PCS Nasco Simulaids Alex User manual

No tablet? No problem!
You can use any wifi-enabled device to setup ALEX: your laptop, tablet,
or even smartphone as long as you can choose between different wifi
networks.
Plug in the battery charger to a wall outlet and ALEX,
then power on your simulator.
Open your wifi network settings and connect your laptop (or
device) to ALEX’s wifi network.
Open Google Chrome or Firefox and visit the setup.pcs.ai
website and follow the onscreen instructions.
As simple as 1-2-3:
DC power port and
switch are on the left
side of the torso.
This page presents simulator-specific
content while connected to its wifi.
~ Network
name
Wifi
password
1
2
3
APPLY LABEL HERE
Getting
Started With
Your Simulator
Visit help.pcs.ai for more detailed
instructions and further assistance. HEALTHCARE
HC18000028INM24.indd 1 9/19/18 10:47 AM

... the tablet by pressing
the power button for a few
seconds. You may want to
connect the USB charger of
the tablet to start charging
its battery.
TURN ON
2
… to begin the setup process. Tap the
Firefox icon to start. The displayed
pages will guide you through
connecting ALEX to the internet and
activating your simulator.
USE THE
TABLET
3
Start Firefox to use
Firefox
UNPACK
1
... and the accessories: the
simulator’s external power
supply, power cord, the
included wifi tablet and its
USB charger (as illustrated
on previous page).
Start Firefox to use
HC18000028INM24.indd 2 9/19/18 10:47 AM

... the tablet by pressing
the power button for a few
seconds. You may want to
connect the USB charger of
the tablet to start charging
its battery.
TURN ON
2
… to begin the setup process. Tap the
Firefox icon to start. The displayed
pages will guide you through
connecting ALEX to the internet and
activating your simulator.
USE THE
TABLET
3
Start Firefox to use
Firefox
UNPACK
1
... and the accessories: the
simulator’s external power
supply, power cord, the
included wifi tablet and its
USB charger (as illustrated
on previous page).
Start Firefox to use
HC18000028INM24.indd 2 9/19/18 10:47 AM

No tablet? No problem!
You can use any wifi-enabled device to setup ALEX: your laptop, tablet,
or even smartphone as long as you can choose between different wifi
networks.
Plug in the battery charger to a wall outlet and ALEX,
then power on your simulator.
Open your wifi network settings and connect your laptop (or
device) to ALEX’s wifi network.
Open Google Chrome or Firefox and visit the setup.pcs.ai
website and follow the onscreen instructions.
As simple as 1-2-3:
DC power port and
switch are on the left
side of the torso.
This page presents simulator-specific
content while connected to its wifi.
~ Network
name
Wifi
password
1
2
3
APPLY LABEL HERE
Getting
Started With
Your Simulator
Visit help.pcs.ai for more detailed
instructions and further assistance. HEALTHCARE
HC18000028INM24.indd 1 9/19/18 10:47 AM