Patton electronics CopperLink 2172R User manual

The Patton Model 2172R utilizes pre-
existing twisted pair infrastructure
enabling twisted pair previously used
for legacy systems such as TTL, RS232
and 422/485 to be used for extending or
connect Ethernet devices together. With a
pair of 2172R’s or combined with a 2172,
twisted pair can carry an extraordinary
bandwidth of 100 Mbps full-duplex (50
Mbps up and downstream). Reusing the
already existing infrastructure for Ethernet
Networking eliminates the cost of purchas-
ing expensive fiber and Cat5E or greater
cabling. Most importantly, it completely
eliminates the hassle and sometimes over-
whelming expense and downtime of the
cable installations.
The 2172R was designed to operate in a
rugged environment, with temperature
ranges from -10 to 70°C, and the option for
conformal coating protecting the device
from condensing humidity, and operates at -
10 to 80°C. The 2172R’s aluminum case
design allows for users to conveniently
mount them on a wall or DIN rail (with
optional DIN rail kit).
Visit www.patton.com for more information.
Patton’s 2172R extends Ethernet connections at distances up to 5,500 feet over already existing serial infrastruc-
ture cabling
CopperLink™Ruggedized
50-Mbps Ethernet Extender
Model 2172R
Extenders
Operates Over Twisted Pair
Reduces the cost and hassles of new installa-
tions. Utilizes installed voice-grade twisted pairs
to eliminate the expense of fiber or Cat5e cabling.
Plug and Play
No configuration or cable hassles during instal-
lation with auto-sensing 10/100, full or half
duplex, and auto MDI-X.
Full-duplex data-line rate of 100 Mbps
Provides near fiber performance for bandwidth
intensive applications
Ruggedized
Operating temperature of -10 to 70°C or
-10 to 80°C for 2172/CC
Flexible installation
Wall mount ready and optional DIN rail kit
Auto-sensing 10/100Base-
TX,full or half-duplex, and
auto MDI-X switch
RJ-45 or 2-position
terminal block
CopperLink port
100 Mbps full duplex
over one ordinary-
grade twisted-pair
Front panel indicators show opera-
tional status at a glance
Six asymmetric/sym-
metrical data rates
available via DIP switch
Local/remote
switch
CopperLink™Ethernet Extenders
1 mile
1 mile
1.1 miles
0.75 mile
5.7 miles
5.7 miles
5.7 miles
5 miles
50 Mbps
50 Mbps
16.6 Mbps
12 Mbps
4.6 Mbps
4.6 Mbps
2.3 Mbps
144 kbps
Max.
Distance
Max.
Speed
800 feet
800 feet
3,125 feet
4,000 feet
2.0 miles
2.0 miles
3.1 miles
5 miles
Distance at
Max. Speed
Model 2172R
Model 2172
Model 2168
Model 2158
Model 2157R
Model 2157
Model 2156
Model 2155
CopperLink™
Model
Take your network connections faster and farther over existing
voice-grade wire with Patton CopperLink™Ethernet Extenders!

07M2172R-DS4
Patton is a registered trademark of Patton
Electronics Company in the United States
and other countries.
Workgroup Ethernet Extension Application
Specifications*
CopperLink line interface: RJ-45 (pin 4
= ring; pin5=tip);twopositiontermi-
nal block
Ethernet interface: 8-position shielded
RJ-45. Auto-sensing 10/100Base-T with
half or full-duplex operation. DIP switch
capable of disabling 100-Mbps full-
duplex for equipment that does not
support 802.3X (Pause Packets)
Protocol: Transparent to high layer pro-
tocol. Supports 802.1Q VLAN tagging
Modulation: Quadrature Amplitude
Modulation (QAM) 4-band
Duplexing Method: FDD (Frequency
Division Duplexing)
Frequency Range: CopperLink:
0–12 MHz
Transmission: CopperLink line rate: Up
to 100 Mbps full duplex
Surge suppression: CopperLink line tran-
sient peak surge maximum: 200A
(8/20µs)
Front Panel Indicators: Power, Link,
Ethernet
Power Supply: External AC and DC
options: 120VAC, and universal input
(UI)—100–240 VAC, or optional -48
VDC, -24 VDC, or -12 VDC
Compliance: FCC Part 15A, CE Mark,
EMC Directive 89/336/EEC, Low-Voltage
Directive 73/23/EEC
Temperature
Standard: -10 to 70°C
Conformal Coated: -10 to 80°C
Humidity
Standard: Up to 90% non-condensing
Conformal Coated: 85% condensing
humidity from -10 to 35°C
Dimensions: 1.12H x 5.57W x 3.57D in.
(2.84H x 14.15W x 9.07D cm) with
brackets
1.12H x 4.44W x 3.57D in. (2.84H x
11.28W x 9.07D cm) without brackets
Weight: 0.4 lbs (0.18 kg) without
power supply
* Specifications subject to change without notice.
The Model 2172R multi-rate Ethernet Extenders are ideal for delivering
Ethernet links to remote buildings that are beyond the 328-foot (100-meter)
distance limit of Ethernet. The 100 Mbps throughput eliminates bandwidth
concerns previously experienced with other copper wired transmission tech-
nologies. By utilizing existing voice grade copper pairs the expense and has-
sle of installing low capacitance or fiber cable is no longer required.
Extend 10/100Base-TX Ethernet to reach
beyond its natural limitations
Up to 800 feet (243 meters) at 100 Mbps full
duplex over voice-grade twisted-pair
Pick &
place machine
Office
Model 2172
Model 2172R
Asymmetrical Line Rates
Line Rates (AWG 24/0.5 mm)
Distance in ft (m)
6,000 (1,830)
4,000 (1,200)
2,000 (610)
1
1
2
4
16
50
Upstream in Mbps Downstream in Mbps
Symmetrical Line Rates
Line Rates (AWG 24/0.5 mm)
Distance in ft (m)
10
25
50
10
25
50
Upstream in Mbps Downstream in Mbps
4,000 (1,200)
2,000 (610)
800 (245)
EnviroNET™models
also available
Patton-Inalp Networks AG
Meriedweg 7
CH-3172 Niederwangen
Switzerland
Phone [phone]
Fax [phone]
E-mail [email protected]
Web www.inalp.com
Patton Electronics Co.
7622 Rickenbacker Drive
Gaithersburg, Maryland 20879
USA
Phone [phone]
Fax [phone]
E-mail [email protected]
Web www.patton.com
PE-Inalp Networks Private Ltd
Old No. 14 and New No.6,
Brahadambal Road,
Nungambakkam High Road
Chennai: 600 034, India
Phone [phone]
Fax [phone]
Email [email protected]
Web www.patton.co.in
An Associate of
Electronics Co., USA