Pentair LENTON S Series User manual

TECHNICAL SUPPORT:
www.erico.pentair.com
PDF121_H
INSTRUCTION SHEET
1 of 2
Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are registered trademarks of Pentair or its global affiliates. All other trademarks are the
property of their respective owners. Pentair reservers the right to change specifications without prior notice.
WARNING:
Pentair products shall be installed and used only as indicated in Pentair product instruction sheets and training materials. Instruction sheets are available at www.erico.pentair.com and 1.
from your Pentair customer service representative.
Pentair products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings. 2.
All instructions must be completely followed to ensure proper and safe installation and performance. 3.
Improper installation, misuse, misapplication or other failure to completely follow Pentair's instructions and warnings may cause product malfunction, property damage, serious bodily 4.
injury and/or death, and void your warranty.
The customer is responsible for:
a. Conformance to all governing codes.
b. The integrity of structures to which the products are attached, including their capability of safely accepting the loads imposed, as evaluated by a qualified engineer.
c. Using appropriate industry standard hardware as noted above.
SAFETY INSTRUCTIONS:
All governing codes and regulations and those required by the job site must be observed.
Always use appropriate safety equipment such as eye protection, hard hat, and gloves as appropriate to the application.
LENTON LOCK
S SERIES
© 2008-2016 Pentair All Rights
Reserved

TECHNICAL SUPPORT:
www.erico.pentair.com
PDF121_H
INSTRUCTION SHEET
2 of 2
Pentair, CADDY, ERICO CADWELD, ERICO CRITEC, ERICO, ERIFLEX, and LENTON are registered trademarks of Pentair or its global affiliates. All other trademarks are the
property of their respective owners. Pentair reservers the right to change specifications without prior notice.
© 2008-2016 Pentair All Rights
Reserved