Petwant PF-103 User manual

V1.0
INSTRUCTION
Medium capacity
automatic pet feeder
Medium capacity
automatic pet feeder
Medium capacity
automatic pet feeder

Operation Panel
SD slot
Camera
Food outlet
Power input
Power switch
Battery Compartment
Food tray
Lock
Description / Introduction (frontage)

APP Installation
Attention
Method one: Scan the above QR code to enter the download
page to install APP according to the guidance.
Method two: Iphone users search“petwant”in APP Store for
APP Installation while Android users search“petwant”in
“ Google Play” for APP Installation
1. It’s recommended to use QR codes scanner or browser scanner to scan
the QR code to enter the download page for APP installation.
2. If download barrier happens when scan QR codes in Wechat, please click
the icon on the top right corner and choose “broswer”to open the
download page.
2. Please note that allow APP to get the location information and network
access to calibrate the current time when install APP.

Log in
Method one: Enter the installed“Petwant”APP , and click
“register”to apply for an account.
Method two: Log in through the third party authorization.

Equipment connection prepare
Plug in and turn on the switch at the bottom of the base, then long
press“SET”button on the panel after the power indicator is on,
and release it until LINK indicator starts flashing and a sound like
“ Dingdong” comes out. ( Please be sure phone have been
connected to wifi and network is good ）

WLAN connection ( Android）
Login“petwant”APP with applied account when mobile phone is
connected to WiFi. Then click“Next”to enter WiFi connection
interface, account will be generated automatically (when the mobile
phone is connected to WiFi, account will be generated), input WiFi
password and click“next”.

WLAN connection ( IOS）
Login “petwant”APP with applied account when mobile phone is
connected to WiFi. Then click“Next”to enter WiFi connection
interface, account will be generated automatically (when the mobile
phone is connected to WiFi, account will be generated), input WiFi
password and click“next”to enter WIFI setup interface and select
WiFi name contains“PETWANT_XXXXXX”, return to the APP
after connection is done then click Next.

Equipment connection succeeds
The time it will take for the connection is different according to the
network environment. Click“Done”to enter APP interface after
connection succeeds.

More settingsPet information
Video function
Automatic
feeding
setting
Manual
feeding
setting
Feeding setting
Pet information

Video function
Click“Video”to enter the corresponding operation interface.
Images, monitoring, Video fold, video recording, photographing
settings can all be achieved.