Performance Tool W85008 User manual

ROLL AROUND STOOL WITH
PNEUMATIC SEAT
OWNER’S MANUAL
Item Number W85008
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on
the product label and instruction manual prior to operation of stool. The owner/operator shall retain product instructions for
future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and while in use,
maintaining the unit in good working order. If the owner and/or operator are not fluent in English, the product warnings and
instructions shall be read and discussed with the operators’ native language by the purchaser/owner or his designee. Make
sure that the operator comprehends its contents. Safety information shall be emphasized and understood prior to usage. The
stool shall be inspected per the operating instructions.
Users of this stool must fully understand these instructions. Each person operating this stool must also be of sound mind and
body and must not be under the influence of any substance that might impair their vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!

2
SAFETY GUIDELINES / DEFINITIONS
UNPACKING AND INSPECTION
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
Specifications are subject to change without notice.
Capacity: .................................................................................................................................. 300 lbs.
Tool Tray:............................................................................................... 15 in. diameter x 7/8 in. deep
Ram Extension: ............................................................................................................................. 7 in.
Casters:.................................................................................................................................... 2 1/2 in.
Seat:.................................................................................................... 12 in. diameter x 1 5/8 in. deep
1. DO NOT exceed rated capacity. Overloading the stool or tray can
cause damage to or failure of the stool.
2. Use only on hard, level surface capable of sustaining the load. Use of
stool on other than hard level surfaces can result in stool instability.
3. DO NOT stand on stool. Serious injury can result if the tool tips over
or you accidentally come in contact with the stool.
4. DO NOT expose to heat. Parts of the unit are under pressure.
5. Do not alter this product in any way.
6. Keep your work area clean and well lit. Cluttered work areas invite
accidents.
7. Keep bystanders, children, and visitors away while operating stool.
Distractions can cause you to lose control.
8. Stay alert. Watch what you are doing, and use common sense when
operating a stool. Do not use a stool while tired or under the inu-
ence of drugs, alcohol or medication. A moment of inattention while
operating stool may result in serious personal injury.
9. Store idle stool out of reach of children and other untrained persons.
Stools are dangerous in the hands of untrained users.
10. Stool service must be performed only by qualied repair personnel.
Service or maintenance performed by unqualied personnel could
result in a risk of injury.
11. When servicing a stool, use only identical replacement parts - refer
to attached, product-specic parts list and diagram. Follow instruc-
tions in the Care & Maintenance section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may
create a risk of injury and may void any applicable warranty.
12. Maintain labels and nameplates on the stool. These carry important
information. If unreadable or missing, contact Performance Tool for a
replacement.
13. The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur.
The operator must understand that common sense and caution are
factors, which cannot be built into this product, but must be supplied
by the operator.
WARNING: This product and its packaging contain a chemical known to
the State of California to cause cancer, birth defects, or other reproduc-
tive harm.
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or
maintain this stool. Failure to comply with the instructions may result in serious personal injury
and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using this
stool:
WARNING
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS
EQUIPMENT. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURYAND/OR PROPERTY DAMAGE AND
WILL VOID WARRANTY.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps
described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information
available at the time of publication. The manufacturer reserves the right to make product changes at any time without notice.
DANGER Indicates an imminently hazardous situation that, if
not avoided, WILL result in death or serious injury.
WARNING Indicates a potentially hazardous situation that, if
not avoided, COULD result in death or serious injury.
CAUTION Indicates a potentially hazardous situation that, if
not avoided, MAY result in minor or moderate injury.
NOTICE Indicates important information, which if not followed,
MAY cause damage to equipment.
After opening the carton, unpack your stool and related parts & accessories. Please inspect it carefully for any
damage that may have occurred during transit. Please check it against the photograph on carton.
WARNING DO NOT operate this stool if damaged during shipment, handling or misuse. Do not operate the stool until the parts
have been replaced or the fault rectified. Failure to do so may result in serious personal injury or property damage. All damaged parts
must be repaired or replaced as needed prior to operating this stool. Check to see that all nuts, bolts and fittings are secure before
putting this stool into service.
Please have the serial number, model number, and date of purchase available for reference when calling.

3
• Adjustable wrench • Hammer and block of wood or rubber mallet • slotted screwdriver
PACKAGING CONTENTS
PACKAGING CONTENTS
1 Seat Cushion with
Lifting Lever 1
2 Lifting Unit 1
3 Tool Tray Assembly
(5 pc 2 1/2 casters attached) 1
# Description Quantity
2
3
1
1. Loosen fasteners (B).
2. MAKE SURE the tray is on a rm surface with
the wheels down. Insert the lifting unit (C)
into the tool tray hole (E). The bigger end of
the lifting unit (C) is the end that inserts into
the tool tray hole (E). It might be necessary
to seat the lifting unit (C). Do this by holding
a block of wood over the top of the lifting unit
and gently tapping with hammer to seat the
lifting unit. NOTE: It might be easier to position
the tray (D), wheels down, on the grass or a
surface that is not smooth.
3. ATTACH the seat (A) to the lifting unit (C)
4. MAKE SURE all fasteners are tightened (B).
NOTE: It is recommended you take the time to
make sure that the casters (F) are tight.
5. TO RAISE seat, stand next to stool. Lift
handle, and release when seat is at the
desired height.
6. TO LOWER seat, sit on the stool. Lift handle,
and release when the seat is at the desired
height.
ASSEMBLY INSTRUCTIONS
A
B
C
B
D
E
F
Fig. 1

1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal
rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of
warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A
defective product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to
place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®
will replace at no charge any parts which our examination shall disclose to be defective and under warranty. These warranties shall be
valid only when a sales receipt showing the date of purchase accompanies the defective product or defective part(s) being returned.
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal
use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which
has been repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any
product or part which has been subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its
products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied
warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability
and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household
use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise
applicable, an implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above. The laws on limitation of implied warranties may differ from state to state, so the above limitations
may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to
any product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be
the repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special
damages may vary from state to state, so the above limitations may not apply in all cases.
Check out the collection of garage accessories we offer.