Phaesun Solar Modul Ascent 45W Setup guide

Phaesun GmbH · Brühlweg 9 · 87700 Memmingen · Germany · Telefon [phone] - 0 · Telefax [phone] · [e-mail] · www.phaesun.com
Stand 10/2013 JAZStand 10/2013 JAZ
Solar Modul Ascent 45W, Solar Modul Ascent 21W:
flexible, lightweight, thin-layer solar module 12 V, fluoropolymer for the use
with 12 Volt rechargeable batteries
This manual includes information about safety, operation, capacity and main-
tenance of the module, as well as technical instructions which you should
make yourself familiar with before you use your solar panel! Please read
these instructions carefully before installation!
Safety Warnings
This manual does not list all precautions needed for safe work.
Follow local guidelines.
Modules may not be folded or creased during handling and storage. They
may only be rolled up “cell” side out to a diameter of no less than 40 cm
(15 inches)
Folding and excessive bending will cause cracks and internal short circuits
which will create locally over currents causing overheat and melting the
encapsulation materials
Voltage of a single module is not dangerous.
Never connect more than 2 modules in series (24 V-systems)
Work under dry conditions with dry tools.
Modules exposed to sunlight produce DC electricity. Live parts may cause
electric shock. Avoid contact with the metal terminal leads in order to
reduce the risk of electrical shock.
Use electrically insulated tools when wiring modules.
Connect your system in a carefully vented environment and make sure
there are no highly inflammable gases or vapours existing.
Observe proper polarity when connecting the module into an electrical
circuit. Reverse connection will damage the module and may result in fire
and/or personal injury (Figure 1).
Do not use non-rechargeable batteries!
Please observe during work with batteries and electrical equipment the
industrial standards and safety instructions of respective manufacturers!
Avoid partially shading modules under load to prevent hot spots and/or
reduction in power.
Artificially concentrated sunlight shall not be directed onto the module.
Do not carry the module by the wires.
Do not cut, scratch, or puncture the Module.
When trimming the adhesive from around the perimeter of the module,
do not cut the module in any way.
Do not stand or walk on the module.
Do not immerse unconnected connectors in liquid.
Do not drop or allow objects to fall onto the Module.
Do not attempt to open, or otherwise dismantle the junction box.
Installation
1. Choose an appropriate position to assemble your panel on a solid surface.
2. Fix the module in a position that ensures the cell surface is inclined
towards the sun and choose a location where the solar module is able to
absorb as much sunlight as possible. Direct the panel to the south side to
achieve the best possible charging performance.
3. Connect the solar panel over a charge controller (not included in delivery)
with your battery.
Mind the correct polarity (+) and connect the terminal of the extension ca-
ble correspondingly with the positive battery pole, the charge controller, or
any other optional 12 V device and the (–) terminal with the negative pole
Reverse connection will damage the module and may result in fire and/or
personal injury
During installation, roll modules up “cell” side in a diameter of no less than
80 cm (30 inches)
Do not immerse your panel entirely and over a longer period in water
Modules may only be rolled up
“cell” side out to a diameter of
no less than 40 cm (15 in)
flexible Modules may not be
folded or creased during
handling and storage
water-resistant
Safety and Installation Manual
Solar Modul Ascent 45W/ 21W

Phaesun GmbH · Brühlweg 9 · 87700 Memmingen · Germany · Telefon [phone] · Telefax [phone] · [e-mail] · www.phaesun.com
Transportation and storage
Roll up the flexible solar panel with the cell surface on the outside! Never roll
up the panel too tight, the minimum diameter must be 40 cm, otherwise the
module will be damaged.
Cleaning
Clean module surfaces only with alcohol, window cleaner, or a mild soap &
water solution and a lint-free cloth
Do not use any aggressive cleansing agents or solvents since they may dama-
ge the module. Neither use any pointed, or sharp-edged items on it since they
might damage the panel surface!
Troubleshooting
1. Function: You can check the solar panel output with a multimeter.
2. Connections: Check the cabling for loose wires or corrosion. Check the
polarity!
3. Voltage: Check the open-circuit voltage between the positive (+) and the
negative (–) connections by means of a voltmeter
4. Battery: Make sure your battery is efficient and rechargeable. In case of
need consult your battery trader to get the exact details and instructions
of battery testing.
5. Capacity: Make sure your system is properly dimensioned and consult your
dealer to get more information and advice.
Bild 1
positive / +
negative / –
Electrical Specifications (Measured under Standard Test Conditions)
WSLE-0210-023 WSLE-0450-023
Article number 310092 310091
Power (Pmax in W) 21,0 45,0
Voltage at Pmax (Vmp in V) 15,8
Current at Pmax (Imp in A) 1,4 3,00
Open Circuit Voltage (Voc in V) 23,0
Short Circuit Current (Isc in A) 1,80 3,55
Power Tolerance not to exceed –0%, +10%
External Dimensions
Length 1148 +/– 5 mm 2182 +/– 5 mm
Width 330 +/– 5 mm 330 +/– 5 mm
Weight 0,80 kg 1,00 kg
Temperature Coefficients
Power –0.50%/°C (±10%)
Vmp –0.51%/°C (±10%)
Imp +0.01%/°C (±10%)
Voc –0.42%/°C (±10%)
Isc +0.03%/°C (±10%)
Standard Test Conditions: 25°C, 1 kW/m2, AM 1.5
Warranty
The legal period of warranty shall be applied. In case the product is defect,
please consult your manufacturer or dealer. For warranty processing, or
repair, please forward an invoice copy and the reason for rejection and/or a
description of malfunction.
Phaesun GmbH grant a warranty of two years from the original date of
purchase of the new product on provided that it can be excluded that the
product has been used inappropriately.
Limitation of Warranty
The warranty does not include any damages to assembly components caused
by inappropriate use, handling or assembly, repair, loss in transit, or damages
through a mischance or caused by fire, the intervention of third parties or
acts of God.
Disclaimer
The liability shall be limited to the repair of the defective product or a replace-
ment delivery for faulty workmanship respectively.
The liability of this warranty shall not include damages of any other kind, any
loss of profits or any other consequential loss, liability for income which can
customarily be achieved with the product(s) sold, shall be ruled out.