peerless-AV PTS510I User manual

12015-06-18 #:126-9067-1
PTS510I, PTS510I-S,
PTS510I-W
ENG

22015-06-18 #:126-9067-1
5mm
(3/16")
ENG - This product is designed to be installed on wood stud, solid concrete or cinder block walls. Hardware is
included for wood stud, solid concrete and cinder block installation. Before installing make sure the supporting
surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do
not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity.
Always use an assistant or mechanical lifting equipment to safely lift and position equipment. Be careful not to
pinch fingers when operating the mount. For support please call customer care at 1-800-865-2112.
WARNING
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at least
three full turns and fit snug.
ENG
Tools Needed for Assembly.
ENG
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
+1/2
4
3
5/16"
(8mm)
3/8"
(10mm)
Do not overtighten screws.
ENG

32015-06-18 #:126-9067-1
E
Parts List PTS510I
Part # PTS510I-W Part # PTS510I-S Part #Description Qty
Abase weldment 1 146-T1306 146-2306 146-4306
Btube weldmwnt 1 146-T1309 146-2309 146-4309
Crivet assembly 1 146-T1318 146-2318 146-4318
Dfront cover assembly 1 146-T1316 146-2316 146-4316
Eadjustment bracket 2 146-T1317 146-2317 146-4317
F4mm allen wrench 1 560-9646 560-9646 560-9646
Gadhesive rubber feet 1 570-1036 570-1036 570-1036
Hwood screw 1 5S1-015-C03 5S1-015-C04 5S1-015-C04
Iconcrete anchor 1 590-0320 590-0320 590-0320
J3/8 hex plastic head cover, blk 1 560-1029 560-2029 560-2029
Kacorn nut 4 530-1049 530-1049 530-1049
LM4 x 6mm socket pin screw 4 520-1059 520-1059 520-1059
Mspacer 4 540-1032 540-1032 540-1032
Nadhesive foam 8 570-0045 570-0045 570-0045
OM5 x .8 x 10mm socket pin screw 4 520-1164 520-2031 520-2031
Parts (Before beginning, make sure you have all parts shown below).
ENG
CD
B
A

42015-06-18 #:126-9067-1
OL K
IH J
G
MN
F

52015-06-18 #:126-9067-1
1b-1
1a-1
Free standing
ENG Secured
ENG
1a-1
G(4)
2
A(1)

62015-06-18 #:126-9067-1
1b-1
1b-3
1b-2
J(1) A(1)
I(1)
I(1)
5/16"
(8mm)
3/8"
(10mm)
Drill mounting holes into supporting surface
(2.5" (64mm) minimum depth required).
Insert anchor flush to concrete.
Install using concrete anchors and wood
screws provided.
ENG
ENG
ENG
2.5"
(64mm)
5/16"
(8mm)
J(1)

72015-06-18 #:126-9067-1
1b-4
2
O(2)
B(1)
J(1)
F

82015-06-18 #:126-9067-1
3
4
N(2)
E(1)
C(1)
L(4)
Note: Repeat
Note: Do not tighten screws
ENG
ENG
E(2)
F
x2

92015-06-18 #:126-9067-1
6
5C(1)
IPAD
SOLD SEPARATELY
CUT OUT
ALIGN CENTER OF
IPAD TO CUT OUT
Note: Adjust and tighten
ENG
F

10 2015-06-18 #:126-9067-1
7
D(1)
O(2)
F