Perfect Prime IR0019 User manual

Thermal Imaging Camera
IR0019 New Version
Instruction Manual

Contents
P. 1
1. Overview
2. Considerations and Safety
Maintenance
3. Performance Index
4. Product Features
5. Initial Operation
6. Image Registration
7. Color Palette
8. Application of Color Palette
and Image Check/ Deletion
9. Measure Objects
10. Emissivity
11. The Table of Emissivity Value
12. Introduction to “Setting”
Sub-menu
13. Time Setting
14. Capture Thermal Points
15. "Video" Sub-menu
16. Thermal Imaging Image
Analysis Software Operation
Guide
......................................................................... 2 - 3
.................................................... 4
.......................................................... 5 - 6
............................................................. 7 - 9
................................................................. 10
............................................................. 11
....................................................................... 12
........................................ 13 - 14
................................................................ 15
........................................................................... 16
............................................. 17
..................................................... 18
...................................................................... 19
..................................................... 19
............................................................. 20
............................................. 21 - 23

1. Overview
P. 2
IR0019 is an infrared camera that integrates surface temperature
measurement and real-time thermal image. With this product, the
potential problems can be identied on the color display screen
which is helpful for users to locate the problem, take readings and
solve the issue.
The product has a visual camera integrated to increase the dierentia-
tion degree. The thermal images and full vision images can be stored
in the device and can be transferred to a computer to generate report
and printing.
The following are the major features of IR0019:
• High accuracy: The adjustable radiation coecient
increases the measurement accuracy of
reective surfaces.
• Time-saving: The traditional infrared thermometer needs
to measure every component one by one,
this is not necessary for IR0019.
• Easy to use: Turn on the device and start measuring
temperatures straight away.
• User-friendly: The thermal point and cold point temperature
automatically marks the area with the highest or
lowest temperature in real time.
• Adjustable: Five types of color palettes and emissivity values
provided.

1. Overview
P. 3
The product can be utilized in many elds, for instance:
1. Detect spills and leaks of chemicals: which have dierent
thermal signatures to the surroundings.
2. Fire ghting: Vision can be obscured by smoke and debris in
the event of a re, thermal imaging can see through this and
locate victims or re spots.
3. Locate the source of abnormal leaking of heat: of a house or
a machine, nd out the problem area and x it.
4. Enable drug-enforcement: units to locate cannabis plants by
detecting abnormal amount of heat spot in buildings.
5. Moisture detection: Areas with lower temperatures to its
uniform surroundings can be a source of moisture staining
or damage.
6. Measure body temperatures: Point the thermal imaging
camera at a person to nd their surface body temperature
7. Night vision: Measuring the electromagnetic energy given
o when objects emit heat, the IR0019 translates those
energy into visible light for users to see them in the dark.
8. Building inspection: Check that heat is retained uniformly in
a building.
IR0019 is the ideal selection for electrician, maintenance personnel,
technicians and even the emergency personnel.

P. 4
2. Considerations and
Safety Maintenance
Please read the instructions carefully so as to
ensure accurate measurement results and safety:
DANGER
Do not use the device in
explosive, ammable or
corrosive environments.
When the product works, there
is a tiny clicking sound every
several seconds. This is a
normal phenomenon as the
lens captures images to
produce electronic noises.
Since the product is a
precision electronic and
sensitive optical device, do
not drop it or allow impacts
to occur to prevent damage.
It is suggested to use the
attached USB cable
Do not dismantle the product,
doing so can damage it and
revoke the warranty.
Please use a damp cloth or
gentle soap to clean the
enclosure of the device. Do not
use abradant, isopropanol or
solvent to clean. Special
optical lens cleaner should be
used to clean the screen.

3. Performance Index
P. 5
Display screen
Infrared image resolution
LCD resolution
Visible image resolution
Field angle/shortest focus length
Thermal sensitivity
Temperature measurement range
Test and measurement precision
Emissivity
Image capture frequency
Wavelength coverage
Focus mode
Color palette
View option
Storage medium
Storage Image/ Video Format
3.2” full angle TFT display screen
320 × 240
320 × 240
640x480 (300,000 pixel)
27°× 35°/0.5m
0.07°C
-20~300°C (-4°F~572°F)
±2°C or ±2%
Adjustable from 0.01 to 1.0
9 Hz
8-14um
Fixed
Spectra, iron, cool black and white
Full infrared and full vision Visible
image with 25% increments
Built-in 4 GB
JPG/MP4

Image/video export method
Image analysis function
Power supply
USB
Automatic power-off time
Product size (length × width × height
Product Weight
Work temperature
Storage temperature
Relative humidity
3. Performance Index
P. 6
USB connection to computer export
Support oine analysis on PC
Built-in chargeable 18650 lithium
batteries
Micro USB 2.0
Selectable: 5 minutes/20 minutes/ do not
power o automatically
90 mm×105 mm×223 mm
389g
0°C -50°C
-40°C +80°C
< 85％RH
◄ UV ► ◄ Infrared ► ◄ Microwaves ►
0.1
Higher Energy
1
Wavelength (µm)
10
Lower Energy
NIR SWIR MWIR LWIR
0.75µm 1µm 2.7µm 3µm 8µm 14µm5µm
LWIR: thermal infrared
radiation
Wavelength coverage of
thermal infrared radiation
of IR0019
3.2” full angle TFT display screen
320 × 240
320 × 240
640x480 (300,000 pixel)
27°× 35°/0.5m
0.07°C
-20~300°C (-4°F~572°F)
±2°C or ±2%
Adjustable from 0.01 to 1.0
9 Hz
8-14um
Fixed
Spectra, iron, cool black and white
Full infrared and full vision Visible
image with 25% increments
Built-in 4 GB
JPG/MP4

4. Product Features
P. 7
4.1. Physical features
Visible light camera
Infrared imaging sensor
Image capture trigger
Micro USB
4
1
2
3

4. Product Features
P. 8
1. Central point temperature cursor
This pointer will always remain at the centre of the screen and
allow the user to move the camera to identify the temperature of
where they point.
2. Thermal point temperature cursor
This pointer will automatically locate and display the highest
temperature on the screen.
3. Cold point temperature cursor
This pointer will automatically locate and display the lowest
temperature on the screen.
4.2. Key description
Central point temperature
Battery power
Current emissivity
Cold point temperature cursor
Color code
Temperature cursor at central point
Hot point temperature cursor
Time
Maximum /minimum value of field
temperature
2
1
3
4
5
6
7
8
9
12
3
5
76
4
8
9

4. Product Features
P. 9
4.3. Button features
1On/o key
Menu/No key
Select/Yes key
2
3
4Enter key
Navigation key: Up,
down, left and right
5
MENU SELECT ENTER
1 2 3 4
5

5. Initial Operation
P.10
1. Charging: when the battery power is low or empty, please
charge it using the micro USB cable provided.
2. Power on/o the instrument: hold down“ ” key for several
seconds.
3. Change fusion mode: press “ ◄” and “ ►" to switch between
fusion modes which blend thermal images and visible light
images together.
→ The degree of fusion is 0%, 25%, 50%, 75% and 100%.
4. Image capture: press the image capture key, then the screen will
display “store photo?”:
→ If “yes”, please press “MENU”key to save the image.
→ If “no”, press“SELECT” key to determine not to save the image.
5. Show or Hide the bottom bar: press “ ▲” to hide the bottom bar
of the screen which shows the maximum / minimum value and
time of the eld temperature. Press“ ▲” again to display the
bottom bar.
6. Image export: use the Micro USB cable to connect the IR0019 to
a computer to transfer the les.
7. Record video: Long press the image capture button, the screen
will prompt “record video?”, if you select “Yes” at this time, please
press the “ MENU ” button or short press the image capture
button to start recording. Press the“ ENTER ” key or long press the
image capture key to end the recording. If you choose“No”, please
press the “ SELECT ” button to conrm not to record video.

P.11
6. Image Registration
The location of the visible light camera is
above the infrared imaging sensor which is
at the centre of the camera. Together they
produce an image overlay (in between
visible light mode and infrared mode)
which would show the visible light image
over the infrared image just like the left
image below.
The Image Registration
feature helps to adjust
the positions of the
visible light image and
infrared image to make
sure they align.
To access this feature, press the
menu button, then select Image
Registration (see right image
above). Use the arrow keys to
adjust the position of the
images until they align.
Image registration ►
Images ►
Color palette ►
Emissivity ►
Settings ►
Image registration
adjustment mode
Image registration
after adjustment

7. Color Palette
P.12
The menu of color palette can change the false color on the display
screen or capture infrared image. There are ve types of color
palettes provided: spectra, iron, cool, black and white .
Suitable selection of color palette displays the details of the target
objective better:
1. Spectra, iron and cool color
• Focus on display of color
•Suitable for high heat contrast
•Improving the color contrast between high and low
temperature
2. White and black color
•Provide even linear color.
The following is the image of the same object with selection
of dierent color palettes:
Spectra Iron Cool White Black

1. Press “MENU ” to select;
2. Select “color palette”and press “ ►” to enter the color
palette list.
3. Press “▲”and “ ▼” to select color palette.
4. Press “SELECT” to conrm the choice.
5. Press “◄” to return.
6. Press “MENU” to exit from the menu.
8. Application of Color Palette
and Image Check/ Deletion
P.13
8.1. Application of color palette
SPECTRA
IRON
COOL
WHITE
BLACK
Color Palette

8. Application of Color Palette
and Image Check/ Deletion
P.14
8.2. Check images/Delete images
Images
171229-105030
171229-105031
171229-105032
171229-105033
171229-105034
1. Select the images menu and press “ ►” to enter the
image menu
2. Press “▲”/“▼” to adjust the selected items.
3. Press “SELECT” key to view the image.
4. Press “ ◄”/“ ►” to check the previous/next image.
5. Press “ENTER” key to return. Press “MENU” key
to exit.
6. Image deletion: during image checking, press “▲” key and the
deletion mode appears. Press “MENU” key to delete images
or press “SELECT” key to cancel deletion.

9. Measure Objects
P.15
According to the characteristics of the objects and surfaces to be
measured, users may select corresponding measurement modes
or enter “advanced” option to adjust the value of emissivity
(please refer to the table of “emissivity of common materials”).
The operating step is as the following:
1. Select the “measure objects”;
press “ ►” key to enter the
sub-menu.
Measure
Matt (e-0.95)
Semi-matt (e=0.85)
Semi-glossy (e=0.60)
Glossy (e=0.30)
Advanced 0.00
2. Press “ ▲” and “ ▼” to select the emissivity.
3. When the item is chosen, press “SELECT” to conrm.
4. If “self-dened” emissivity is chosen, press “SELECT” key
to enter the edit state.
5. Press “ ◄” and “ ►" keys to select the number to be changed.
6. Press “ ▲” / “ ▼” to adjust the value.
7. Press “SELECT” to conrm after editing.
8. Press “MENU” key to exit.

P.16
10. Emissivity
Emissivity
The emissivity of the surface of a material is its eectiveness in
emitting energy as thermal radiation. The emissivity of the product
can be adjusted from 0.10 to 1.00 with the default value of 0.95. Many
common objects and materials (such as timber, water, skin and
textile fabric) will reect heat energy, so it is easy to obtain high
accuracy as a result.
Choosing the correct setting of the emissivity value of dierent
objects and materials is very important for achieving accurate
temperature measurement. The surface emissivity will greatly aect
the measured temperature and therefore adjusting the emissivity
value to match it is essential.

11. The Table of Emissivity Value
P.17
The product is provided with four types of object measurement
modes:
1. Coarse object (easy to give out energy)(0.95);
2. Semi-matte object (0.80);
3. Semi-shiny object (0.60);
4. Shiny object (0.30);
Substance Thermal Substance Thermal
radiation radiation
Bitumen 0.90-0.98
Concrete 0.94
Cement 0.96
Sand 0.90
Earth 0.92-0.96
Water 0.92-0.96
Ice 0.96-0.98
Snow 0.83
Glass 0.90-0.95
Ceramics 0.90-0.94
Marble 0.94
Gypsum 0.80-0.90
Mortar 0.89-0.91
Brick 0.93-0.96
Black cloth 0.98
Human skin 0.98
Foam 0.75-0.80
Charcoal dust 0.96
Paint 0.80-0.95
Matte paint 0.97
Black rubber 0.94
Plastic 0.85-0.95
Timber 0.90
Paper 0.70-0.94
Chromium 0.81
hemitrioxide
Copper oxide 0.78
Ferric oxide 0.78-0.8
Textile 0.90

P.18
12. Introduction to
“Setting” Sub-menu
Settings
Auto shutdown ►
No
5 min
20 min
Display intensity ►
Low
Medium
High
Language ►
English
Chinese
Italian
German
Unit ►
Celsius
Fahrenheit
Time format ►
24 Hours
AM/PM
Set time ►
Year 2017
Month 12
Day 28
Hour 15
Minute 15
Second 15
Spot ►
On
O
h

P.19
13. Time Setting /
14. Capture Thermal Points
13. Time Setting
1. Press “ ▲”/“ ▼” to select year/month/day/hour/minute.
2. Press “SELECT” to enter edit.
3. Press “ ◄” and “ ►" to select the gure to be changed.
4. Press “ ▲”/“ ▼” to adjust the selected items.
5. After editing, press “ENTER” to conrm.
6. Press left key or “MENU” key to return and complete
the setting.
Set Time
Year
Month
Day
Hour
Minute
Second
2018
9
9
11
33
33
14. Capture Thermal Points
Capture thermal points are the three dierent cursors which measure the
temperatures ( The central, highest and lowest temperature points).
Find the “Spot” under the “setting” menu to enable and disable the
function.