phaiser TECTON BHS-530 User manual

TM
haiser
USER MANUAL
TECTON
BHS-730
v6.0

2
The BHS-730 is more than just a Bluetooth
headset. While providing best all day wea-
ring comfort it lets you listen to your favorite
tunes in premium stereo quality, keeping you
connected to the world at all times.
By connecting to your phone or tablet
through Bluetooth instead of cables, this
headset saves you lots of hassle and
supports your active lifestyle wherever you
go.
The BHS-730 employs Nanocoating-Techno-
logy to safeguard itself against Sweat and
Moisture.
The BHS-730 complies with the Bluetooth
V4.1 Standard.

3
Product Features
1. Lightweight metal earbud design for
all-day wearing comfort with strong Bass
and HD Stereo Music.
2. Patented wing-shaped earphone tips
keep the buds in your ears during even
the toughest workout.
3. Magnetic earphone design enables you
to securely stow your earphones while
not in use.
4. The easily operable buttons offer
functions for answering phone calls and
controlling audio playback.
Upper button
Increase volume, Next, FF
Middle control button
On/Off, Play/Pause, Answer/Hang up
Lower button
Decrease volume, Previous, REV

4
Specifications
Bluetooth Specication: Bluetooth 4.1
Battery: Lithium Polymer Battery 3.7V
Standby Time: UP to 250 hours
Talk Time: UP to 8 hours
Music Playback Time: UP to 8 hours
Charging Time: around 1.5 hours
Operating Temperature: 14°F/-10°C to
140°F/60°C
First Steps
To ensure best battery performance, it is
recommended to charge the headset fully
before first use.
Please open the charging port cover on the
control unit with your fingernail, pull it out
a little and plug in the micro USB charging
cable supplied with your headset.

5
Charging the Headset
Just plug in the micro USB charging cable.
You can choose to either use a dedicated
wall charger with USB ports (like a mobile
phone charger), your computers USB ports
or basically any powered USB port. Once
you start charging the indicator-LED on the
control unit will be constantly Red. After the
charge is complete, the LED will turn Blue.
Note regarding volume control
Please be aware that fast pressing Volume
plus or Volume minus will trigger the next-
or previous track function.
In order to smoothly increase or decrease
volume, please allow 0,5s between presses.

6
1. Remove the silicone tip
from the earphone.
2. Clean the earphone
nozzle of any debris with
a dry cloth.
3. Insert the earphone
sound port nozzle into
the tip‘s core at an angle.
Then push the rest of the
tip onto the earphone‘s
nozzle.
4. Repeat for the other side
Installing the Comply Earphone
Replacement Tips

7
1. Squeeze down the foam
tip and roll the tip into a
thin, round cylinder.
2. Pull back and up on your
ear to open the canal.
Gently insert the entire tip
into the ear.
3. Hold the tip in place until
it expands
Inserting the Comply™ Premium
Earphone Tip

8
Note regarding the functions described
in this manual: Not all phones or other
connected Bluetooth devices support every
function. For further information, please refer
to your device’s user manual.
Pairing
Before using the headset for the first time,
you must pair it with another Bluetooth-en-
abled device (for example a phone). The
headset will automatically enter pairing
mode after you power it on and become vi-
sible to other devices. While in pairing mode,
the headset will show a solid Blue LED.
1. Put the earphones in your ears and keep
the middle button on the control unit
pressed until you hear the audio message
“Power On”. The LED will turn blue.
2. On your phone, find the Bluetooth menu.
Scan for new devices. Look for “BHS-730”
on the list of unpaired devices and tap it.
Hint: Sometimes it may be neccesary to
turn Bluetooth Off on your phone and
back On to see the unpaired device.
3. Once the headset is successfully connec-
ted to your phone, you will hear the audio
message “Connected”.

9
Additional Pairing Notes
1. If asked for the Pass/PIN code, please
enter “0000”. Newer phones don‘t require
this.
2. The headset will automatically turn off if
not paired within 5 minutes.
Manual Pairing, Pairing with a
second device or Re-Pairing:
1. Simultaneously press and hold the Minus
and the Middle Control Buttons on the
control-unit for 3 seconds while the head-
set is turned On. You will hear the audio
message “Disconnected” (The original
connection will be lost while in pairing
mode).
2. Search the Bluetooth menu of your
device for “BHS-730” and complete above
regular pairing steps until successfully
connected.
3. To delete all pairings from the headset,
press and hold the Minus and the Middle
Control Buttons on the control-unit for
more than 10 seconds until you hear the
double low tone confirmation.

10
Multipoint
This headset is capable of connecting with
2 devices at the same time, enabling you to
use the headset with both devices simulta-
neously.
A common application, for example, is to
connect your phone and your tablet-pc. You
will be able to enjoy media on your tablet-pc
while not missing phone calls from your
phone.
1. Pair the headset with the first device
according to the instructions under
“Pairing” (Turn the headset on and select
“BHS-730” in the Bluetooth menu).
2. Pair the headset with the second device
according to the instructions under
“manual pairing” (press and hold Minus
and Middle buttons for 3 seconds). All
control button functions will initially work
on this device.
3. Now go back to the first device and
connect the headset again through the
device’s Bluetooth menu. Just tap it
and you will hear the voice confirmation
“Connected”.

11
Additionally you can use the manual
pairing method when you already have 2
devices connected to the headset and like
to connect the headset to a third, different
device instead.
Of course you can reconnect one of the 2
previously connected devices again through
its Bluetooth menu to use Multipoint func-
tions again.
Auto Reconnect
1. If you turn the headset off, it will be
disconnected from your phone. It will
automatically attempt to reconnect once
turned back on and in range.
2. A device which has been paired with
the headset, but was not the most
recent device to connect to it, must be
reconnected through the Bluetooth-menu
by selecting “BHS-730”.

12
Out Of Range
1. If headset and phone are separated by
more than 10 meters (33 feet), they will
disconnect. The headset will alert you by
playing a warning tone for 4 times and
then drop the connection.
2. In case headset and phone do not auto-
matically reconnect once back in range,
briefly press the middle button on the
control unit to manually reconnect. You
can also use Manual Reconnect to abort
pairing mode and connect to the last
connected device.
3. While you are in multi connection mode,
a device which goes out of range, will lose
connection. The headset will notify you
for one minute. In multi connection mode
you will need to reconnect a lost device
through its Bluetooth menu.
4. In case you intentionally switched off the
Bluetooth function on a single connected
device and hear the “Disconnected” mes-
sage, you can immediately go to the Blue-
tooth menu of your other device (phone
or tablet) to connect the headset by
using the regular pairing steps described
earlier. The headset will become visible to
other devices as soon as all connections
are dropped or it’s forced to pairing mode

13
by pressing and holding Minus and Middle
control buttons at the same time for 3
seconds.
ON / OFF-Function
Keep the middle button on the control unit
pressed until you hear the audio message
“Power On”. You will see the LED turn Blue
for a short time, then the LED will turn off if
automatically reconnected to your phone or
stay blue while in pairing mode.
To turn off the headset, press and hold the
middle button on the control unit again until
you hear the “Power Off” message. The in-
dicator LED on the control unit will turn Red
and then shut off.
If you leave your earbuds powered On and
walk away from them until they disconnect,
they will automatically power down after 5
minutes.

14
User Experience
The BHS-730 is capable of reporting many
events with Voice Prompts including readout
of phone numbers. Voice Prompts are enab-
led by default.
In addition to the default Voice Prompt User
Experience, the BHS-730 supports a second,
very minimalistic Beep Tone User Experien-
ce. This may be more suitable for a proficient
user as it doesn‘t report many events inclu-
ding high/medium battery, connection and
pairing status.
If for example you set custom ringtones
on an iPhone, you will be able to turn off
the phone number readout and hear the
custom tones by switching to the Beep Tone
Experience. Most Android users will hear the
headset‘s default ringtone.
While in pairing mode or connected to a
device and Not streaming, press all 3 buttons
on the control unit until you hear two low
tones confirming that the Beep Tone Experi-
ence has been activated.
To switch back to the Voice Prompt Experi-
ence, press the Plus and Minus buttons until
you hear two low tones.

15
Answering Calls
As soon as you have an incoming call, the
headset will read the phone number of the
caller to you. To answer, briefly press the
middle control button. The call will be trans-
ferred to your headset if not set differently
in your phone.
In case you don‘t hear the caller‘s voice
on your headset, but the call is connected,
you may Transfer Audio to the headset by
keeping Middle control button and “+” (up-
per button) pressed at the same time until
you hear a short beep. To switch audio from
the headset to your phone, apply the same
procedure.
Refusing Calls
To refuse a call, double press the middle
control button and the call will be rejected.
You will hear a confirmation tone.
Ending Calls
To end a call, press the middle control button
briefly or end the call through your phone.
Last Number Redial
To redial the last number you called, simul-
taneously press and hold the middle control
button and the “+” (upper button) until the
phone starts dialing.

16
Volume Control
By briefly pressing “+” (upper button) you
can increase the volume and by pressing
“-” (lower button) you can decrease it. Be
careful not to press too quickly consecuti-
vely as this will trigger next/previous track
function. When the headset volume reaches
the maximum, you will hear a warning tone.
Warning: Listening to music on a high volu-
me over a longer period of time will damage
your hearing ability.
Voice Assistant and Voice Dialing
Double press the middle control button to
activate your phone’s Voice Assistant functi-
on such as Siri or Google Now. It‘s necessary
that your phone supports this feature and
that it‘s turned on. Please refer to your pho-
nes user manual for further information.
Play / Pause
During media playback you can press the
middle control button briefly to start, pause
or resume playback. It is also possible to
use your phone’s media player to control
this function. Sometimes it‘s necessary to
manually start an App before the headset
controls start working.

17
Next / Previous Track
During media playback you can skip
between tracks by double pressing the “+”
(upper button) for Next Track or “-” (lower
button) for Previous Track.
Fast Forward / Rewind
During media playback you can fast forward
by pressing and holding the “+” (upper
button). When you arrive at your desired
position, release the button and normal
playback will resume.
To rewind a track, use the “-” (lower button)
in the same way. It is necessary for your
media player to support this feature.
Equalizer Settings
In case you want to change the way the
headset reproduces music from your device,
press and hold “+” and “-“ at the same time
until you hear a short interruption in play-
back. This will change the equalizer setting.
There are 3 equalizer settings available: “Nor-
mal” (default), “Bass” and “Treble”. Try them
out to find the most suitable one for your
preferred music style.

18
Battery Status Notification
Every time you turn the headset on, you will
hear the battery status notification. There are
3 battery levels reported:
“Battery High”: 100% to 66% battery life
“Battery Medium”: 66% to 33% battery life
“High-low beep”: 33% to 0% battery life
While the headset is already turned on, you
can trigger the battery status notification
manually by briefly pressing “+” and “-” at
the same time.
The headset will start to report low battery
automatically, once the battery life reaches 5
to 10 minutes before automatic shutdown.
On iOS and some Android devices, you
will be able to see the battery level of the
headset in the upper right corner near the
Bluetooth-symbol.

19
Three Way Calling
To answer a second call coming in on either
of your connected devices without hanging
up the first call (putting the first caller on
hold), briefly press the middle button while
the second call is ringing.
To answer a second call and hang up the
active call, double press the middle control
button while the second call is ringing.
To reject a second call, press and hold the
middle control button for 1 second while the
call is ringing.
To switch between active and held call, put-
ting the active call on hold, press and hold
the middle control button for 1 second.
To hang up the active call, briefly press the
middle control button.
Microphone Mute and Unmute
While on a call, press and hold the “-” button
for 2 seconds, until you hear the notification
tone, to mute the microphone. To unmute
the microphone, repeat this procedure.

20
Troubleshooting the headset
Issue: Headset does not work
Solution: Please make sure the headset is
turned on and charged.
Issue: Headset does not automatically
reconnect to phone
Solution: While On, briefly press the middle
control button to initiate a connection
attempt. If this does not help, delete
BHS-730 from your Bluetooth menu, turn
Bluetooth Off and back On and re-pair the
headset.
Issue: Volume is too low
Solution: Please increase volume on both,
your phone and your headset.
Issue: Battery lasts shorter than expected
Solution: Turn down the volume. High volu-
me will drain the battery faster than lower
volume.