peerless-AV MSA-101 Guide

ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 4
MSA-101 MSA-101S
DESCRIPTION QTY. PART# PART#
Acenter speaker mount 1 087-1041 087-4041
Binterface bracket 1 087-1047 087-4047
Cspeaker attachment bracket 2 087-1042 087-4042
D M5 x 6 mm socket pin serrated 4 510-1114 510-1114
washer head screw
E M5 x 10mm socket pin screw 1 520-1063 520-1063
Fspacer 1 540-1032 540-1032
G1/4 x 1.5" hex bolt 2 520-1096 520-1096
H 1/4" flat washer 2 540-9440 540-9440
I3/8 x 1" bolt 2 520-1242 520-1242
Jflat washer 2 540-9407 540-9407
Ktear drop locking tab 1 200-1871 200-1871
L4 mm security allen wrench 1 560-9646 560-9646
Note: some parts may not appear exactly as illustrated.
PartsList
Installation and Assembly - Multi-Channel Speaker Mount
for Boston Acoustics P400 or Polk Audio Center Channel
Models: MSA-101,
MSA-101S
IMPORTANT! Read entire instruction sheet before you start installation and assembly. MAXIMUMLOADCAPACITY:
25.00 lb (11.4 kg)
L
J
C
B
D
H
F
E
I
G
K
A

ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
2 of 4
Slide speaker attachment brackets (C) onto center speaker (A) mount as shown below.
AC
C
1
B
Note: some parts may not
appear exactly as illustrated.
PLASMA ADAPTER
2-1 Loosen screws on plasma adapter. Then place interface bracket (B) between plasma adapter and mount. Tighen
screws on plasma adapter securly. Refer to adapter plate instructions for installation of screen.
Skip to step 3.
Installation with adapter plate
MOUNT

ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
3 of 4
Note: some parts may not
appear exactly as illustrated.
Installation directly to screen
2-2 Place interface bracket (B) between screen and mount. Attach interface bracket (B) to mount and screen using fasten-
ers provided with mount. Refer to mount instructions for installation of screen. Tighten all screws securly.
Note: For installation of tear drop locking tab (N) reference SP-850 instruction sheet.
B
SCREEN
MOUNT
Note: Roll can be adjusted 1° clockwise
or counterclockwise. To adjust roll,
loosen screen fasteners slightly, leaving
them snug. Level screen, then tighten
screen fasteners.
Attach interface bracket (B) onto center speaker mount (A) using four M5 x 6 mm socket pin serrated washer head
screws (D). Adjust form brackets to best fit your screen size. Tighten screws using 4 mm security allen wrench (L).
Note: For best results use holes closest to the edge of the form brackets as shown below.
Note:Adapter plate, screen, and mount not shown for clarity.
B
A
D
3

ISSUED: 12-19-05 SHEET #: 087-9013-4 05-10-06
Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.
4 of 4
J
Attach speaker to center speaker bracket (A) using two screws (I or G) and two washers (J). Adjust the speaker
attachment brackets (C) to desired location and tighten screws.
Note: For Boston Acoustics speakers use two 3/8 x 1" bolt (I) for Polk Audio use two 1/4 x 1.5" hex bolt (G).
4
AC
I or G
©2006PeerlessIndustries,Inc. Allrightsreserved.
Peerless isaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
Note: Interface bracket not
shown for clarity.