
PECO WavePRO™ WIRELESS SYSTEM
Conventional & heat pump applications
BLUE backlight LCD display
Program override
Temporary or permanent holds
Heat / Cool / Off / Auto changeover
system settings
Manual setback for vacations
Service indicator
Supports remote temperature sensor
Programmable (intermittent) fan
Supports multiple auxiliary heat types
A wireless thermostat transmitter & receiver system designed for use
with conventional (gas, oil, electric) or heat-pump systems.
- Receiver
K2500
System
Optimum performance
PECO WavePRO™ WIRELESS SYSTEM
Innova on & experience you can count on
2 Heat / 2 Cool stages conventional,
3 Heat / 2 Cool stages heat pump,
supporting auxiliary heat stages & the latest
compressor technology.
7-Day individual, 5-1-1, 5-2,
7-day identical programming modes,
for ultimate programming & operating fl exibility.
24 VAC, battery or both,
giving standalone use when power is lost
or not present.
Frequency Hopping Spread Spectrum,
allowing optimal performance by avoiding
interference from other wireless devices.
ISM frequency range operation (902-928 MHz),
a frequency reserved for control applications,
which is above radio/TV & below WiFi.
Pre-occupancy purge,
allowing fresh air circulation before occupancy.
T2500-001
Thermostat
2 Heat / 2 Cool Stages
Conventional
3 Heat / 2 Cool Stages
Heat Pump
R2500-001
Receiver
Gas
Electric
Oil Heat Pump
Wireless