) as shown in
diagram.
X1

3
11
E
Affix finishing bars (Part G1&G2) by (Part M1&M2) using
screws V to roof bar and corner roof bar as shown in diagram.
D

4
12
Hang up sidewall (Part Z1&Z2) as shown in diagram.

A
A
13
3.)Hanging the hook of
curtain on the tube A.
Step 15: There are three ways to secrue your netting and curtains to the legs
using the include 4 ties.
In the end check all screws are fixed tightly before using.
1.)Securing justthe
netting
2.)Securing just the
netting and curtains.

CONTACT US
Toll free: 1-818-963-1558 Mon-Fri 10am - 6pm PST
Email: [email protected]om
If we missed you call, please leave a detailed message including
your name and phone number. We will call back as soon as possible.
SOCIAL MEDIA
Follow us on our Social Media by uploading a picture of our
brands furnishings in your home, you will have chance to get
our newest product free.
Facebook.com/Peak-Home-Furnishings-Inc-103544141243786/
Instagram.com/peakhomefurnishings
Twiter.com/peakhomefurnis1
© Copyright 2016 - 2021, peakhome furnishings INC. | All Rigts Reserved.
PEAKHOME FURNISHINGS INC.
970 Roosevelt #202, Irvine, CA 92620
www.peakhomefurnishings.com