PERFECTPRO SOLOWORKER User manual

SOLOWORKER
Operating instruction
Mode d’emploi
Gebruiksaanwijzing
Bedienungsanleitung
Bruksanvisning
GB
F
NL
D
N
3A81YP6L0000A

1
GB
WARNING!
WARRANTY BECOMES VOID ONCE THE DEVICE
CABINET HAS BEEN OPENED OR ANY MODIFICATIONS
OR ALTERATIONS TO THE ORIGINAL DEVICE HAVE
BEEN MADE

2
Important safety instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet. Consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.

3
GB
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged. liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
To Reduce the Risk of Fire or Electric Shock, Do not
Expose This Appliance To Rain or Moisture.
The Shock Hazard Marking and Associated Graphical
Symbol is provided on the rear of unit.
Excessive sound pressure on ear-and headphones could
impair the hearing ability. Higher setting that idle on the
equalizer leads to higher signal voltages on the output
for ear and headphones.
The power plug should be close to the radio, and easy to
be approached that during the emergency, to disconnect
the power from the radio, just unplug the power plug from
the AC power slot.
Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnected device shall
remain readily operable.
This apparatus is provided with protection against
splashing water (IP64).
Use only the AC/DC adaptor which is provided by the
manufacturer.
The batteries shall not be exposed to excessive heat
such as sunshine, re or the like.
To prevent possible hearing damage, do not listen
at high volume levels for long periods.

4

5
GB
Controls
Headphone socket
Loudspeaker
* 360 DEGREES SOUND
The unique Neodymium speaker located on top of the
radio provides a 360 degrees sound image.
Suggestion: If preferred, place the radio in a corner or
close to a wall for additional sound reection.
LCD display
Volume down
Tuning down button
Menu/Preset button
Power button
Band button
Select/Info button
Tuning up button
Volume up button
Rod antenna
Strap holder
(Note: the strap holder on top of the clip is intended for a
key ring/hook)
Clip
Aux in socket
DC IN socket (micro-USB)
Battery charging LED indicator
Upside indicator for the micro-USB plug
1
2
3
4
5
6
7
8
9
10
11
14
15
16
17
12
13
18

6
Charging the radio
This unit features a built in 1850mAH Lithium rechargeable
battery to power the radio.
Before operating the radio for the first time please fully
charge the battery with a supplied 5V/500 mA AC adaptor.
Carefully insert the mini-usb plug into the DC IN socket on the
rear of your radio. A red dot on the mini-usb plug indicates the
upside of the mini-usb plug. This red dot is also indicated above
the mini-usb socket. Plug the adaptor into a standard mains
outlet and the radio will begin charging the built in battery.
The LED charging indicator next to the DC IN socket will shine
bright red showing charging in progress. This LED indicator will
shine faint when the battery is fully charged. The radio can only
be charged with radio off. Charging time is approx. 4 hours.
The battery life is approx. 4 to 10 hours* listening through
the speaker and approx 6 to 15 hours* with headphones.
Reduced power, distortion, ‘stuttering’ sounds or battery power
indicator in “low” are all signs that the battery needs to be
recharged. Please note that the battery power icon does not
display on the LCD when charging the battery.
IMPORTANT:
The mains adaptor is used as the means of connecting the radio
to the mains supply. The mains socket used for the radio must
remain accessible during normal use. In order to disconnect the
radio from the mains completely, the mains adaptor should be
removed from the mains socket outlet completely.

7
GB
Safety Note:
Never use charge or operate the radio on AC mains power in
rainy or moist conditions to prevent moist from entering the
radio. Always keep the rubber cover on the back well closed
under these conditions.
* Note to battery life:
This is a rough indication only as actual achieved battery
life depends on many factors such as: selected volume,
music type (bass heavy music consumes more energy),
selected music source or radio band, selected EQ settings,
temperature and age of the battery.
Initial operation-DAB
1. Carefully straighten up the rod antenna* and press the
Power button.
2. The display will show “Welcome to Digital Radio” and start
to scan the entire DAB+ channel range and stop at the
rst found station. If the radio has been used before, the
last used station will be selected. Press the Select button
to play the station.
3. Press the Tuning up/down button to display station list and
nd desired station. Press the Select button to select the
station. The radio will tune to the station and display the
station name.
4. Adjust the volume control for comfortable listening.

8
Note:
Due to the conductivity of the human body the reception of
DAB stations may not be possible or become unstable when
the antenna touches your body or is very close to your body.
Service information-DAB
The Service Information display-Technical information on the
current status of the station being broadcast.
While listening to DAB, continually press the Select/Info
button to cycle through information on:
a. Radio text-Displays text messages such as the artist or
track name, phone in number, trafc alerts, etc.
b. Program type (PTY)-Displays the type of station being
listened to such as Pop, Classic, News etc.
c. Multiplex Name-Displays the name of the DAB multiplex
to which the current station belongs as well as its broadcast
frequency.
d. Signal strength-Displays the signal strength for the station
being listened to.
e. Bit rate and audio type-Displays the digital bit rate and
audio coding information for the station being listened to.
f . Date-Displays the current date.

9
GB
Menu functions-DAB
Press and hold the Menu button to enter the menu list. Press
the Tuning up/down button to choose from the following
options: EQ setting/Full scan/Manual tune/DRC value/Station
order/Prune/System.
A) Full scan: scan the whole DAB network in your area. Radio
will tune to the rst station found after the scanning is completed.
B) Manual tune: press the Tuning up/down button to scroll
through the whole DAB channel. Press the Select button
to select required channel.
C) EQ setting: The sound on your radio can be adjusted to
suit your personal taste for the material that you are listening
to. The radio has 5 preset equalizer modes. Alternatively,
you may set the treble and bass levels to your own preferences.
Press the Tuning up/down buttons to cycle through the
preset mode. Press the Select button to conrm your selection.
a) Normal: no tone modication is applied
b) Rock
c) Soul & Jazz
d) Classical
e) Spoken word
f ) Personal: select this mode and you can go to ‘Personal
setup’ to adjust the treble/bass tone.
Personal setup: If you nd the preset equalizer functions not
to your liking, you may set up a custom treble and bass as
following:
1) Follow the step above to enter ’Personal setup’.