peplink Pepwave MAX BR1 IP67 Operating instructions

Installation recommendation
Pole Mount
www.peplink.com
©Peplink. All rights reserved.
BR1 IP67
Steps:
1. Place the flat brackets onto
the pole horizontally.
2. Making use of the holes in the
brackets, attach the two
semicircular pole connectors
to the bracket, securing it with
washers and nuts.
3. Insert four long screws with
washers through the holes in
the brackets and into the
designated holes in the BR1
IP67.
4. Tighten the nuts on each
side.

Installation recommendation
Pole Mount
www.peplink.com
©Peplink. All rights reserved.
BR1 IP67
Steps:
1. Place the flat brackets onto
the pole vertically.
2. Making use of the holes in
the brackets, attach the two
semicircular pole connectors
to the bracket, securing it
with washers and nuts.
3. Insert four long screws with
washers through the holes in
the brackets and into the
designated holes in the BR1
IP67.
4. Tighten the nuts on each
side.

Installation recommendation
Wall Mount
www.peplink.com
©Peplink. All rights reserved.
BR1 IP67
Steps:
1. Drill four holes into the
wall, matching the
position of the holes in
the BR1 IP67.
2. Insert wall plugs into
each of the drilled holes.
3. Make sure the holes in
the BR1 IP55 align with
the drilled holes.
4. Secure it with four
screws.