Performance Tool W89719 User manual

DIGITAL LASER TACHOMETER
OWNER'S MANUAL
Stock Number W89719
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained
on the product label and instruction manual prior to operation of this hose reel. The owner/operator shall retain product
instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and while in use,
maintaining the unit in good working order. If the owner and/or operator are not fluent in English, the product warnings
and instructions shall be read and discussed with the operators’ native language by the purchaser/owner or his
designee. Make sure that the operator comprehends its contents. Safety information shall be emphasized and
understood prior to usage.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
On occasion, after printing of our literature is completed, our manufacturers may make changes and/or modifications to merchandise which will not be reflected in
this manual. Although we strive to maintain complete and accurate information, it is possible in some instances, that the product may differ slightly from printed
specifications. Illustrations are intended for reference only. Actual merchandise may vary. Wilmar is not responsible for typographical errors.
Please read these instructions carefully and retain them for future use.
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail
purchasers. These warranties give specific legal rights. Except where prohibited by local law, the
law of the State of Washington governs all warranties and all exclusions and limitations of
warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and
workmanship under normal use and service. A defective product may be returned for a free
replacement within 90 days from the date of purchase, provided that product is returned to place of
purchase immediately after discovery of defect. After 90 days and up to one year from date of
purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination
shall disclose to be defective and under warranty. These warranties shall be valid only when a
sales receipt showing the date of purchase accompanies the defective product or defective part(s)
being returned. For part(s) after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables
which must be replaced under normal use and service. These warranties shall not apply to any
product or part which is used for a purpose for which it is not designed, or which has been repaired
or altered in any way so as to affect adversely its performance or reliability, nor shall these
warranties apply to any product or part which has been subject to misuse, neglect, accident or
wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume
any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE
TOOL® makes no express or implied warranties of any kind with respect to its products. In
particular, PERFORMANCE TOOL® makes no implied warranty of merchantability and no implied
warranty of fitness for any particular purpose, except that for goods purchased primarily for
personal, family or household use and not for commercial or business use, PERFORMANCE
TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied
warranty of fitness for a particular purpose), but only for the particular qualities or characteristics,
and for the duration, expressly warranted above. The laws on limitation of implied warranties may
differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages
resulting from or in any manner related to any product, or to the design, use, or any inability to use
the product. The sole and exclusive remedy for a defective product or part shall be the repair, or
replacement thereof as provided above. The laws on limitation of remedies or on consequential,
incidental or special damages may vary from state to state, so the above limitations may not apply
in all cases.
© Copyright 2017 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138

• This device adopts the anti-interference technology, photoelectric technology, semiconductor
laser technology and microcomputer (CPU) technology to achieve the function of non-contact
rotation speed measurement.
• It features wide measuring range and high resolution.
• With ultra-big LCD display, it provides clear reading without parallax.
• It can automatically save the measured max value, minimum value and the last display value
• It is powered with one 9V battery, and benets long time and continuous working due to its
better energy saving performance.
• When the power voltage is lower than the regulated value, it problems with the mark of battery.
• It is designed with streamline appearance, the whole device adopts durable and quality elec-
tronic components, and the housing adopts light and solid ABS, and features longer service life.
LCD Display: 5-digit 18mm high LCD
Power Supply: Single 6F22 9V battery
Time Base: 6MHz quartz crystal oscillator
Range Selecting: Automatic switching
Testing Range: 2.5rpm-9999 rpm(revolutions per minute)
Resolving Power: 0.1 rpm(revolutions per minute) (2.5 39999.99 rpm)
1 rpm(revolutions per minute) (over1000 rpm)
Measuring Accuracy: ±(0.05%+1 character)
Sampling Time: 0.8s (over 60rpm)
Effective Measuring Distance: 50mm-20mm (LED light source)
50mm-500mm (laser light source)
Instrument Dimension: 131*70*29mm
Power Consumption: About 35mA
Portable Fabric Bag: 1
Operation Manual: 1
Battery: 6F22 9V
Reecting Belt Length: 24 in.
1. Reection Mark
2. Light Path
3. Memory Button
4. Measurement Button
5. LCD Display
6. Battery Chamber Cover
This tool is capable of the following:
• Rotating speed test, counting test
• Max, minimum and average rotating speed test
• The test data is saved automatically, (save 63 data)
• Counting range: 0-99999.0
WARNING: Do not directly shine the eyes of human or
animal with the light bean transmitted from the device
for avoiding hurt to the eye.
SPECIFICATIONS
PRODUCT FEATURES
CONTROLS AND FUNCTION
OPERATION
1
2
3
4
5
6
Test Function Mode
1. Rotating speed test mode selection and measurement
a. Open the battery chamber, install the battery, then install the cover.
b. Hold the MEM button, LCD displays RPM or COUNT character, select the required RPM test
mode, release the MEM button.
c. Hold the TEST button to enter into test state.
d. After stopping test, LCD displays the last test data for 10s, and then the instrument is turned off.
2. Count test mode selection
a. Open the battery chamber, install the battery, then install the cover.
b. Hold the MEM button, LCD displays RPM or COUNT character, select the COUNT test mode,
release the MEM button.
c. Hold the COUNT button to enter into count test state.
d. After stopping test, LCD displays the last test data for 10s, and then the instrument is turned off.
MEM Record Data Function Switching
1. Hold the MEM button, LCD displays RPM or COUNT character, select the desired mode,
release the MEM button.
2. Saved data browse
a. Press the MEN button for the rst time, LED displays the actual data of the last test.
b. Press the MEN button again, LED displays “1” which means the last test data, and circularly
display the MAX, MIN and AVE data of the test.
Rotating Speed
Max Value
Minimum Value
Last Display Value
Time
Max Value
Minimum Value
Last Display Value
Fig. 1
For Example: