Pepperl+Fuchs VisuNet GMP DM200 Series User manual

PROCESS AUTOMATION
MANUAL
VisuNet GMP DM200 Series
Hardware Manual

With regard to the supply of products, the current issue of the following document is ap-
plicable: The General Terms of Delivery for Products and Services of the Electrical Indus-
try, published by the Central Association of the Electrical Industry (Zentralverband
Elektrotechnik und Elektroindustrie (ZVEI) e.V.) in its most recent version as well as the
supplementary clause: "Expanded reservation of proprietorship"
VisuNet GMP DM

VisuNet GMP DM
3
1 Safety .......................................................................................... 5
1.1 Validity................................................................................................... 5
1.2 Symbols Used ...................................................................................... 5
1.3 System Operator and Personnel ........................................................ 5
1.4 Pertinent Laws, Standards, Directives, and further Documentation5
1.5 Intended use......................................................................................... 6
1.6 Installation and commissioning ......................................................... 6
2 Product Specifications............................................................... 7
2.1 Overview ............................................................................................... 7
2.2 Technical Data ...................................................................................... 8
2.3 Dimensions VisuNet GMP DM series ................................................. 9
2.4 Interfaces and connectionsVisuNet GMP DM ................................. 10
2.4.1 VGA interface................................................................................... 10
2.4.3Supply Voltage 24 V......................................................................... 11
2.4.4Supply Voltage 120/230 V (AC)........................................................ 11
2.5 Accessories........................................................................................ 12
2.5.1 Keyboards........................................................................................ 12
2.5.2 Pedestals ......................................................................................... 15
2.5.3 Wall arm versions............................................................................. 16
2.5.4 Wall bracket ..................................................................................... 16
2.5.5 Hole pattern of the mounting versions.............................................. 17
2.5.6 Power supply accessories................................................................ 18
2.4.2 DVI interface..................................................................................... 10
2.5.7Barcode reader................................................................................. 18
2.5.8Dimensions with barcode handheld.................................................. 19
2.5.9Holder for handheld barcode reader................................................. 20
3 Installation and Commissioning ............................................. 21
3.1 Preparation ......................................................................................... 21
3.2 Mounting in the field.......................................................................... 21
3.2.1 Grounding at pedestal and wall arm................................................. 21
3.3 Commissioning VisuNet GMP .......................................................... 22
2.4.5Supply voltage 12 V (PA version) ..................................................... 11

4
VisuNet GMP DM
4.1 On Screen Display..............................................................................24
4.1.1 Audio menu ...................................................................................... 26
4.1.2 Bright-Contrast menu ....................................................................... 27
4.1.3 Menu Color ...................................................................................... 28
4.1.4 Image menu ..................................................................................... 29
4.1.5 Tools menu....................................................................................... 30
4.1.6 Input menu ....................................................................................... 31
4.1.7 Exit menu ......................................................................................... 32
5 Appendix ................................................................................... 33
5.1 Chemical resistance of keyboard foil ...............................................33
5.2 Chemical resistances of the touch screen ......................................33
4 Operation................................................................................... 24

VisuNet GMP DM
Sicherheit
219365 2017-02
5
1
1.1
1.2
Safety
Validity
The chapter “Safety” is valid as instruction manual.
Specific processes and instructions in this instruction manual require special provisions to
guarantee the safety of the operating personnel.
Symbols Used
This document contains symbols for the identification of warning messages and of informative
messages.
Warning Messages
You will find warning messages, whenever dangers may arise from your actions. It is mandatory
that you observe these warning messages for your personal safety and in order to avoid
property damage.
Depending on the risk level, the warning messages are displayed in descending order as
follows:
Informative Symbols
Action
This symbol indicates a paragraph with instructions. You are prompted to perform an action or
a sequence of actions.
1.3 System Operator and Personnel
Responsibility for planning, assembly, commissioning, operation, maintenance, and
dismounting lies with the plant operator.
The personnel must be appropriately trained and qualified in order to carry out mounting,
installation, commissioning, operation, maintenance, and dismounting of the device. The
trained and qualified personnel must have read and understood the instruction manual.
1.4 Pertinent Laws, Standards, Directives, and further Documentation
Observe laws, standards, and directives applicable to the intended use and the operating
location. Observe Directive 1999/92/EC in relation to hazardous areas.
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.
Note!
This symbol brings important information to your attention.

219365 2017-02
6
VisuNet GMP DM
Sicherheit
1.5
1.6
The corresponding datasheets, manuals, declarations of conformity, EU-type examination
certificates, certificates, and control drawings if applicable (see datasheet) are an integral part
of this document. You can find this information under www.pepperl-fuchs.com.
Due to constant revisions, documentation is subject to permanent change. Please refer only to
the most up-to-date version, which can be found under www.pepperl-fuchs.com.
Intended use
The device is only approved for appropriate and intended use. Ignoring these instructions will
void any warranty and absolve the manufacturer from any liability.
The devices must not be repaired, changed or manipulated. If there is a defect, the product
must always be replaced with an original device.
Installation and commissioning
The device must only be operated in the specified ambient temperature range and at the
specified relative humidity without condensation. The device is rated up to 2000 m and is
intended to be used in a Pollution Degree 2 environment.
Overcurrent protection is achieved external to the equipment: 15 A overcurrent protection must
be provided by the building installation.
A readily accessible disconnect device must be incorporated external to the equipment.
Use shielded cable
To connect interfaces only use shielded cable.
Screwing/locking connectors
To advance the cable shield screw/lock the connectors.
The device must be disconnected from the power supply prior to installation and maintenance.
The power supply may be activated only after all the circuits required for operation have been
fully assembled and connected.
Leading of data cables and power circuit lines
Lead data cable and power circuit line in separate cable channels.
Check cables and connectors
Before commissioning the system check all cables and connectors.

VisuNet GMP DM
Product Specifications
219365 2017-02
7
2
2.1
Product Specifications
Overview
GMP (“Good Manufacturing Practice”) is a set of guidelines for assuring the quality of
production processes in controlled industries and closely follow the guidelines issued by the
European Commission or the FDA in the US. GMP applications are typically used in the
pharmaceutical and food industries. However, products that conform with GMP guidelines are
also required for the manufacture of cosmetics and fragrances or flavors.
The materials selected, design of the surfaces, and architecture of the overall system should
prevent the accumulation of fluids and dirt. Cleaning, maintenance, inspection and servicing
must be as safe and easy as the processes employed for the disinfection of mechanical
components.
The VisuNet GMP product portfolio extends from simple direct monitors and remote monitor
systems with Ethernet connection to a host, to complete PCs available with single or dual
monitor systems and various mounting options. Models feature a 19-inch, 21-inch, or 22-inch
display with an optional touch screen. The stainless steel housings have an IP65 degree of
protection. Remote monitors and PCs are equipped with Ethernet, USB, PS/2, and RS232
interfaces.
The VisuNet GMP product family guarantees a perfect fit for every system infrastructure.
Four models are available depending on the functions required, the display and input unit, and
the distance over which the data is transferred. This manual describes the VisuNet GMP direct
monitor (DM):
VisuNet GMP DM are direct monitors that are directly connected to the VGA or DVI interface
of the host. Industrial keyboards with integral mouse connected directly to the host are
available as accessories.

219365 2017-02
8
VisuNet GMP DM
Product Specifications
Overview of features
■The brilliant display provides high meter-reading comfort
■Easy, user-friendly operation due to optionally available touch screen
■Image position, pixel frequency, and phase will be detected and
synchronized automatically
■Rugged stainless steel housing (304/1.4301 - others on demand)
■Degree of protection IP65
■High-end finish of all surfaces
2.2 Technical Data
max. 5 m
DM
HOST
VisuNet GMP DM219 VisuNet GMP DM221 VisuNet GMP DM222
General specifications
Ty p e Direct monitor
Supply
Power supply 20 ... 30 V DC; 90 ... 240 V AC, 50 ... 60 Hz
Power consumption 40 W
Indicators/operating means
Display
Ty p e TFT, LCD, High Color (24 bit)
Screen diagonal 19 '' 21.5 "22 "
Resolution 1280 x 1024 Pixel 1920 x 1080 Pixel 1680 x 1050 Pixel
Representable colors 16,7 Mio.
Brightness 300 cd/m2

VisuNet GMP DM
Product Specifications
219365 2017-02
9
2.3 Dimensions VisuNet GMP DM series
Figure 2.1 Dimensions DM219
Figure 2.2 Dimensions DM221/DM222
Input devices Analog resistive touchscreen (optional) ,
Input device combined with keyboard and optional trackball/touch
screen/joystick
Interface
Interface type VGA or DVI
Ambient conditions
Ambient temperature 0 ... 50 °C0 ... 50 °C0 ... 45 °C
Mechanical specifications
Protection degree IP65
Installation panel mounting
several mounting devices (rotatable/fix) available
Mass 18 kg 20 kg 20 kg
Dimensions 568 mm x 450 mm x
65 mm
625 mm x 450 mm x
73 mm
625 mm x 450 mm x
73 mm
9
10
9
10
228.5
378
39.5
568
450
73
9
10
9
10
228.5
378
39.5
625
450
73

10
VisuNet GMP DM
Product Specifications
2.4 Interfaces and connections VisuNet GMP DM
The interfaces and connections of the VisuNet GMP are located within the VESA adapter at the
back of the housing.
The following interfaces are available:
Figure 2.3 VESA adapter at the back of the VisuNet GMP housing
2.4.1 VGA interface
15-pin HD-D-Sub socket "VGA" required for monitor/host connection.
Picture Pin Signal Pin Signal Pin Signal
1RED 6RED_GND 11 not in use
2GREEN 7GREEN_GND 12 IIC-DATA
3BLUE 8BLUE_GND 13 HSYNC
4not in use 9+ 5 V 14 VSYNC
5GND 10 GND 15 IIC-CLOCK
1
6
5
15 11
A
B
C
D
Phoenix DFK-MSTB 2,5/4-GF-5,08
Ground connection (M4)
VG interA face
DVI interface
C
D
A
B
2.4.2DVI interface
Picture Pin DVI-D Pin DVI-D Pin DVI-D
1 TMDS data 2 - 9 TMDS data 1 - 17 TMDS data 0 -
2 TMDS data 2 + 10 TMDS data 1 + 18 TMDS data 0 +
3 TMDS data 2/4
shield
11 TMDS data 1/3
shield
19 TMDS data 0/5
shield
4 TMDS data 4 - 12 TMDS data 3 - 20 TMDS data 5 -
5 TMDS data 4 + 13 TMDS data 3 + 21 TMDS data 5 +
6 DDC clock (SCL) 14 +5 VDC 22 TMDS clock shield
7 DDC data (SDA) 15 Ground 23 TMDS clock +
8 Not used 16 Hot plug detect 24 TMDS clock -
219365 2017-02

VisuNet GMP DM
Product Specifications
219365 2017-02
11
2.4.3 Supply Voltage 24 V
4-pin socket required for supply voltage connection (Phoenix Contact DFK-MSTB 2,5/ 4-GF-
5,08).
The VisuNet GMP KM has inverse-polarity protection.
Matching plug: Phoenix Contact MSTBT 2,5/ 4-STF-5,08
2.4.5Supply voltage 12 V (PA version)
Required for supply voltage connection via terminal block.
Picture Pin Signal
1GND
2GND
3+ 24 V DC
4+ 24 V DC
1
2
3
4
41
Picture Pin Signal
1GND
2GND
3+ 12 V DC
4+ 12 V DC
41
2.4.4Supply Voltage 120/230 V (AC)
4-pin socket required for supply voltage connection (Phoenix Contact DFK-MSTB 2,5/ 4-GF-
5,08).
Matching plug: Phoenix Contact MSTBT 2,5/ 4-STF-5,08
Danger!
Electric shock
Substantial material damage, personal injury, or even death.
Connect the 4-pin socket as shown in the following table. Only connect the voltage
supply when the device is completely installed.
Picture Pin Signal 120/230 V AC
1PE
2n. c.
3 L
4 N
1
2
3
4
41

VisuNet GMP DM
Product Specifications
12
2.5
2.5.1
Accessories
The following accessories are available.
Keyboards
There are several keyboard models available. All keyboards have an antibacterial coating.
For this reason, the keyboards are perfectly suitable for environments with high hygienic
standards.
Keyboard TA3-K4
Keyboard with touchpad for controlling the mouse pointer.
2 separate buttons below the touchpad assume the function of left and right mouse button.
Figure 2.4Keyboard with touchpad
TA3-K4
General specifications
Ty p e Keyboard with touchpad
Supply
Rated voltage via data line
Indicators/operating means
Keyboard 105 short stroke keys
Keyboard layout: US international, German, French, (further
keyboard layouts on demand)
Touchpad
Active Principle capacitive
Resolution 40 Pts./mm
Dimensions 66 x 50 mm
Driver Microsoft Mouse ® , USB
Interface
Interface type USB
Conformity
Protection degree IP65
Ambient conditions
Ambient temperature -20 ... 50 °C (-4 ... 122 °F)
219365 2017-02

13
VisuNet GMP DM
Product Specifications
Keyboard TA3-K6
Keyboard with joystick for controlling the mouse pointer.
2 separate buttons below the joystick assume the function of left and right mouse button.
Figure 2.5Keyboard with joystick
Storage temperature -20 ... 70 °C (-4 ... 158 °F)
Relative humidity max. 85 % , non-condensing
Mechanical specifications
Material anodized aluminium , Polyester foil
Mass 1.2 kg
Dimensions 482.6 mm x 177.8 mm x 45 mm
Cable length 1.8 m , wire end ferrule
TA3 - K6
General specifications
Ty p e Keyboard with joystick
Supply
Rated voltage via data line
Indicators/operating means
Keyboard 105 short stroke keys
Keyboard layout: US international, German,
French, (further keyboard layouts on demand)
Joystick
Driver Microsoft Mouse ® , USB
Interface
Interface type USB
Conformity
Protection degree IP65
TA3-K4
219365 2017-02

VisuNet GMP DM
Product Specifications
14
Keyboard TA3-K8
Keyboard with optical trackball for controlling the mouse pointer.
2 separate buttons below the trackball assume the function of left and right mouse button.
Figure 2.6Keyboard with optical trackball
Ambient conditions
Ambient temperature -20 ... 50 °C (-4 ... 122 °F)
Storage temperature -20 ... 70 °C (-4 ... 158 °F)
Relative humidity max. 85 % , non-condensing
Mechanical specifications
Material anodized aluminium , Polyester foil
Mass 1.2 kg
Dimensions 482.6 mm x 177.8 mm x 45 mm
Cable length 1.8 m , wire end ferrule
TA3-K8
General specifications
Ty p e Optical trackball
Supply
Rated voltage via data line
Indicators/operating means
Keyboard 105 short stroke keys
Keyboard layout: US international, German,
French, (further keyboard layouts on demand)
Trackball
Diameter 50 mm
Material Phenolic resin, polyester, epoxide resin (grey)
Driver Microsoft Mouse ® , USB
TA3-K6
219365 2017-02

15
VisuNet GMP DM
Product Specifications
2.5.2 Pedestals
Figure 2.7Pedestal models for VisuNet GMP
Interface
Interface type USB
Conformity
Protection degree IP65
Ambient conditions
Ambient temperature 0 ... 50 °C (32 ... 122 °F)
Storage temperature -10 ... 70 °C (14 ... 158 °F)
Relative humidity max. 85 % , non-condensing
Mechanical specifications
Material anodized aluminium , Polyester foil
Mass 1.2 kg
Dimensions 482.6 mm x 177.8 mm x 45 mm
Cable length 1.8 m , wire end ferrule
TA3 - K8
AA ABB B
A
1500
500
1000
155
300
1270
1000
560
750
420 225 350
540
2 3 4 5 6 71
Model number Description
1PEDESTAL1-150-1V-KP-G-T-304 Pedestal, turnable approx. 350°, inclination of monitor 10°, with pipe
for keyboard
2PEDESTAL1-150-1V-KP-G-F-304 Pedestal, fix mounted, inclination of monitor 10°, with pipe for
keyboard
3PEDESTAL1-150-1V-NP-G-T-304 Pedestal, turnable approx. 350°, inclination of monitor 10°
4PEDESTAL1-150-1V-NP-G-F-304 Pedestal, fix mounted, inclination of monitor 10°
5PEDESTAL1-130-3V-NP-G-T-304 Pedestal, turnable approx. 350°, inclination of monitor 30°
6PEDESTAL1-130-3V-NP-G-F-304 Pedestal, fix mounted, inclination of monitor 30°
7PEDESTAL1-56-3V-NP-G-T-304 Pedestal turnable approx. 350°, inclination of monitor 30°
219365 2017-02

219365 2017-02
16
VisuNet GMP DM
Product Specifications
2.5.3 Wall arm versions
Figure 2.8 Wall arms for VisuNet GMP
2.5.4 Wall bracket
Figure 2.9 Wall bracket for VisuNet GMP
Model number Description
1WALL-ARM1-55-
1V-NT-G-*-304
Wall arm, inclination of monitor 10°, without pipe for keyboard
2 models available:
■WALL-ARM1-55-1V-NT-G-F-304: fix
■WALL-ARM1-55-1V-NT-G-T-304: approx. 350° turnable
2WALL-ARM1-55-
0V-KT-G-*-304
Wall arm, without inclination of monitor, with pipe for keyboard
2 models available:
■WALL-ARM1-55-0V-KT-G-F-304: fix
■WALL-ARM1-55-0V-KT-G-T-304: approx. 350° turnable
21
B B
500
775
575
100
250
815
520
865
990
285
Model number Description
1WALL-
BRACKET1-0-0V-
G-304
Wall bracket
1
C

VisuNet GMP DM
Product Specifications
219365 2017-02
17
2.5.5 Hole pattern of the mounting versions
Figure 2.10 Bottom attachment, turnable, fastening at front
Figure 2.11 Bottom attachment, fix mounted
Figure 2.12 Wall bracket
129
9
40
A
42-50
90
9
63-64
B
Ø 17
280
9
15
105
C

219365 2017-02
18
VisuNet GMP DM
Product Specifications
2.5.6 Power supply accessories
Power supply
Model number Description
BN-24/5000-HS-10 Power supply
DATL-A2-2.5-0 Power cable 2x 2.5mm², wire end ferrule, max. length 80 m
DATL-A2-4.0N/2.5F-1 Power cable 2x 4.0mm² +2.5m 2.5mm², wire end ferrule, length:
110 m
2.5.7Barcode Reader
The VisuNet GMP has an option for connection of a handheld barcode reader. The
following products can be used at present:
Barcode handheld Powerscan PSCAN-D-1D-N0-R3-10-N
The PSCAN-D-1* consists of a barcode handheld with connecting cable. The
connecting cable is a ʾ m long cable, and an 8-pin M12 connector is mounted.
Order designation PSCAN-D-1*
Device Order designation Description
PSCAN-D-1* PSCAN-D-1D-N0-R3-10-N Barcode handheld
NON-Ex
Sparepart cable SPAREPARTS-PSCAN-D-GP-CABLE-20 Sparepart cable for
PSCAN-D-1D-N0-R3-10-N

19
VisuNet GMP DM
Product Specifications
2.5.8Dimensions with Barcode handheld
Dimensions VisuNet GMP DM 219 with Barcode handheld
Dimensions VisuNet GMP DM 221 and DM 222 with Barcode handheld
682
29,5
~187
~97
131
74
152
85
152
13
450 73
740
29,5
~187
~97
131
74
152
85
152
13
450 74
219365 2017-02

VisuNet GMP DM
Product Specifications
20
2.5.9Holder for handheld barcode reader
Dimensions
85
30
71,5
90
120
152
14
67,6
219365 2017-02
This manual suits for next models
3
Table of contents
Other Pepperl+Fuchs Monitor manuals

Pepperl+Fuchs
Pepperl+Fuchs VBA-2E2A-KE4-ENC/SSI-S User manual

Pepperl+Fuchs
Pepperl+Fuchs VisuNet IND DM5 Series User manual

Pepperl+Fuchs
Pepperl+Fuchs VisuNet GXP Series User manual

Pepperl+Fuchs
Pepperl+Fuchs KFD2-SR2-Ex2.W.SM User manual

Pepperl+Fuchs
Pepperl+Fuchs VisuNet GXP Series User guide

Pepperl+Fuchs
Pepperl+Fuchs VisuNet GXP RM-GXP1100-22F User manual

Pepperl+Fuchs
Pepperl+Fuchs VisuNet DPU2100 Series User manual

Pepperl+Fuchs
Pepperl+Fuchs DA6-SSI/A-U User manual

Pepperl+Fuchs
Pepperl+Fuchs VISUNET GMP DM User manual

Pepperl+Fuchs
Pepperl+Fuchs DPU1100-J1 Series User manual