Petmate Precision XL Superior Construction Chicken... User manual

MADE IN CHINA
P.O. BOX 1246, ARLINGTON, TX 76004-1246
WWW.PETMATE.COM • 1-877-738-6283
©DOSKOCIL MANUFACTURING COMPANY, INC 2020 • PET3481
Coop Wood Care: The wood on this product is unstained so that it may be customized. Wood protection is
highly recommended to extend the life of the product. Recommended wood protection would be a non-toxic
clear coat sealer, stain or paint. Stain or paint needed will vary based on application. On average, coop will take
1-quart of paint or stain.
Cleaning Instruction: Clean with water and mild soap. Avoid harsh detergents. Dry completely.
Coop Anchoring: Coops, like all small outdoor sheds or structures, can be moved by heavy winds and storms.
To provide additional stability to your coop, use techniques recommended for outdoors sheds.
Additional Tips to Increase Predator Resistance:
• If allowing chickens to free-range during the day, always make sure they are secured in the coop at night.
• Install hardware cloth around the bottom of coop to protect against digging predators.
• Use food concealing feeders to protect against rats and mice.
Contact Us:
If you have any questions regarding your chicken coop, please feel free to contact our Customer Service
Department at 1-877-PETMATE. We will be happy to assist you.
If you suspect a defect in material or workmanship, call our toll-free telephone number, 1-877-PETMATE or write to
Doskocil Manufacturing Company, Inc., Customer Service, P.O. Box 1246, Arlington, Texas USA 76004-1246 to
report defect to a customer service representative.
CARE TIPS
WARNING:
Do not climb on the unit.
Children should not be allowed in, on or around the unit without proper supervision.
If any structural component is discovered to be broken or missing, stop the use of the product immediately.
Check hardware periodically to ensure screw/bolt tightness and security.
Keep coop in safe area away from high winds and extreme temperatures.
Never use heating lamps for risk of fire.
Additional Structural Support:
Some people prefer to move their coop around the yard
rather than keeping it in a permanent location. To help
provide structural support, additional wood framing can be
added to the coop with a few cuts of wood.
The framing of the coop at the base is 98.25” long by 52”
wide. Cut down wood framing to this size (while accounting
for the wood framing thickness) and screw or nail together.
This can be affixed to the wood framing of the coop to add
additional structural support.
THIS BOX CONTAINS THESE PARTS:
READ BEFORE ASSEMBLING: This wood on this product is unstained so that it may be customized.Wood protection is highly recommended to
extend the life of the product. Recommended wood protection would be a non-toxic clear coat sealer, stain or paint.
We recommend treating the wood before assembly in a highly ventilated area.
As an unstained product, there will be natural variation in the wood.This includes small imperfections or knots.
FASTENERS
Contains one extra of each screw.
SCREWS
3.5x60mm
(Qty. 23)
AB
SCREWS
3.5x40mm
(Qty. 9)
C
SCREWS
3.5x25mm
(Qty. 4)
D
SCREWS
3.0x16mm
(Qty. 2)
E
PLASTIC
WASHER
(Qty. 8)
2a
FRONT PANEL
11
ROOSTING AREA
ROOSTING BAR
Go to
petmate.com/coop-instructions
or
For coop assembly video.
ROOSTING AREA PANELS FORAGING AREA PANELS
1a
FRONT PANEL
2b
BACK PANEL
1b
LEFT PANEL
1c
BACK PANEL
1d
RIGHT PANEL
2c
RIGHT PANEL
3
NESTING BOX
FLOOR SUPPORT
4
RAMP
5
CLEANING TRAY
NESTING BOX
6a
NESTING
BOX FLOOR
6b
DIVIDER
12
FORAGING AREA
ROOSTING BAR
7
LOWER LEFT
ROOF PANEL
8
UPPER LEFT
ROOF PANEL
9
UPPER RIGHT
ROOF PANEL
10
ROOF CAP
98.25” 52”
CHICKEN COOP
SUPERIOR CONSTRUCTION

*Use Screwdriver for Assembly
Assembly Instructions
3
5
6
1
1. Connect Roosting Area Panels (1a, 1b, 1c, 1d) with Screws (A).
Attach Nesting Box Floor Support (3) with Screws (A-On Front, B-On Back).
Attach Ramp (4) with Screws (D).
2
2. Connect Foraging Area Panels (2a, 2b, 2c) with Screws (A).
3. Connect Foraging Area Panels (2a, 2b) to Roosting
Area Panels (1a,1c) with Screws (A).
4
4. Insert Nesting Box Floor (6a) and Dividers (6b) into Roosting Area of coop.
Insert Roosting Area Roosting Bars (11).
Insert Foraging Area Roosting Bar (12).
Insert Cleaning Tray (5).
5. Attach Lower Left Roof Panel (7) with Screws (B) and Plastic
Washers (E). Attach Upper Left and Right Roof Panels (8 & 9)
with Screws (B) and Plastic Washers (E).
6. Attach Roof Cap (10) with Screws (C).