Pegasus PHDVR User manual

INSTALLATION/OPERATION
DIGITAL VIDEO RECORDER
H.264 ( 4/8/16 CHANNEL)

2
H.264 DVR - Installation/ O
p
eration Manual
WARNING: To prevent a risk of fire of electric shock, do not expose this product to rain or moisture.
• This installation should be made by a qualified service person and should conform to all local codes.
• This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Copyright This manual is the intellectual property of Manufacturer and is
protected by copyright. All rights are reserved. No part of this
document may be reproduced or transmitted for any purpose,
by whatever means, be they electronic or mechanical, without
the express written permission of Manufacturer.
Edition : Dec.2009
Copyright 200ⓒ9 Manufacturer
Note This Manual was compiled with the greatest of care and all information
double checked. At the time of printing the description was complete and
correct. Because of the further development of products, the content of the
manual might change without prior notice. Manufacturer will not be liable
for damage which is directly or indirectly due to errors, incompleteness, or
discrepancies the manual and the product described.
Trade marks All names used in this manual for hardware and software are very probably
registered trade marks and must be treated as such.

3
H.264 DVR - Installation/ O
p
eration Manual
Contents
FOR THE SAFETY OF CUSTOMERS…………………...………………………….…………………………4
DESCRIPTION OF PARTS AND FUNCTION…………...…………………………………………………....7
COMPOSITION OF UNIT…………………………………...……………………………………………………7
FEATURES …………………………………………………..……………………………….……………….....8
DESCRIPTION OF PARTS AND FUNCTION ………………..…………….…………..……..……………….. 9
Front Panel……………………………………………………..………………………………..…………........9
Rear Panel………………………………………………………..………………………………………… …11
Connection diagram………………………………………………………………………………………….11
IR Remote Controller………………………………………………………………………………………….12
OSD Description.................................................................................................................................................13
MENU………………………………………………………………...………………………………………......14
MENU TREE…………………………………………………………..…………………………………………14
Main Menu.…………………………………………………………..………………………………………..16
Display………………………………………………………………..………………………………………..16
Recording……………………………………………………………..………………………………………..19
System ….……………………………………………………………..……………………………………….23
Network …………………………………………………………………..…………….……………………..30
Event ….……………………………….…………………………..…………………………….….32
Search………………………………………….……………………………………………………….………33
Search……………………………….…………………………………………………….………33
BackUp……….……………………………………………………………………………….………36
Log……….……….……………………….……………………………………………………….………38
Client Program…………………………………………………………………………………........................39
Q & A……………….………………………………………………………………………………….…………64
Appendix 1…...……………………………………………………………………….........…………………….66
Appendix 2...………………………………………………………………………….........…………………….69
Appendix 3…...........………………………………………………………………….........…………………….73
Appendix 4…...........………………………………………………………………….........…………………….76
Appendix 5…...........………………………………………………………………….........…………………….78
Appendix 6 (Specification) ………….…………………………………………….........…………………….85
Product Warranty……………………………………………………………………………………………….86

4
H.264 DVR - Installation/ O
p
eration Manual
1. FOR THE SAFETY OF CUSTOMERS
Caution before use
Please read this manual for proper use.
The caution described in this manual contains very important information for the safe use, so, please
follow the instruction.
Please keep it whether you could reach after read.
For the safety and proper use, it marked various symbol. So, please read it to prevent your physical or
financial loss.
Tips for installation
Please avoid water which could be the reason of firing or electric shock.
Clean the plug and socket.
Please keep the socket and plug clean so that you could avoid the fire. The plug should be tightly
connected to the wall socket.
Do not put the unit on an unstable place.
Do not put the unit on an unstable place like rugged table or slope place.
Be careful for the installation position.
Don’t put the device in humid, direct sunlight, dusty, hot, greasy condition.

5
H.264 DVR - Installation/ O
p
eration Manual
Caution for proper usage
During use
In following cases, please turn off the power and remove the plug then, please contact technical
support.
If you use it continually, it could be a reason for a fire or electric shock.
If smoke comes out of the device or when you smell something burning.
If a alien substance is split into the device.
If the device is dropped or the case is damaged.
If the power cable has been damaged ( ex. slipped etc.)
No picture being displayed.
Don’t open the case or modify.
There is the high voltage sector inside the unit so, if you open the case
or modify it, it could cause the fire or electric shock.
Don’t put a cup containing water or juice and small material on the device
If you spilt water or alien substance into the device, it could cause the fire or electric shock.
Don’t put any alien substance.
Don’t put alien substance through the fan.
Don’t touch when lightning .
When the lightning starts, don’t touch the plug or cable. It could cause the electric shock.
Don’t touch the power plug with wet hand.
Don’t unplug with wet hands. It could cause a electric shock.
Don’t pull out the power cable.

6
H.264 DVR - Installation/ O
p
eration Manual
Use the designated HDD
Please use the designated HDD. Otherwise, recording may be operated improperly.
Maker HDD Capacity
Western Digital
Seagate
80,160,250,320,500,640,750GB, 1 and 2TB (excl. 4CH) is supported.
HDD is available up to 1pcs for 4CH(Max 1TB), 8/16CH.(Max 2TB)
Don’t pull out the cable when plug out from the wall socket.
It could damage the cable and cause the fire.
Please pull out holding the plug.
When you move, please remove plug.
If you move the device while the plug is in the socket, it could cause a fire by damaging the cable.
Don’t block the ventilation window.
When the ventilation window is blocked, it could cause the fire by the generation of Internal heat.
Don’t put a heavy item on the device.
When it looses the balance and falls down, the customer could be hurt.
Keep the plug and socket clean.
Regarding the cleaning, please contact your Installer.
If there is too much dust inside the device, it could cause the fire or internal short.
Clean the plug and socket.
Please keep the socket and plug clean to avoid fire. The plug should be tightly connected to the wall
socket.
Caution when you don’t use the device for a long time.
If you don’t use the device for a while, please switch off and unplug.

7
H.264 DVR - Installation/ O
p
eration Manual
2
2. . D DE ES SC CR RI IP PT TI IO ON N O OF F P PA AR RT TS S A AN ND D F FU UN NC CT TI IO ON N
2-1 COMPOSITION OF UNIT
Standard
When you have received a product “without HDD” , the accessories
1) Bracket & Cable for HDD installing 2) fixing screws will be supplied.
※Accessories are subject to change without notice.
Power Cable
CD(Client Software,
User Manual_Softcopy)
Remote Controller
Battery
Quick Guide

8
H.264 DVR - Installation/ O
p
eration Manual
2-2 FEATURES
●Convenience
- User-friendly GUI( Graphic User Interface)
- Easy-to-use menu composition
- Easy-to-use recorded data search (Time, Date, Motion, Alarm)
- Easy-to use menu with USB Mouse.
●Stability
- Auto restart after power interruption
-DB structure offers data stabilization and best storage utilization
●Expandability
-Various remote multi DVR’s can be controlled by Web browser (PC Client System)
●Technology
-Embedded LINUX OS
-Totally maximum recording rate 120/100 fps
-High-resolution & high-quality H.264 algorithm
-Using Water marking & scrambling technologies,
-Strong protection recorded data
-H.264 : 1 ~ 2 Kbytes per image with resolution 360x240
●Functionality
- Privacy Masking Set
- Variable recording function (normal, alarm, motion, schedule, Duration)
- Full channel real-time monitoring
- Live monitoring, recording, playback, backup, remote access at the same time
- Multi channel playback
- Variable events notification to e-mail, buzzer or PC Client system

9
H.264 DVR - Installation/ O
p
eration Manual
2-3 DESCRIPTION OF PARTS AND FUNCTIONS
2-3-1 Rear Panel
(1) VIDEO IN (BNC)
- 4, 8, 16 Camera input (1.0v p-p, 75Ω)
(2) VIDEO OUT
- Composite / VGA / SPOT
(3) AUDIO IN / OUTPUT
- 1 Audio Input / Output
(5) RS232
- 1 Serial Communication
(6) Network Port (RJ-45)
-Available to monitor live screen and recorded data on the HDD through Internet or LAN
(7) MOUSE
- Front : Port for both Thumbs drive and USB Mouse
- Rear : This is for the PS2 mouse and may not support some USB mouse.
In this case, please insert the USB mouse into the front USB port.

10
H.264 DVR - Installation/ O
p
eration Manual
(8) ALARM / SENSOR
- ALARM / 1 SENSOR INPUT, OUTPUT PORT
(9) RS485_CAMERA / KEYBOARD CONTROLER
- 1 Serial Communication for Pan / Tilt Camera
- 1 Serial Communication for P/T/Z Control Keyboard
(10) DC POWER
- AC 110~240 V (Free Voltage) / DC 12V 3A OVER
ATTENTION
When the video format is changed, the system should be re-booted
The video format should be selected before booting
Default Passwords
“00000000” i.e. 8x Zero’s. Password is required if you need to
down-power or stop recording, prompt will be displayed asking
for password.
Web Client
User ID “admin” (not case sensitive).
Admin ID cannot be changed this is full
administrator ID.
Password “00000000” i.e. 8x Zero’s

11
H.264 DVR - Installation/ O
p
eration Manual
2-3-3 System Connection Diagram

12
H.264 DVR - Installation/ O
p
eration Manual
2-3-4. IR Remote Controller
1.Power : Power ON/OFF
2. Rec : Start & Stop Recording
3.ⓞ~⑨:Key for figure and character
4. P/T/Z: Entering PTZ menu directly
5. OSD : Operating OSD ON/OFF
6. SEQ : Hot key for Spot(120/100fps)
Key for SEQ operation(4808/400fps)
7. LOG : Direct access Log list
8. INFO: Direct access system Info.
9. ID : Reserved.
10. MUTE : Audio Mute
11. AUDIO : Available audio switching when
user select this key
12. MENU : Entering system menu
13. SEARCH : Entering search
14. ARROW & SPLIT : Key moving left,
right, up and down. Also, Screen split display
shows
15. VOL”+,-“ : Up, down volume
16. CH “+,-“ : Up, down channel(s)
17. ▶(▶) : Play(or fast forward)
18. ◀(◀) : Reverse play
19 II :Pause
20. █: Stopping playback
21. Cam : Changing PTZ icon
22. P/T : Pan &Tilt
23. Z/F : Zoom/ & Focus
24. DIS : Channel Division

13
H.264 DVR - Installation/ O
p
eration Manual
2-3-5. OSD Description
:
Status Bar is shown HDD capacity, Event, Network connection, Time, etc
using by icons.
-HDD Capacity : 135GB is used out of 149GB
-Event : Power Fail, Video loss, etc will be shown
when it is occurred.
-Network connection : It is shown that admin or user is connected.
-Date/Time
*Others :
-Backup -Mute -USB Stick: - Mouse

14
H.264 DVR - Installation/ O
p
eration Manual
3
3. . M ME EN NU U
3-1.Menutree
Dis
p
la
y
Recordin
g
S
y
stem
Spot Setting
OSD Setting
Camera Covert
Camera Name
Post Duration
Qualit
y
Global
Pre Resolution
Basic
Disk Format
Password Change
Client Account
Program Update
Main Menu
HDD Overwrite
Language
Sensor
Pre FPS
Pre Duration
P.T.Z Controller
P.T.Z Setup
Normal
Alarm
Motion
Schedule
Duration
Priority
Apply
Resolution
Frame Rate
Sound On/Off
Recordin
g
Q
ualit
y
Setu
p
Schedule
Auto Delete Mode
Date Format
Time/DST Set
Video Type
System ID
Deinterlace
User Name
New Password
Confirm PW
Camera Setting
Setu
p
Motion

15
H.264 DVR - Installation/ O
p
eration Manual
Network Set DDNS
IP SET
E-Mail Registration
Event
Video Loss
DDNS
User ID
User Password
Domain
Dynamic IP
IP
GateWay
Netmask
DNS Server
DSL ID
DSL PW
DVR Port
Web Port
NTP
E-Mail Out
Beep Out
Alarm Out
Alarm
Motion
Power Loss
Search Menu
Archive
Lo
g
All
Power
Record
Operation
Client
Event
Search
Date/Time
Event
Calendar
All
Power
Internal
External
SMTP Mode
Duration
Preview

16
H.264 DVR - Installation/ O
p
eration Manual
3-2 Main Menu
NOTE
Before use, be sure to setup the unit properly.
When ‘MENU” button is pressed, “Password” is required first. Then, below menu shows on the screen.
‘- Mouse
Please use UP() / DOWN() Numeric buttons on the front panel or Mouse to move to next menu.
To move to the submenu, use the “SELECT” button or mouse. It will be applied instantly without
“Apply”.
Display
-Camera Setting
User can change Brightness, Saturation, Contrast, Hue.

17
H.264 DVR - Installation/ O
p
eration Manual
- Camera Covert
It allows hidden Camera, which mean, even live monitoring screen isn’t shown on the screen(black
screen), however, the recording( if recording is “on” condition) is activating.
- Camera Name
Camera title can be written on the screen in both System(DVR) and Client(Network). It will be
available up to 30 characters, if the monitor couldn’t show it in 1 line, it will be shown as ___ …. For
example, ‘FIRST MEETING ROOM’ -> ‘FIRST MEETIN…’

18
H.264 DVR - Installation/ O
p
eration Manual
- Spot Setting
<ChannelDivision> <Event>
Spot output is used when user would like to see event channel instantly. For example, if you want to
see ‘Motion’ event channel, please set as ‘Motion’ in the ‘Mode’ section then, select duration. Spot
Mode is available from ‘Single/Quad/9Channel/16Channel/Alarm/Motion/Audio.
- OSD Setting
User can select OSD On/Off, Event, Camera Name on/off and Blending as well.
New setting value will be applied instantly without pressing “Apply”.
- EVENT Clear : It is for erasing OSD characters related with events.
- APPLY : In order to save any modified setting value, please press “SEL” key in the “SAVE”
NOTE
In every first sub menu_ Display, Recording, System, Network, Event has “SAVE” feature in the
above. If any setting value is changed, “SAVE” is required to save the new value. User can simply
save new value pressing “SAVE” once in one sub menu. Camera Setting & OSD Setting doesn’t need
to be pressed “ SAVE”.

19
H.264 DVR - Installation/ O
p
eration Manual
Recording
In our system, all recording setup will be applied globally.
-Global
All the setup values will be applied globally to all channels.
-HDD Overwrite
It sets the recording mode when the HDD capacity is exceeding. It can be selected between “On”
(overwrite) / “Off” (stop).
- Pre Resolution
It supports 360x240 / 720x240 / 720x480 mode(based on NTSC). The default is 360x240 and “Sel, ↑,
↓” arrow button is for changing the figures.
-Pre Duration
As the system support “Pre recording” function, user can select frame rate and Duration as well.
-Post Duration
After event occurred, it sets how long the recording continues. The value is selectable among
5/ 30/ 60/ 90/ 120/ 150/ 180/ 210/ 240 sec.
-Quality
It selects among High, Mid, Low .

20
H.264 DVR - Installation/ O
p
eration Manual
-Privacy Region Set
User can select privacy region with mouse after dragging on the display for privacy purpose.
-Normal
It executes the continuous recording according to the designated set-up value.
The above shows available frame rate each channel. In 360x240 modes, 30 fps is available each
channel (totally 120fps), 720x 240 is 15 fps each (Totally 60fps), 720x480 is 7.5 fps each(Totally
30fps). Individual frame rate control is available and selecting audio on/off individually as well.
Figures can be changed pushing the “↑,↓” button.
-Alarm
It executes the recording when sensor is taken. How to set is same as Normal.