Perlick H50IMS-L User manual

MODELS:
H50IMS-R
H50IMS-L
H50IMW
H50IMS-ADL
H50IMS-ADR
H50IMW-AD
PERLICK
SELF-CONTAINED ICE MAKER
PRODUCT MANUAL
Issued: 11-2-2009

2
IMPORTANT
This manual should be read carefully before the icemaker is installed and
operated. Only qualied service technicians should install, service, and
maintain the icemaker. Read the warnings contained in this booklet carefully as
they give important information regarding safety. Please retain this booklet for
any further reference that may be necessary.
CONTENTS
Important Safety Information ................................................................................................. 3
I. Specications ..................................................................................................................... 4
A. Construction .................................................................................................................. 4
B. Nameplate Rating ......................................................................................................... 5
C. Dimensions/Connections .............................................................................................. 6
1. H50IMS-R, H-50IMS-L ............................................................................................. 6
2. H50IMW ................................................................................................................... 7
3. H50IMS-ADL, H50IMS-ADR .................................................................................... 8
4. H50IMW-AD ............................................................................................................. 9
II. Installation and Operating Instructions ............................................................................ 10
A. Checks Before Installation .......................................................................................... 10
B. Location ...................................................................................................................... 10
1. General .................................................................................................................. 10
2. Built-In Installation Site ........................................................................................... 11
C. Door Overlay Panel Fabrication and Attachment (H50IMW, H50IMW-AD) ................ 12
D. Setup .......................................................................................................................... 20
E. Electrical Connection .................................................................................................. 20
F. Water Supply and Drain Connections ......................................................................... 21
G. Final Checklist ........................................................................................................... 22
H. Startup ........................................................................................................................ 23
III. Cleaning and Maintenance ............................................................................................. 24
A. Cleaning and Sanitizing Instructions ........................................................................... 24
1. Cleaning Solution ................................................................................................... 24
2. Cleaning Procedure ............................................................................................... 24
3. Sanitizing Solution .................................................................................................. 26
4. Sanitizing Procedure .............................................................................................. 26
B. Maintenance ............................................................................................................... 29
C. Preparing the Icemaker for Long Storage .................................................................. 30

3
Important Safety Information
Throughout this manual, notices appear to bring your attention to situations which could
result in death, serious injury, or damage to the unit.
WARNING Indicates a hazardous situation which could result in death or
serious injury.
CAUTION Indicates a situation which could result in damage to the unit.
IMPORTANT Indicates important information about the use and care of the
unit.
WARNING
This icemaker should be destined only to the use for which it has been
expressly conceived. Any other use should be considered improper and
therefore dangerous. The manufacturer cannot be held responsible for
eventual damage caused by improper, incorrect, and unreasonable use.
To reduce the risk of death, electric shock, serious injury, or re, follow
basic precautions including the following:
• This unit requires an independent power supply. See the nameplate for
proper voltage and breaker/fuse size. Failure to use a proper breaker or fuse
can result in a tripped breaker, blown fuse, or damage to existing wiring. This
could lead to heat generation or re.
• THIS APPLIANCE MUST BE GROUNDED: This unit is equipped with a
3-prong grounding plug to reduce the risk of potential shock hazards. It
must be plugged into a properly grounded, independent wall outlet. If the
outlet is a 2-prong outlet, it is your personal responsibility to have a qualied
electrician replace it with a properly grounded, independent 3-prong wall
outlet. Do not remove the ground prong from the power cord and do not use
an adapter plug.
• Do not use an extension cord.
• Make sure the control switch is in the "OFF" position before plugging in or
unplugging the unit to reduce the risk of electric shock.
• Do not use a unit with a damaged power cord. The power cord should not be
altered, jerked, bundled, weighed down, pinched, or tangled. Such actions
could result in electric shock or re. To unplug the unit, be sure to pull the
plug, not the cord, and do not jerk the cord.
• To reduce the risk of electric shock, do not touch the plug or control switch
with damp hands.
• This unit should be disassembled or repaired only by qualied service
personnel to reduce the risk of electric shock, injury, or re.
• Do not make any alterations to the unit. Alterations could result in electric
shock, injury, re, or damage to the unit.

4
I. Specications
A. Construction
Top Panel
Ice Making
Mechanism
Scoop Holder
Front Panel
Control Switch
Louver
Bin Control
Thermostat
Bulb
Slope
Magnet
Catch
Door
Power Cord

5
PERLICK ICE MAKER
MODEL NUMBER H50IMS-R
SERIAL NUMBER
AC SUPPLY VOLTAGE 115-120/60/1
AMPERES 3.4 AMPS
DESIGN PRESSURE HI-240PSI LO-120PSI
REFRIGERANT 134a 4.2 oz.
B. Nameplate Rating
See the nameplate for electrical and refrigeration specications. This nameplate is located
inside the bin on the right side.
We reserve the right to make changes in specications and design without prior notice.
Note: Only the "MODEL NUMBER" is replaced for other models.
MOTOR-COMPRESSOR THERMALLY PROTECTED
APPROVED FOR OUTDOOR USE
Perlick Corp.
Milwaukee, WI 53223
www.bringperlickhome.com
ICE MAKER
946Z

6
Units: mm [in.]
C. Dimensions/Connections
1. H50IMS-R, H-50IMS-L

7
2. H50IMW
Units: mm [in.]

8
3. H50IMS-ADL, H50IMS-ADR
Units: mm [in.]

9
4. H50IMW-AD
Units: mm [in.]

10
II. Installation and Operating Instructions
WARNING
1. This icemaker must be installed in accordance with applicable national,
state, and local regulations.
2. CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews
are securely in place after installation. Make sure that none have fallen into
the storage bin.
A. Checks Before Installation
• Visually inspect the exterior of the shipping container and immediately report any
damage to the carrier. Upon opening the container, any concealed damage should also
be immediately reported to the carrier.
• Remove the shipping carton, tape, and packing material. If any are left in the icemaker,
it will not work properly.
• Remove the package containing the accessories.
• Remove the protective plastic lm from the panels. If the icemaker is exposed to the
sun or to heat, remove the lm after the icemaker cools.
• See the nameplate inside the bin on the right side, and check that your voltage
supplied corresponds with the voltage specied on the nameplate.
B. Location
1. General
This icemaker is approved for indoor or outdoor use.
CAUTION
1. Normal operating ambient temperature should be within 45°F to 100°F (7°C
to 38°C); Normal operating water temperature should be within 45°F to 95°F
(7°C to 35°C). Operation of the icemaker, for extended periods, outside of
these normal temperature ranges may affect icemaker performance.
2. This icemaker will not work at sub-freezing temperatures. To prevent
damage to the water supply line, drain the icemaker if the air temperature is
going to go below 32°F (0°C). See "III.C. Preparing the Icemaker for Long
Storage."
For best operating results:
• The icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• The location should provide a rm foundation for the icemaker.
• This icemaker requires no side or top clearance. But allow enough space at rear for
water supply and drain connections and at least 15" (38 cm) clearance at front.