PFT ZARGOMAT pro User manual

Inhaltsverzeichnis
2019-02-14
Operating manual
PFT ZARGOMAT pro
Safety - Overview - Operation - Spare parts lists
Article number of the operating manual: 00 65 69 5
Article number PFT ZARGOMAT pro DN25- 60°: 00 42 00 58
Read the operating manual prior to starting any wor !

2 2019-02-14
© Knauf PFT GmbH & Co. KG
P.O. Box no. 60 97 4 Iphofen
Einersheimer Straße 5 97 46 Iphofen
Germany
Phone [phone]
Fax [phone]
Technical hotline [phone]
[email protected]
www.pft.net

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Inhaltsverzeichnis
2019-02-14
1 Inspection ..................................................... 5
1.1 Inspection by machine operator .......... 5
1.2 Periodic inspection .............................. 5
2 General information ..................................... 6
2.1 Information regarding the operating
manual ................................................. 6
2.2 Information on the safety
instructions........................................... 6
2. Keep the manual for later use ............. 6
3 Symbol explanation ..................................... 6
.1 Limitation of liability ............................. 7
.2 Copyright protection ............................ 8
. Spare parts .......................................... 8
.4 Customer service ................................. 8
4 Safety ............................................................ 9
4.1 Operator responsibility ......................... 9
5 Operating personnel .................................. 10
5.1 Requirements .................................... 10
5.2 Unauthorised individuals ................... 11
6 Proper use of the ZARGOMAT pro ........... 11
6.1 Personal safety equipment ................ 12
6.2 Special dangers ................................. 14
7 Safety devices ............................................ 16
7.1 Dealing with dangerous situations
and accidents..................................... 16
7.2 Signs .................................................. 17
8 Technical data PFT ZARGOMAT pro ....... 17
8.1 General information ........................... 17
8.2 Connection......................................... 17
8. Operating conditions .......................... 17
9 Sound power level ..................................... 17
10 Vibrations ................................................... 17
11 Decorative plaster attachment glue gun . 18
12 Recommended accessories ..................... 18
13 Overview ZARGOMAT pro with hose
cpl. ............................................................... 19
1 .1 Overview article number 00420058 ... 19
14 Transport, pac aging and storage ........... 20
14.1 Safety instructions for transport ......... 20
14.2 Transport checklist ............................. 20
15 Pac aging .................................................... 20
16 Operation ..................................................... 21
16.1 Safety ................................................. 21
17 Commissioning........................................... 22
17.1 Preparing the mortar hoses................ 22
17.2 Connecting the PFT ZARGOMAT
pro ...................................................... 2
18 Applying mortar .......................................... 23
18.1 Unlock locking lever ........................... 2
19 Interruption of wor ................................... 24
20 Cleaning PFT ZARGOMAT pro .................. 24
20.1 Cleaning the mortar hose ................... 24
20.2 Disassemble sprayer for cleaning ...... 25
20. Cleaning the mortar hose ................... 26
21 Cleaning end ............................................... 26
22 Maintenance ................................................ 27
22.1 Maintenance plan ............................... 27
23 Disassembly................................................ 28
2 .1 Safety ................................................. 28
2 .2 Disassembly ....................................... 29
24 Disposal ....................................................... 29
25 Spare parts drawing, spare parts list ....... 30
25.1 Spare parts drawing ZARGOMAT
pro Article no. 00420058 .................... 0
25.2 Spare parts list ZARGOMAT pro
Article no. 00420058 .......................... 0
25. PFT ZARGOMAT pro Article no.
0042006 ........................................... 1

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Inhaltsverzeichnis
4 2019-02-14
25.4 Spare part drawing ZARGOMAT pro
without mortar hose Article no.
0042006 ........................................... 2
25.5 Spare parts list ZARGOMAT pro
without mortar hose Article no.
0042006 ...........................................
26 Index............................................................ 34

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Inspection
2019-02-14 5
1 Inspection
1.1 Inspection by machine operator
 Prior to each shift, the machine operator has to examine the effectiveness of the
control and safety devices, as well as the proper fitting of the protection devices.
 The safe working condition of construction machinery has to be checked by the
machine operator during operation.
 If the safety devices show any defects or if any other defects are detected that
compromise a safe operation, the supervisor has to be informed immediately.
 In case of defects that cause harm to persons, the operation of the construction
machine has to be stopped to eliminate the defects.
1.2 Periodic inspection
 Construction machinery has to be inspected for their safe working condition in
accordance with the operating conditions and the operational requirements as
needed, however at least once a year by an expert.
 Pressure vessels have to undergo the prescribed expert inspections.
 The inspection results have to be documented and kept at least until the next
inspection.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
General information
6 2019-02-14
2 General information
2.1 Information regarding the operating manual
 This manual provides important information and instructions on
the correct use of the equipment. Adherence to all defined safety
and handling instructions is a prerequisite for a safe working
environment.
 Additionally, the on-site accident prevention regulations and
general safety guidelines for the equipment must be followed at all
times.
 Read the manual carefully before starting any work! It is an integral
part of the product and must be kept near the machine and
accessible to operators at all times.
 Always include the operating manual when transferring the
machine to third parties.
 The diagrams and illustrations shown in the manual are intended
for better understanding of tasks and descriptions. They are not
necessarily shown to the correct scale and may vary slightly from
the actual equipment used.
2.2 Information on the safety instructions
These safety instructions provide important information on how to
operate the unit. Precondition for safe working is compliance with
all safety instructions and instructions given.
2.3 Keep the manual for later use
The operating manual must be available during the entire
service life of the product.
3 Symbol explanation
Warning symbols Warnings are shown by symbols in this manual. The warnings
themselves open with signal words that express the seriousness of
the danger.
Adhere to these warnings at all times to avoid accidents, personal
injury and equipment damage.
DANGER!
Indicates a dangerous situation that will lead to
death or serious injury if it is ignored.
WARNING!
Indicates the possibility of a dangerous situation
that could lead to death or serious injury if it is
ignored.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Symbol explanation
2019-02-14 7
CAUTION!
Indicates the possibility of a dangerous situation
that could lead to non-serious injury if it is ignored.
CAUTION!
Indicates the possibility of a dangerous situation
that could lead to material damage if it is ignored.
Tips and recommendations
NOTE!
Contains useful tips and recommendations, plus
further information on efficient and problem-free
operation.
Special safety instructions The following symbols are used in conjunction with safety
instructions in order to illustrate certain types of danger.
DANGER!
Danger of death due to electric current!
Indicates a potentially life-threatening situation
caused by electricity in the affected area. Non-
compliance with the safety instruction could lead to
death or serious injury.
Work on electrical systems may only be carried out
by specialist electricians.
3.1 Limitation of liability
All specifications and instructions in this manual have been compiled according to the currently valid norms
and instructions, up-to-date technology and our many years of experience in the branch.
The manufacturer accepts no liability for damages caused under
the following conditions:
 Non-compliance with the manual
 Improper operation
 Operation by untrained personnel
 Unauthorised rebuilding
 Technical changes
 Use of unauthorised spare parts
The actual scope of delivery may vary from the explanations and
diagrams detailed here due to special models, additional order
options and technological changes.
Additionally, the obligations defined in the delivery contract, the
general terms and conditions, the delivery requirements of the
manufacturer and the valid regulations at the time of contract
conclusion all apply.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Symbol explanation
8 2019-02-14
3.2 Copyright protection
Keep the manual and its contents confidential. It is only to be used
by personnel who actively use the machine. Forwarding of the
manual to third-parties without prior written permission from the
manufacturer is not permitted.
NOTE!
The specifications, text, illustrations, pictures and
other representations within the manual are
copyright protected and are sub ect to business
copyright laws. Misuse of the manual is a criminal
offence.
All forms of reproduction – both in whole and in part – plus the
utilisation or publication of the manual contents are not permitted
without prior written approval by the manufacturer. Violation of
these terms can lead to claims for compensation. We reserve all
other further rights.
3.3 Spare parts
WARNING!
Danger of injury due to incorrect spare parts!
Incorrect or defective spare parts can lead to
damage, improper functionality or complete system
breakdowns. They can also negatively affect
system safety.
Therefore:
 Only use original spare parts from the
manufacturer.
Only purchase spare parts from approved dealers.
3.4 Customer service
Our customer hotline is available in case of technical queries.
Information on the respective contact partners can be found by
telephone, fax, e-mail or on the Internet. The address of the
manufacturer can be found on page 2.
Our employees are always happy to receive new information
resulting from practical operation. This information may be used for
future product improvements.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Safety
2019-02-14 9
4 Safety
This section provides an overview of all important safety aspects.
These offer optimal levels of safety for personnel and safe and
problem-free operation.
Significant danger may result from non-compliance with the
operating steps and safety instructions detailed in this manual.
4.1 Operator responsibility
The equipment is intended for business use. The operator is then
subject to legal work safety obligations.
Apart from the work safety instructions detailed in this manual, all
valid safety, accident prevention and environmental protection
guidelines for the equipment must be adhered to. This especially
applies to the following:
 The operator must be aware of the valid work safety
regulations. They are also responsible for determining
additional dangers resulting from the individual working
conditions on the operating site. These additional dangers must
be summarised as operational instructions for the correct use of
the equipment.
 During the entire operation time of the equipment, the operator
is responsible for coordinating their instructions with the current
operational status and adjusting them as required.
 The operator is responsible for clearly allocating and defining
the responsible parties for installation, operation, maintenance
and cleaning.
 The operator must ensure that all persons employed with the
equipment have read and understood the manual.
Additionally, the operator must also carry out regular employee
training and inform them of the dangers associated with
equipment use.
The operator is also responsible for the technical functionality and
condition of the equipment. The following rules apply here:
 The operator must make sure that the maintenance intervals
detailed in the manual are adhered to.
 The operator must have all safety devices regularly checked for
functionality and completeness.
 The operator must provide personnel with the necessary safety
equipment.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Operating personnel
10 2019-02-14
5 Operating personnel
5.1 Requirements
WARNING!
Danger of injury due to insufficient training and
qualifications!
Improper use of the equipment can lead to serious
personal injury and material damage.
Therefore:
– Only have certain tasks carried out by the
responsible persons detailed in the individual
chapters of this manual.
– Contact specialists in case of doubt.
The following qualifications are specified for various tasks within
this manual:
 Authorised personnel
Instructed by the operator on tasks and the possible dangers of
improper operation.
 Specialists
Due to their professional qualifications, experience and
knowledge of the system, specialists are able to work
independently and recognise possible dangers without special
instructions.
 Electricians
Due to their professional qualifications, experience and
knowledge of system standards, electricians are able to work
independently on electrical systems and recognise possible
dangers without special instructions.
Electricians are specially trained for the work environment in
question and are aware of the relevant standards and
instructions.
Only persons that carry out their work responsibly are permitted to
work with the system. Persons with impaired reactions (e.g. due to
drugs, alcohol or medication) are not permitted.
Observe the specific business and age regulations when selecting
personnel on-site.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Proper use of the ZARGOMAT pro
2019-02-14 11
5.2 Unauthorised individuals
WARNING! Unauthorised individuals are put at
ris !
Unauthorised individuals that do not fulfil the
requirements here are not fully aware of the
dangers in the work area.
Therefore:
 Keep unauthorised individuals away from the
work area.
 In case of doubt, ask the persons involved and
guide them away from the work area.
 Stop operation as long as unauthorised
individuals are found within the work area.
6 Proper use of the ZARGOMAT pro
The system is only intended for use under the conditions
detailed below
 Casting of frames.
 Application of adhesive mortar on boards for thermal
insulation composite system.
 Renovation of quarry stone masonry.
 Grouting of masonry.
 Casting of pavement and oints.
 In ecting mortar.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Proper use of the ZARGOMAT pro
12 2019-02-14
WARNING!
Danger due to improper use of the machine!
Improper or unauthorised additional use of the
system can lead to dangerous situations.
Therefore:
 Only use the machine as intended.
 Always observe all processing guidelines from
the material manufacturer.
 Adhere to all specifications in this manual to the
letter.
 The following system uses must be avoided.
They are not authorised:
 Do not use in the foodstuff or pharmaceutical
industries
We accept no responsibility for damages caused by improper or
unauthorised use.
The operator is liable for all damages caused by improper or
unauthorised use.
6.1 Personal safety equipment
In order to minimise negative effects on personal health, personal
safety equipment must be worn during operation.
 Always wear the necessary safety equipment for each
individual task.
 Pay attention to the signs in the work area regarding personal
safety equipment.
Always wear Always wear the following during all work:
Protective suit
The protective suit is tight-fitting, rips easily if caught, has narrow
sleeves and has no protruding parts. It is primarily intended as
protection from being caught by movable machine parts.
Do not wear rings, chains and other jewellery.
Safety shoes
Protects against heavy falling parts and slipping on slippery
surfaces.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Proper use of the ZARGOMAT pro
2019-02-14 1
Safety goggles
Protects the eyes from flying projectiles and liquid splashes.
Light breathing protection
Protects against dangerous dust.
Ear protection
Protects against damage caused by loud noises.
Safety helmet
Protects against falling and flying parts and materials.
Safety gloves
Protects hands from friction, scraping, punctures or deep injuries
as well as from contact with hot surfaces.
Wear for special tas s Special safety equipment is necessary for certain specialist tasks.
These are specially indicated in the individual manual chapters.
These special pieces of equipment are as follows:
Face guard
Protects the eyes and face from flames, sparks or embers as well
as from hot particles or exhaust gases.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Proper use of the ZARGOMAT pro
14 2019-02-14
6.2 Special dangers
The following section details other elements of risk that can occur
according to the risk assessment.
Pay attention to the safety instructions and warnings in the other
chapters in order to reduce health risks and avoid dangerous
situations.
Electric current
DANGER!
Danger of death due to electric current!
Contact with live components can lead to death or
serious injury. Damage to electrical insulation or
individual components can be potentially life-
threatening.
Therefore:
 If insulation damage occurs, switch off the
electrical supply immediately and organise
repairs.
 Work on electrical systems should only be made
by qualified electricians.
 When working on electrical systems, first ensure
that they are completely switched off and free of
voltage.
 Before starting maintenance, cleaning or repair
work, switch off the power supply and secure it
against being switched back on again.
 Do not bypass fuses or disable them. Pay
attention to the correct amp reading when
replacing fuses.
 Keep electrical parts away from sources of
moisture. This can lead to a short-circuit.
Escaping material
DANGER!
Danger of injury due to escaping material!
Escaping material can cause injuries to the eyes
and face.
Therefore:
 Always wear protective goggles.
 When working, always stand so that escaping
mortar cannot hit you.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Proper use of the ZARGOMAT pro
2019-02-14 15
Noise
WARNING!
Danger of damage to hearing!
The loud noises associated with the work area can
cause serious damage to hearing.
Therefore:
 Always wear ear protection when working.
 Only remain in the danger zone for as long as
absolutely necessary.
Dangerous dust
WARNING!
Danger of health problems due to dust!
Inhaled dust can lead to long-term lung damage or
other negative effects on health.
Therefore:
 Always wear light breathing protection in the
danger zone.
Moving parts
WARNING!
Danger of injury due to moving parts!
Rotating and oscillating parts can cause serious
injuries.
Therefore:
 Do not reach into or handle moving parts during
operation.
 Do not open safety covers during operation.
 Pay attention to run-down times:
Before opening covers, ensure that parts are no
longer moving.
 Always wear tight-fitting clothing when working in
the danger zone.
Dirt and other impedances
CAUTION!
Tripping hazards due to dirt and other
impedances!
Dirt and other impedances can form a slipping or
tripping hazard, and can lead to significant injuries.
Therefore:
 Always keep the work area clean.
 Remove objects when they are no longer
needed.
 Indicate tripping hazards with yellow and black
tape.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Safety devices
16 2019-02-14
7 Safety devices
WARNING!
Danger of death due to non-functioning safety
devices!
Safety devices provide the highest possible levels
of operational safety. Although they make
processes more complicated, they must never be
disabled. Safety is only guaranteed when safety
devices are intact.
Therefore:
 Before starting work, check that the safety
devices are correctly installed and are fully
functional.
 Never disable the safety devices.
 Do not obstruct access to safety devices such as
emergency stop keys, trip wires etc.
7.1 Dealing with dangerous situations and accidents
Preventative measures  Always be prepared in case of accidents or fires!
 Make first-aid equipment (bandages, blankets etc.) and fire
extinguishers easily accessible.
 Inform your personnel about accident reporting, first-aid and
rescue equipment.
 Keep access roads free for emergency service vehicles.
When accidents happen...  Activate the emergency stop immediately.
 Organise first-aid measures.
 Remove persons from the danger zone.
 Inform the responsible on-site department.
 Notify the emergency services.
 Clear access roads for emergency service vehicles.

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Technical data PFT ZARGOMAT pro
2019-02-14 17
7.2 Signs
The following symbols and notices are located in the work area.
They refer to the immediate vicinity in which they are attached.
WARNING!
Danger of injury due to illegible symbols!
Over the course of time, labels and signs can
become dirty or unreadable.
Therefore:
 Always keep all safety, warning and operating
notices in a legible condition.
 Replace damaged signs or labels immediately.
8 Technical data PFT ZARGOMAT pro
8.1 General information
Weight
Detail Value Unit
PFT ZARGOMAT pro with hose
cpl. ,1
kg
PFT ZARGOMAT pro without hose 1,1 kg
8.2 Connection
Detail Value
Coupling 25M-Teil
8.3 Operating conditions
Environment
Detail Value Unit
Temperature range 5-40 °C
9 Sound power level
Guaranteed sound power level L WA 95dB (A)
10 Vibrations
Weighted effective value of acceleration to which the upper body parts are exposed <2.5 m/s²

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Decorative plaster attachment glue gun
18 2019-02-14
11 Decorative plaster attachment glue gun
Fig. 1: Decorative plaster attachment
With the attachment for decorative plaster and reinforcing mortar, the
complete application - bonding and reinforcing air assisted for thermal
insulation composite systems with only one sprayer, the PFT
ZARGOMAT pro can be done.
Decorative plaster attachment, glue gun nozzle 10 mm
Article no. 00 01 97 87
12 Recommended accessories
Extension for remote control cable - 16 m
Article no. 00 08 80 49
Extension for remote control cable - 25 m
Article no. 20 45 69 1
Extension for remote control cable - 50 m
Article no. 20 45 69 4

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Overview ZARGOMAT pro with hose cpl.
2019-02-14 19
13 Overview ZARGOMAT pro with hose cpl.
13.1 Overview article number 00420058
1 2 4
7 6
Fig. 2: Overview ZARGOMAT pro
1 Mortar hose
2 Rotatable distributor
Hook
4 Locking lever
5 Connection for remote control
6 Lever
7 Connection for mortar hose
5

PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Transport, pac aging and storage
20 2019-02-14
14 Transport, pac aging and storage
14.1 Safety instructions for transport
Improper transport
CAUTION!
Damage can be caused by improper transport!
Significant damage may occur if the equipment is
transported incorrectly.
Therefore:
 Proceed with care when unloading packages
and transporting goods on-site. Always observe
the symbols and instructions on the packaging.
 Only remove packaging immediately before
assembly.
14.2 Transport chec list
Inspect the goods for damage and missing parts immediately
after delivery.
If external transportation damage can be seen, proceed as follows:
 Do not accept the delivery, or accept it only under reservations.
 Note the damage on the transportation documents or
the delivery note of the carrier.
 Submit the appropriate claim.
NOTE!
Always submit a claim for the defects as soon as
they are detected. Damage claims can only be
accepted within the applicable deadlines for
submission.
15 Pac aging
Pac aging information Individual packages are packed according to the applicable
transportation requirements. Only environmentally-friendly
materials were used for the packaging.
The packaging is intended to protect individual components from
harm during transportation, corrosion and other damage up to the
point of assembly. Do not destroy the packaging and only remove
it shortly before assembly.
Provided no agreements for the return of the packaging have been
made, separate the materials according to type and size and reuse
or recycle them accordingly.