Pentax PTS-10 User manual

PENTAX'B)
ELECTRONIC TOTAL STATION
PTS-l0
INSTRUCTION MANUAL
ASAHI PRECISION CO.,LTD.
Specializing in quality
used surveying and
optical equipment
Hodgens Equipment Sales
www.hodgens.net [email protected]
800-463-4367
Specializing in quality
used surveying and
optical equipment
Hodgens Equipment Sales
www.hodgens.net [email protected]
800-463-4367

Contents
[j] Standard Equipment ......................................................................................... 3
oOptional Accessories .............................".......................................................... 3
[iJ Nomenclature of Parts ............ ........................................................................ 7
oKeyboard ............................................................................................................ 9
CD Preparation for Surveying ............................................................................... 11
[1) Leveling and centering of the instrument ............................................ 11
(When coarse centering using a plumb bob is performed)
1) Setting up the instrument and the tripod ...................."....................... 11
2) Leveling with the circular vial ........................"..................................... 11
3) Leveling with the plate vial ................................................................... 11
4) Centering with the optical plummet ..........................................".......... 12
(When coarse centering using a plumb bob is not performed)
1) Setting up the instrument and the tripod .................................. "" ....... 12
2) Centering and leveling with the optical plummet .. ".......................... 12
3) Leveling with the plate vial ................................................................... 12
[2) Turning the power on ..................".......................................................... 13
oSurveying ............................................................................................................ 14
1) Eyepiece adjustment ................................................................................ 14
2) Object sighting .............................................................................................. 14
mAngle Measurement .......................................................................................... 14
1) Horizontal (clockwise) and vertical angle measurement .................... 14
2) Horizontal angle (counter-clockwise) measurement .............................. 14
3) Multiple angle measurement .......................................................... 15
4) Angle measurement by the direction method ..................................... 15
[!]Distance Measurement .................................................................................... 16
1) Temperature and pressure input ........................................................... 16
2) Prism constant input ................................................................................. 17
3) Display mode selection ............................................................................. 17
4) Prism collimation ..................................................................................... 18
5) Distance measurements .......................................................................... 18
6) Conversion to other measuring modes .................................................. 19
7) Stake-out measurements .......................................................................... 19
[!J Coordinate Measurements .............................................................................. 20
1) Instrument coordinates input ................................................................... 20
2) Coordinate' measurement ....................................................................... 20
-1-
Specializing in quality
used surveying and
optical equipment
Hodgens Equipment Sales
www.hodgens.net [email protected]
800-463-4367

[!) Internal Switches ............................................................................................... 21
1) Prism constant setting .........................................."...................."............ 21
2) Auto power off time setting .................................................................... 21
3) Automatic vertical compensation cancel "" ...................." .................... 22
4) EDM power cancel ............. "..................... "........................................... 22
5) Atmospheric correction cancel ............".................................................. 22
6) Constant display switch ............................................................................ 22
7) Atmospheric refraction and earth curvature correction switch ......... 23
8) Unit switch (meters, feet) ........"............................................................... 23
9) Number of averaged measurements .... "............................................... 23
10) Angle mode selection "" .......................................................................... 24
11) Display contrast adjustments .... "............................................................ 24
[!] Error Codes ".............. "................. "" .............. "" .................."...................."..... 25
[!J Batteries ............................................................................................................. 26
['] On-board battery .........................."........................................... "............ 26
[2] External battery .........................................................................."............. 26
[!] Attach and detachment of tribrach ............... "" ...................."...................... 27
[!] Standard Combination ................ "" .................... "" ......................"................. 28
1) Reflecting prism unit ........".................... "................................................. 28
2) Target ....................................................................................................." .... 29
3) Pole adaptor ................................................................................................ 29
illExternal Power Source ............. "......................"...................."...................." .. 30
1) External battery (MB·22) ..... "" ......................"....................".................... 30
2) External battery charger (MC-22) ....... "......................"...................."...... 30
[!] Diagonal Eyepiece sB-8 "...................." ...... "" ................................................. 30
illData Collector DC-' ...... "...................." ....................... ".........................."....... 31
[!] Maintenance ....................................................................................................... 32
illStoring .................................. "..................... ".................................................... 32
[!] Perpendicul.uity of Plate Vial to Vertical Axis .................. "" ........................ 33
illPerpendicularity of Circular Vial to Vertical Axis ................. "...................... 33
[!) Inclination of Reticle Pattern Cross Hair .... ".......................................... "...... 34
illPerpendicularity of Line of Sight to Horizontal Axis .................."................ 34
[[] Inspection and Adjustment of Vertical 0 Point Error .................................... 35
[!)Coincidence of Line of Sight of Optical Plummet with Vertical Axis .... " .. 36
[lJQffset Constant ................"..................."..................."................"..................... 37
[!]Checking of Alignment of Beam Axis with Line of Sight ................"......... 38
[!] Cautions on Inspection and Adjustments ........................ "........................... 38
-2-

[iJ Standard Equipment
• Body (with hood and objective cap) ..................... 1
• On-Board Battery (MB15) .................................. 1
• On-Board Battery Quick Charger (MC14) ......... 1
(with soft case)
• A Set of Plumb Bob ........................................... 1
• A Set of Tool (with case) ................................... 1
(cleaning brush, 2 drivers, hexagonal
wrench, 2 adjusting pins)
• Silicon Cloth ....................................................... 1
• Rain Cover .......................................................... 1
• Carrying Case ..................................................... 1
[3] Optional Accessories
• Data Collector
• Prism
Unit
• External Battery
• Supplementary Target Plate
• Coaxial Type Target
for Triple Prism
• Tribraches
• Tripods
1P Tilting Unit
MpU5A
3P Unit
MPU7A
-3-
• Pole Adaptor
• External Battery Charger
• Diagonal Eyepiece
• Eyepiece Prism
• Car-battery Cord
• Car-battery Charger
• Compass
• Sun Filter
Triple Prism
Target Plate
SlllJplementary
Tilt Tatgot
MT22
Specializing in quality
used surveying and
optical equipment
Hodgens Equipment Sales
www.hodgens.net [email protected]
800-463-4367

c/;:;i:jtJ
11'1831-11'1832
(511'1) (1011'1)
(r.;£~?1tJ
11'1841'11'1842
On board battery quick charger Car battery charger (Cigar socket Type~
Car battery cord
(Booster type)
(511'1) (10M)
Car battery cord
(Cigm socket type)
r.5:r;:~4(~~q1rC:~
Me 22 t:xternal battery MI322
charger (AC 1JQV!220V) External battery
DC-' Data-colledor
j ¢
MB 57
Data-output cord
j 11'1858 Da'. ,,.nsmlsslon coed
Computors 1
I t
~
. (c::::::::~:: ____ _
/PR--- ,1J
MB 15 tJ; ....
On bo.," ~tl"'Y
Bar cornpilss
---~jlj
Eyepiece prisrn SP-3
TS-3
TS-7
Metalic tripod Wooden tripod
i i
U
i
MT 48
~ Mini t>ole Adaptor B2
r-----
,...J"1I!t,
<~',:~~.;:j
. MP 26
Sin!1k~ Pri~m
Tilt Hold8r-B
Tilt Tatgel
Plate-S
-4-
MT47
f~ Tamet Pole
V.
J Ad;,ptor-B
"!. 6
_.' r .1---.-./
( \\ '-~·lr ~rr,"1
\,:; r flt
Hange t>ole Adaptor-B

Telescope Section
Image ...................................
Magnification
.................... .
Effective Aperture
...... .
Resolving Power
Field
of View .................... ..
Minimum Focus.
Erecting
32X
45mm (EDM-54mm)
3"
2.3% (2.3m at 100m)
1.4m
Distance Measurement Section
Measuring Range ............ 1Prism: 1,400m
(4,590ft)
Accuracy ...........................
Minimum Count.
Measuring Time.
Measuring System.
3Prism: 2,OOOm
(6,560ft)
(under normal weather
condition)
±(5mm + 5ppm) m.s.e.
Fine Mode: 1mm/O.003ft
TR Mode: 10mm/.1ft
Fine Mode: 5 seconds
TR Mode: 1second
Automatically
Repeated Measurement
7,999.999m
Temperature:
1°C (1'F)
per step
Display of Maximum ......
Slope Reduction
Atmospheric Correction.
Input (with
memory
function) Pressure: 1
mmHg (0.1 in Hg)
per step. PPM shown in
same time
Prism Constant .............. ..
Correction Range
(with
memory function)
-99 ~ +99mm in 1mm
step by internal switch
Average Mode ................. Display
of Averaged
Distance
of 3/5 times
measurements
selectable by internal
switch
Stake-out Function .......... Display
of (measured
distance) minus
(-)
(specified distance)
Earth Curvature and ....... ON/OFF-selectable by
Refraction Correction internal switch
Atmospheric Correction.... 0.14/0.2-selectable
by internal switch
Measurement Unit .......... Meter/Feet-selectable
by internal switch
(Conversion Rate:
1m = 3.280833Oft)
-5-
Angle Measurement Section
Angle Measurement .......
Mode
Detection Mode ...............
Minimum Count ............ ..
Accuracy.
Measuring Time.
Circle Diameter
Incremental Rotary
Encorder
Horizontal Angle:
Diametrically opposite
detection
Vertical Angle:
single detection
5" (1Occ)
Less than 5"
(Standard Deviation)
Less than 0.2"
(Continuous
Measurement)
79mm
Measurement Mode ....... Horizontal Angle:
Display
Clockwise/Counter-
Clockwise/Repetition
of the angle
Vertical Angle:
Zenith
OO/Horizontal 0'
-selectable by internal
switch
Type ................................... Dot-Matrix
LCD, 2 lines
Display (Both Sides
of Alidade)
Display Combination ...... Vertical Angle/
Horizontal Angle,
Horizontal Distance/
Horizontal Angle,
Slope Distance/
Vertical Angle,
Vertical Distance/
Hight
of Station (Z),
X(N) Coordinate!Y(E)
Coordinate
Vertical Angle Compensation
Type ................................... Automatic
Compensation
(ON/OFF-selectable
by internal switch)
Liquid Type
Compensation Range ..... ±3'
Sensitivity of Vial
Plate vial .......................... 30"/2mm
Circular vial..................... 8'/2mm
Specializing in quality
used surveying and
optical equipment
Hodgens Equipment Sales
www.hodgens.net [email protected]
800-463-4367

Optical Plummet
Image ................................ Erecting
Magnification .................. 3X
Focusing Range ...............
0.5m--
oo
Reticle Illumination (Built-in)
Light Source .. .
Type ................................
..
Data Output
Interface ......................... ..
Green LED
Intensity adjustable
in 3 steps
RS-232C
(Baud Rate, Parity
ON/OFF, Data Length,
Stop
Bit-selectable)
Auto Power Off Function
(On·Board Battery in only use)
Time Setting .....................
2/5/10 min. OFF after
operation
(ON/OFF-selectable
by internal switch)
Ambient .................. -20°C~+50°C/
Temperature -4':'F-4122'F
Range
Tripod Thread.............
5/8" x 11
Dimensions and Weight
INSTRUMENT (PTS-10)
Width .............................. ..
Length ...............................
Height ..............................
Weight .. .
PLASTIC CASE
Width .......................
Length ................
Height ......................
Weight ..............................
17Bmm
162mm
382mm
7.7kg/17.0 Ibs
338mm
448mm
23Bmm
4.0kg/8.8 I bs
-6-
On-Board Battery (MB15)
Power Source .,
Output Voltage .......
Operation Time ..............
..
per Charging
Weight ..............................
NiCd Battery
(Re-chargeable)
DCB.4V
3 hours (Continuous
operation both of
angle and distance
measurement)
10 hours (Continuous
operation of angle
measurement only)
0.6kg/1.3 Ibs
On-Board Battery Quick Charger (MC14)
(Automatic Power Off Mechanism Built-in)
Input Voltage ......... AC,OO/120/220/240V
Input Frequency .............. ..
Charging Time
Working Temperature
Range
Weight ........................
..
(Variable)
50/60Hz
, hour
+10'C-440'C/
450'F·-+104'F
1.5kgl3.3 Ibs
Specializing in quality
used surveying and
optical equipment
Hodgens Equipment Sales
www.hodgens.net [email protected]
800-463-4367

IT] Nomenclature of Parts
Objective Lens
liquid-Crystal
Display Panel
Lower Clamp
Screw------1
Lower Tangent
Screw
--e-_::::EE!"!f'l ,------ Hand Grip
-7-
Hand Grip Locking Screw
Aiming Collimator
Optical Plummet
Key Board
Circle Rotating Ring
External Battery Connector
08:i~S--- Bottom Plate

Charger Connector
Focusing Knob
----,--
Telescope Eyepiece
Plate Vial
Circular Vial
---:=,,,.j
*Reticle Illumination Switch
Whenever press the Reticle Illumination Switch, the illumination
changes to High -' Middle -' Low and Off.
-8-
--13atterv Locking Screw
""----- Data Output and
Communications
Connector
Tribrach Locking Lever
Specializing in quality
used surveying and
optical equipment
Hodgens Equipment Sales
www.hodgens.net [email protected]
800-463-4367