Pet Gear PG4625SCC User manual

INSTRUCTION MANUAL
PRO PAWTY FOR CATS
™
PG4625SCC/PG4625ESC
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[e-mail]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™

PET GEAR PRO PAWTY FOR CATS•PG4625SCC/PG4625ESC 2
PARTS LIST
CRATE SET UP
Step 1. Open both sides of wire frame. Step 2. Insert wire into
connector near the center
of front and back sides.
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
LITTERTRAX MATCRATE
Step 3. Velcro inner panel to
support wire and velcro all tabs
along sides to secure cover
to the frame.
Step 5. Unzip door to acess litter box
for easy cleaning.
Step 4. Place Pro Pawty on
littertrax mat.
Support
Wire
Inner
Panel

PG4625SCC/PG4625ESC 3
AVOIDING SUFFOCATION HAZARDS
SETTING UP THE CRATE
purpose. They can cause suffocation. This product is not intended for commercial use.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
Be sure the crate is completely set up before use.
Always follow the instructions in the product instructions to set up the crate.
Before each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges.
Do not use the crate if any parts are missing or broken.
Call PET GEAR at 1-877-752-9123 for replacement parts. Use only PET GEAR replacement parts.
Visit our website www.petgearinc.com to view or download the product instructions.
Do not substitute parts.
WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew
or paw aggressively. Do not leave your pet unattended.
PET GEAR is not liable for any damage caused
Failure to follow these warnings and the instructions could result in serious injury or death.
PET GEAR PRO PAWTY FOR CATS•
REPLACEMENT PARTS
PET GEAR
Please have your model number ready before calling.
http://www.petgearinc.com/main.asp?sel=2
Use only replacement parts.
You can also request parts:
192 Sheldon Avenue • West Rutland, VT 05777 • 877-752-9123 • www.petgearinc.com
TIPS FOR GETTING CATS TO USE PRO PAWTY
Once the Pro Pawty is assembled you may want to leave the front door unzipped for a day or two, just to
make sure your cat knows where their litter box is. After the cat uses the litter box inside the Pro Pawty
a few times, they should be comfortable using it and the zippered door can be closed.