PHI VILLA PV-461 User manual

USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
please contact our Customer Service
h
E02GA003-BL-N/E02GA003-GR-N
VHUYLFH#DOSKDPDUWVFRP
We appreciate the trust and confidence you have placed in PHI VILLA through the purchase of our product. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing PHI VILLA!
THANK YOU
Life Gets Better With
PV-461
1

Notice
1.50% Tighten before fixings all screws, Allen wrench is recommended instead of an electric
drill.
2.Place the item on a flat ground to adjust and make sure it remains stable.
3.Tighten up all screws with tools gradually.
4.If the screws are not aligned with holes during assembly, please loosen all all the other
screws to 50% and continue the assembly process.
5.If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten
up all screws again.
6.Note: If one or more screws are fully tightened during assembly,chances are the others
will not be aligned with holes. In addition, all the holes are disigned to be relatively larger
to provide more space for the adjustment of the screws.
Warranty
LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame to be free of Manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
For a copy of our full limited warranty, please contact our customer service team below.
This warranty is a limited warranty, and applies to the original purchase is required. This is a
residential warranty and does not apply to commercial use. This collection carries a (1) year
limited warranty and is valid from original date of purchase to the original owner (proof of
purchase required).
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and
abusive.
In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question
is no longer in production.

2
PART LIST AND HARDWARE
Ax2
Seat Frame
Back Frame
Dx2
Left Frame
Bx3 Cx3
Right Frame
Bench Seat Frame
Ex1
Bench Back Frame
Fx1
Table Leg Frame
Gx2
Table Side Frame
Hx2
Seat Cushion
Jx2
Bench Cushion
Kx1
Table Glass
Lx1
Bolt M6x30
Nx42
Washer 16x8x1
Ox42
Allen Key
Px1

3
STEP 1
Connect left frame B & seat frame
A with bolt N with allen key
STEP 2
Connect the part from step 1 and right
frame C with bolt N with allen key
STEP 3
Connect the part from step 2and back
frame Dwith bolt N with allen key
STEP 4
Put on the seat cushion J to finish
single chair

4
STEP 5
Connect left frame B & bench seat
frame Ewith bolt N with allen key
STEP 6
Connect the part from step 5 and right
frame C with bolt N with allen key
STEP 7
Connect the part from step 6 and bench
back frame F with bolt N with allen key
STEP 8
Put on the bench cushion K to
finish Bench

5
STEP 9
Connect Table leg frame G & table side
frame H with bolt N with allen key
STEP 10
Connect the part from step 9 and table
side frame H with bolt N with allen key
STEP 11
Connect the part from step 10 and Table
leg frame G with bolt N with allen key
STEP 8
Put on Table Glass L to finish Table