Start here.
Pharos 585 Rugged PDA
Hardware Overview
Before You Turn on the Device
Picture 1
Picture 3
Picture 2
1. Rotate the back cover knob to the un-lock position (view Picture 1) and then remove the battery cover.
2. There are 2 card slots at the top side of battery compartment, the SD Card slot is located on the left side
and the SIM Card slot is located on the right side. Insert corresponding card into the slots according to Picture 2.
3. Insert the battery into the battery compartment. Replace the battery cover.
Rotate the knob to the lock position (view Picture 3), to lock the battery cover.
Powering the Device On/Off
1. When the device is powered off, press and hold the Power key for 3~5 seconds to turn on the device.
2. When the device is turned on, press the Power key to switch the device into sleep mode.
3. When the device is in sleep mode: press the Power key to wake up the device.
4. To turn off the device completely, press and hold the Power key for a few seconds, and then click Yes to confirm turning off the device.
The QSG provides the information you need to get you started. If you need more detailed instructions,
the complete user manual is availabe to download in PDF format from www.pharosgps.com.
Pharos Technical Support: 888-PHAROS-8
Pharos Website: www.pharosgps.com
1. Make sure the battery is sitting in the battery compartment correctly.
2. Connect the device to the AC adapter and plug the AC adapter (supplied with the device) into a power
outlet; or connect the device to a PC with the USB cable (supplied with the device).
Charging the Battery