Peak Season 10010040a User manual

Thank you for purchasing this quality product. Be sure to check all packing
materials carefully for small parts that may have come loose inside the carton
during shipment. Please read all instructions carefully before starting the
assembly process.
Step I. On a flat, soft, non-abrasive surface, connect the table legs (B) to the table base
(A) by using: washer (C), spring lock washer (D), 35MM screw (F), hex wrench (I). Then
connect the table leg angle support by using: washer (C), spring lock washer (D), 15
MM screw (E), hex wrench (I). Do NOT tighten the screws until all have been inserted.
Once all screws have been inserted, securely tighten each of the screws using the hex
wrench (I). See Figure 1.
Figure 1
Step II. Attach the support frame (H) to the table legs (B) by using washer (C), spring
lock washer (D), 40MM screw (G), hex wrench (I). Do NOT tighten the screws until all
have been inserted. Once all screws have been inserted, securely tighten each of the
screws using the hex wrench (I). See Figure 2.
Page 1
Assembly Instructions Counter Table Base for 40” Round Stone Tops Model # 10010040a
CAUTION: Some items and/or the components are cumbersome and heavy.
Therefore, the assistance of one or more people is recommended in order to
prevent personal injury and insure that the item and/or its components are
not damaged during the assembly process. Perform all assembly steps on a
flat, soft, non-abrasive surface. Do not over-tighten the screws or bolts.

Step III. Place the table top (J) upside down on a flat, soft, non-abrasive
surface. Remove and discard the 4 screws that are inserted into the table
top. Connect the support frame (H) to the table top (J) by using: spring lock
washer (D), 50MM screw (K), hex wrench (I). Do NOT tighten the screws until
all have been inserted. Once all screws have been inserted, securely tighten
each of the screws using the hex wrench (I) and then insert the screw covers
(L). At least 2 persons should very carefully lift the table in unison to turn it
right side up. See Figure 3.
Assembly Instructions Counter Table Base for 40” Round Stone Tops Model # 10010040a
Page 2
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
For questions, missing parts or defectives,
please contact Peak Season:
1-866-563-1732
[e-mail]
Hours of Operation: 8:00 a.m. to 5:00 p.m. CST
Figure 2
Figure 3