
22021-01-07 #:150-9261-2 (2021-01-13)
ENG - Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. Before installing make sure the supporting surface will support the combined load of
the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur
and product may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting
prevent tipping. This product is intended for indoor use only. Use of this product outdoors could lead to product
overloading electrical outlets or extension cords. Always disconnect the power cord from the power outlet when
product. Keep product away from direct sunlight or any source of heat. For support please call 1-800-865-2112.
WARNING
Symbols
ENG
WARNING
ENG
x3
Screws must get at least three
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
3/4"
(19mm)
1
2
ENG To properly tighten screws: Tighten until screw
turn. Do not overtighten screws.
+1/2
4
3