Petoneer AOE010 User manual

www.petoneer.comPrecautions1. This product is not waterproof, NEVER wash directly into the water;2. DO NOT replace the battery or disassemble it yourself;3. DO NOT block the air outlet and keep proper ventilation;4. If kids are using the product, be sure the guidance of an adult is present;5. Mode I is recommended to use ONLY in the environment where no human or pet is present. Specication
Model: AOE010Size: 3.92x2.04x1.63 inches (99.6x51.7x41.5mm)Weight: 5.4 oz (153 g)Battery: Lithium 2200 mAhWorking modes: Triggered by timing or InfraredInfrared Detection Range: about 1 meter or 3.3 feet
6. Charging
Remove the eliminator and connect thepower supply for charging which takesabout 3 hours.
Warranty TermsWithin the period of warranty, if the product failswith no fault of user operations, it will be repairedat Petoneer's expense. Product failure in examplesbelow will not be covered by the warranty:1). Intentional damage to product by user or third party2). Failure to operate or maintain the product in accordance with the Quick Installation Guide (QIG) instructions.3). Failure by natural wear and tear including but not limited to scratching, corrosion, oxidation and rusting.4). Failure by non-authorized repair of the product including but not limited to user's own or third-party repairing attempts or modifications.（All Pictures shown in the manual are for illustrationpurpose only. Actual product may vary due toproduct enhancement. ）Model：AOE010Smart Odor EliminatorUser Manual
（Please read this manual carefully before using. Keep the manual in a safe place for future reference.）

1. Paste the metal plate onto the foam sticker and attach the sticker to the position you expect.2. For closed cat toilet: Stick the foam sticker onto the cat toilet hood; For open cat toilet: Stick the foam sticker onto the wall near the cat toilet (about 5cm above the cat toilet); For other scenarios, place the device closer to the odor source.4. The eliminator can be mounted onto the metal plate. Operations:5. Select the working mode: Switch from OFF to your desired mode.3. Press firmly onto the metal plate to secure it.3M Inside the boxSmart OdorEliminatorMicro USB CableMeet your odor eliminatorHow it works：The Built-in ozone generator convertsO2 in the air to O3. O3 which has active oxidizingproperties, which can, at the source in the cat toilet,decompose the odor molecules and re-convert it intoharmless. It can also destroy the cell membranestructure of bacteria and has a certain sterilizationeffect.Metal PlateSticker Ozone Emitting HolesInfrared SensorStatus LEDBattery Status LED
（Solid Blue: Working Slow Blinking Blue: Triggered by timer(Mode II) Off: Standby）
（ Solid Red: Battery charging process Solid Green: Battery is fully charged）
OFFOFF（The eliminator is switched off.）Mode II
（Timing Mode with Infrared sensor enabled: after the infrared sensor gets triggered, it releases ozone after 1 minute.）
Mode IMicro USB Port3M
Foam Sticker
（Timing Mode: release ozone once every interval.）
貓廁
cat toilet cat toilet