Philco TB100HH9 User manual

Owner's Manual
TB100HH9
DTV Digital to Analog Converter
(Set Top Box)
© 2008 Funai Electric Co., Ltd.
THANK YOU FOR CHOOSING PHILCO.
NEED HELP FAST?
READ YOUR OWNER'SMANUAL FIRST FOR QUICK TIPS
THAT MAKE USING YOUR PHILCO PRODUCT MORE ENJOYABLE.
IFYOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-317-6062 WHILE WITH YOUR PRODUCT.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
X6035UD_TB100HH9.indd 1X6035UD_TB100HH9.indd 1 2008/05/29 14:21:282008/05/29 14:21:28

2
EN
Before Using
1. Read instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings -All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions - All operating and use
instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specic reason, such as
the possibility of the loss of an authorization code for
a CATV converter, is not intended to be unplugged
by the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in
the cleaning description otherwise required in item 5.
6. Attachments - Do not use attachments not
recommended by this product manufacturer as they
may cause hazards.
7. Water and Moisture - Do not use this product near
water-for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
8. Accessories - Do not place this product on an
unstable cart, stand, tripod, bracket, or table.
This product may fall, causing serious injury
to someone, and serious damage to the
appliance. Use only with a cart, stand,
tripod, bracket, or table recommended
by the manufacturer, or sold with this
product. Any mounting of the appliance
should follow the manufacturer’s instructions and
should use a mounting accessory recommended by
the manufacturer. An appliance and cart combination
should be moved with care.
Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination to
overturn.
AMEUBLES - Cet appareil ne doit être
placé que sur un meuble (avec ou sans
roulettes) recommandé par le fabricant. Si
vous l’installez sur un meuble à roulettes,
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The caution marking is located on the bottom of the cabinet.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
Important Safeguards
déplacez les deux ensembles avec précaution. Un
arrêt brusque, l’utilisation d’une force excessive et des
surfaces irrégulières risquent de déstabiliser l’ensemble
et de le renverser.
9. Ventilation - Slots and openings in the cabinet and the
back or bottom are provided for ventilation and to ensure
reliable operation of this product and to protect it from
overheating, and these openings must not be blocked
or covered. The openings should never be blocked by
placing this product on a bed, sofa, rug, or other similar
surface.This product should never be placed near or
over a radiator or heat register. This product should not
be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10. Power Sources - This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or
local power company. For this products intended to
operate from battery power, or other sources, refer to
the operating instructions.
11. Grounding or Polarization - This product is equipped
with a polarized alternating-current line plug(a plug
having one blade wider than the other). This plug will
t into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should
still fail to t, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
12. Power-Cord Protection -
Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
the point where they exit from the appliance.
13. Outdoor Antenna grounding - If an outside antenna
or cable system is connected to this product, be
sure the antenna or cable system is grounded so
as to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of grounding
X6035UD_TB100HH9.indd 2X6035UD_TB100HH9.indd 2 2008/05/29 14:21:292008/05/29 14:21:29

3
EN
Before Using
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements
for the grounding electrode. (Fig. A)
14. Lightning - For added protection for this product
receiver during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to
this product due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as
contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of re or electric shock.
17. Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short out parts that
could result in a re or electric shock. Never spill liquid
of any kind on this product.
18. Servicing - Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualied service personnel.
19. Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualied service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged
or frayed.
b. If liquid has been spilled, or objects have fallen into
this product.
c. If this product has been exposed to rain or water.
d. If this product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls may result in damage and will often
require extensive work by a qualied technician to
restore this product to its normal operation.
e. If this product has been dropped or damaged in
any way.
f. When this product exhibits a distinct change in
performance-this indicates a need for service.
20. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specied by the manufacturer that
have the same characteristics as the original part.
Unauthorized substitutions may result in re, electric
shock, injury to persons or other hazards.
21. Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform routine safety checks to determine that this
product is in proper operating condition.
22. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including ampliers) that produce heat.
GROUND CLAMPS
NEC - NATIONAL
ELECTRICAL CODE
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
ANTENNA LEAD
INWIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
GROUND CLAMP
ELECTRIC SERVICE
EQUIPMENT
The serial number of this product may be found on the bottom of the unit. You should record the number and
other vital information here and retain this book as a permanent record. Serial numbers are not kept on le.
Date of Purchase Dealer Phone No.
Dealer Purchase from Model No.
Dealer Address Serial No.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU
FOND.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling,
standing or climbing on it. A falling unit can cause serious injury or even death.
X6035UD_TB100HH9.indd 3X6035UD_TB100HH9.indd 3 2008/05/29 14:21:302008/05/29 14:21:30

4
EN
Before Using
Location
For safe operation and satisfactory performance
of this product, keep the following in mind when
selecting a place for its installation:
Shield it from direct sunlight and keep it away
from sources of intense heat.
Avoid dusty or humid places.
Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the
ventilation holes at the top and bottom of the
product. Do not place the product on a carpet
because this will block the ventilation holes.
Install the product in a horizontal position.
Avoid locations subject to strong vibration.
Do not place this product near strong magnetic
fields.
Avoid moving this product to locations where
temperature differences are extreme.
Avoid the Hazards of Electrical
Shock and Fire
Do not handle the power cord with wet hands.
Do not pull on the power cord when
disconnecting it from an AC wall outlet. Grasp it
by the plug.
If by accident, water is spilled on your the
product, unplug the power cord immediately
and take the product to our Authorized Service
Center for servicing.
Do not place anything directly on top of the
product.
A Note about Recycling
This product’s packaging materials are recyclable
and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
•
•
•
•
•
•
•
•
•
•
•
Important Copyright Information
Unauthorized recording or use of broadcast
television programming, video tape, lm or other
copyrighted material may violate applicable
copyright laws. We assume no responsibility for the
unauthorized duplication, use or other acts which
infringe upon the rights of copyright owners.
FCC WARNING - This equipment may generate
or use radio frequency energy. Changes or
modications to this equipment may cause
harmful interference unless the modications
are expressly approved in the instruction
manual. The user could lose the authority to
operate this equipment if an unauthorized
change or modication is made.
Precautions
X6035UD_TB100HH9.indd 4X6035UD_TB100HH9.indd 4 2008/05/29 14:21:302008/05/29 14:21:30

5
EN
Before Using
Table of Contents
Before Using
Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Information on Digital Broadcasting . . . . . . . . . . . . . . . 7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Location of Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connections
Connecting to a TV without A/V Jacks . . . . . . . . . . . . 10
Connecting to a TV with A/V Jacks . . . . . . . . . . . . . . . . 10
Connecting to a Cable Box (Optional). . . . . . . . . . . . . 11
Connecting to Other Devices . . . . . . . . . . . . . . . . . . . . . 12
Initial Setup (Setup Wizard)
Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Basic Operation
Selecting Channels on the STB . . . . . . . . . . . . . . . . . . . 15
Advanced Operation
Autoscan (Receiving Channels) . . . . . . . . . . . . . . . . . . . 18
Adding/Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 18
Adjusting Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Selecting Display Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting the Time Zone and D.S.T
(Daylight Saving Time) . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
V-chip Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Closed Caption Options . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Auto Power Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Viewing Analog TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Others
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Specications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
© 2008 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto
is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the
content herein without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other trademarks used herein remain the exclusive property
of their respective owners. Nothing contained in this manual should be construed as granting, by implication
or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or
any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property
rights to the fullest extent of the law.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
X6035UD_TB100HH9.indd 5X6035UD_TB100HH9.indd 5 2008/05/29 14:21:302008/05/29 14:21:30

6
EN
Before Using
Overview
CONNECTION
AConnecting to
a TV without A/V jacks
a TV without A/V jacks
Conexión a un TV sin tomas de A/V
P10
TV without
A/V jacks
SET TOP BOX
BConnecting to
a TV with A/V jacks
a TV with A/V jacks
Conexión a un TV con tomas de A/V
P10
TV with
A/V jacks SET TOP BOX
CConnecting to
a Cable Box
a Cable Box
Conexión a una caja de
cable
P11
Cable Box
TV with
A/V jacks SET TOP BOX
DConnecting to
Other Devices
Other Devices
Conexión a otros
dispositivos
P12
DVD or VCR
TV with
A/V jacks SET TOP BOX
SETUP WIZARD
1. Language for TV screen
Idioma para la pantalla
2. Connection for audio output
Conexión para salida de audio
3. Time zone
Husos horarios
4. Daylight savings time (D.S.T)
Hora de verano (D.S.T)
5. Display mode
modo de indicaciones
6. Channel scanning
Búsqueda de canales
P14
Viewing Analog TV
Viendo TV Analógica
P27
X6035UD_TB100HH9.indd 6X6035UD_TB100HH9.indd 6 2008/05/29 14:21:312008/05/29 14:21:31

7
EN
Before Using
Information on Digital Broadcasting
Digital terrestrial
antenna
Digital
terrestrial signals
STB (Set Top Box)
converts the ATSC signal
to analog signal
TV
Receives
ATSC
ATSC
This STB makes it possible to view the digital TV
programs on your analog TV by converting the
digital signal to the analog signal. You can use
most features provided by the digital broadcast,
except that the resolution of the image is always
output in 480i (standard resolution).
Accessories
Check the following accessories when unpacking the STB:
Remote control:
NA385UD (x1) Owner’s manual: 1VMN25973 (x1) AA battery (x2) RF cable: WPZ0901TM002 /
WPZ0901TM005 (x1)
Installing Batteries
Instalación de pilas
1 Unsnap the battery cover from the
back of the remote control.
Abra la cubierta de pilas de la parte
trasera del mando a distancia.
2 Install two AA batteries making
sure the polarity (+ /
- ) is correct.
Instale dos pilas AA asegurándose que
la polaridad (+ / - ) sea la correcta.
3 Snap the battery
cover back.
Cierre la cubierta de
pilas.
CAUTION:
Do not mix battery types (alkaline and manganese, or old ones and
new ones).
No mezcle tipos de baterías (baterías alcalinas y de manganeso, ni pilas viejas
con pilas nuevas).
Do not recharge, short-circuit, heat, burn or disassemble batteries.
No recargue, caliente, queme o desarme baterías ni provoque un corto circuito
con ellas.
Remove batteries from battery compartment that is not going to be
used for a month or more.
Quite las pilas del compartimento de pilas si no se va a utilizar durante un mes o más.
•
•
•
NOTE:
When replacing batteries,
replace them in pairs.
Cuando cambie las pilas,
hágalo por pares.
•
X6035UD_TB100HH9.indd 7X6035UD_TB100HH9.indd 7 2008/05/29 14:21:322008/05/29 14:21:32

8
EN
Before Using
Location of Controls
Ubicación del control
Remote Control
Mando a distancia
9
1
2
4
3
6
5
7
8
10
11
13
12
To operate this STB with a universal remote, check the instruction manual for remote and find Philco
brand STB code. If you do not find the code or the code does not work, try to use Sylvania brand STB
code instead.
•
1 STANDBY-ON button: Turns STB on and o.
Conecta y desconecta el STB.
2 Number buttons
3 OK button
4 SETUP button: Displays“SETUP” menu.
Switches“RF OUT” setting by holding this button
down over 3 seconds.
Despliega el menú“AJUSTE”.
Cambia la conguración de“SALIDA RF”al mantenerse
presionado durante 3 segundos.
5 ALT. CH: Returns to the last selected channel.
Regresa al último canal seleccionado.
6 AUDIO button: Selects alternative audio
languages (if available).
Selecciona idiomas de audio alternativos (si existen).
7 . (Conrm) button: Press to conrm the channel
selection made by [the Number buttons].
Presione para conrmar la selección del canal, hecha
con [los botones de Números].
8 DISPLAY button: Displays the channel banner.
Despliega el banner del canal.
9 RETURN button: Returns to the previous menu
screen.
Regresa a la pantalla de menú anterior.
10 Navigation buttons K/ L/ s/ B
11 EPG button: Displays the Electronic Program
Guide.
Despliega la Guía Electrónica de Programas.
12 CH K/ Lbuttons
13 STILL button: Freezes the image on the TV
screen.
Congela la imagen de la pantalla del TV.
X6035UD_TB100HH9.indd 8X6035UD_TB100HH9.indd 8 2008/05/29 14:21:332008/05/29 14:21:33

9
EN
Before Using
Front Panel
Panel frontal
12
1 Remote control sensor
2 POWER indicator:
Turns green when the STB is in operation.
Se vuelve verde cuando el STB está en operación.
Rear Panel
Panel trasero
21345
1 AC power cord
2 AUDIO OUT jacks (Right-red / Left-white):
Connect your TV, stereo system or VCR etc. with
standard audio cables.
Conecte su TV, sistema estéreo o VCR, etc., con cables
de audio estándares.
3 VIDEO OUT jack (yellow):
Connect your TV or VCR etc. with a standard
video cable.
Conecte su TV o VCR, etc., con un cable estándar de
video.
4 ANT. IN jack:
Connect an antenna.
Conecte una antena.
5 ANT. OUT jack:
Connect to the ANT. IN jack on your TV.
Conecte a la toma ANT. IN de su TV.
X6035UD_TB100HH9.indd 9X6035UD_TB100HH9.indd 9 2008/05/29 14:21:332008/05/29 14:21:33

10
EN
Connections
1Disconnect the AC power cords of the devices from the AC outlet.
Desconecte los cables de alimentación de los aparatos del tomacorriente CA.
2Disconnect RF coaxial cable from antenna input jack of your TV.
Desconecte el cable coaxial de RF del conector hembra de entrada de antena de su televisor.
3Make the connections as illustrated below.
Efectúe las conexiones tal como se ilustra a continuación.
4Plug all AC power cords into AC outlets, then turn all devices on.
Enchufe todos los cables eléctricos de CA en los tomacorrientes de CA y conecte la alimentación de todos los equipos.
AConnecting to a TV without A/V Jacks
Conexión a un TV sin tomas de A/V
RF cable
(supplied)
cable de RF
(se incluye)
STB
TV antenna
Antena de TV
TV
BConnecting to a TV with A/V Jacks
Conexión a un TV con tomas de A/V
TV
STB
TV antenna
Antena de TV
Audio cable
cable de audio Video cable
cable de
video
yellow
yellow
yellow
yellow
yellow
yellow
white
white
white
white
white
white
red
red
red
red
red
red
NOTE:
If your TV has only one audio jack, connect the AUDIO OUT jack (L) (white) on the STB to the audio input
jack on the TV.
Si su TV sólo tiene una toma de audio, conecte la toma AUDIO OUT (L) (blanco) del STB, a la toma de entrada de audio
del TV.
•
X6035UD_TB100HH9.indd 10X6035UD_TB100HH9.indd 10 2008/05/29 14:21:332008/05/29 14:21:33

11
EN
Connections
CConnecting to a Cable Box (Optional)
Conexión a una caja de cable (opcional)
TV STB
Incoming
cable signals
Señales del cable
de entrada
Cable box (optional)
Cable box (optional)
Cable box (optional)
caja de cable (opcional)
caja de cable (opcional)
caja de cable (opcional)
cable de RF (se incluye)
cable de video
TV antenna
Antena de TV
cable de audio
RF cable (supplied)
Video cable
Audio cable
empresa de
TV por cable
Cable TV
company
yellow
yellow
yellow
white
white
white
red
red
red
yellow
yellow
yellow
white
white
white
red
red
red
Note to the Cable TV System Installer:
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National
Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as
possible.
Observación para el instalador del sistema de cable de TV:
Este recordatorio se provee para alertar al instalador del sistema de cable de TV sobre el Artículo 820-40 del Código
Eléctrico Nacional, el cual proporciona pautas para una puesta a tierra adecuada, y en particular especica que la puesta
a tierra del cable debe estar conectada al sistema de puesta a tierra del edicio, lo más cerca posible del punto de entrada
del cable.
X6035UD_TB100HH9.indd 11X6035UD_TB100HH9.indd 11 2008/05/29 14:21:342008/05/29 14:21:34

12
EN
Connections
DConnecting to Other Devices
Conexión a otros dispositivos
TV STB
TV antenna
Antena de TV
DVD Recorder or VCR
DVD Recorder or VCR
DVD Recorder or VCR
Grabador de DVD o videograbador
Grabador de DVD o videograbador
Grabador de DVD o videograbador
RF cable
cable de RF
RF cable
(supplied)
cable de RF
(se incluye)
Audio cable
cable de audio
Video cable
cable de video
cable de audio
Audio cable
yellow
yellow
yellow
white
white
white
red
red
red
yellow
yellow
yellow
white
white
white
red
red
red
yellow
yellow
yellow
white
white
white
red
red
red
Splitter
Divisor
NOTE:
If your DVD recorder or VCR has only one audio jack, connect the AUDIO OUT jack (L) (white)
on the STB to the audio input jack on the DVD.
Si su grabador de DVD o videograbador sólo tiene una toma de audio, conecte la toma AUDIO OUT (L)
(blanco) del STB, a la toma de entrada de audio del DVD.
•
X6035UD_TB100HH9.indd 12X6035UD_TB100HH9.indd 12 2008/05/29 14:21:342008/05/29 14:21:34

13
EN
Initial Setup (Setup Wizard)
Initial Setup
(Setup Wizard)
Initial Setup
Ajùste inicial
1 Press [STANDBY-ON] on the remote control to activate the STB.
Presione [STANDBY-ON] en el mando a distancia para activar el STB.
lights up in green
se vuelve verde
2 Turn on the TV, and select the viewing channel (ch3 or external input channel) on
your TV. (Refer to your TV’s manual.)
Encienda el TV, y seleccione el canal que quiera ver (canal 3 o uno de entrada externo) en su TV. (Véase el
manual del TV.)
1
23
456
CH.
CH.
789
0
1
2
Appropriate Viewing Channel
Conguración apropiada de el Canal de Visión
Viewing
Connection STB Cable Box DVD or VCR
A(p.10) “CH3”
--
B(p.10) External input channel
Canal de entrada externo
--
C(p.11) External input channel
Canal de entrada externo Ch3
-
D(p.12) “CH3”
-
External input channel
Canal de entrada externo
If your TV’s ch3 is already occupied, select ch4, and set the STB’s output channel to ch4. You can
switch ch3 / ch4 by holding [SETUP] down over 3 seconds.
Si el c3 de su TV ya está ocupado, seleccione el c4 y luego ajuste el canal de salida del STB a c4. Puede alternar
entre el c3 y 4 manteniendo presionado [SETUP] durante 3 segundos.
”SETUP WIZARD” screen automatically appears.
Follow the directions shown on the TV screen to set the each setting.
•
X6035UD_TB100HH9.indd 13X6035UD_TB100HH9.indd 13 2008/05/29 14:21:352008/05/29 14:21:35

14
EN
Initial Setup (Setup Wizard)
3 Select “CONTINUE” using [ s/ B],
then press [OK].
Seleccione“CONTINÚE”utilizando [s/ B]y presione
[OK].
“CONTINUE”:
“CANCEL
”:
CONTINUE
CANCEL
To continue setup
To cancel to leave pre-arranged
setup
This SETUP WIZARD will help you with the initial
setup on your own.
4 Select the language using [ K/ L],
then press [OK].
Seleccione el idioma utilizando [K/ L]y presione [OK].
Select the language for setup display.
Elija idioma de preparación.
Sélectionner langue écran config.
ESPAÑOL
ENGLISH
FRANÇAIS
5 Select the connection for audio
output using [ s/ B], then press [OK].
Seleccione la conexión para salida de audio mediante
[s/ B] y luego presione [OK].
AUDIO OUT :
RF OUT
:
Connecting STB and TV via AUDIO
Cable
Connecting STB and TV via RF
Cable
AUDIO OUT RF OUT
Select the connection for Audio output.
Select “AUDIO OUT” if...
- you are using the standard audio cable to
connect the STB to your TV. (Connection Bor
Con pages 10 and 11.)
Seleccione “AUDIO FUERA” si...
- está utilizando el cable de audio normal para
conectar el STB a su TV. (conexión Bo Cen las
páginas 10 y 11.)
Select “RF OUT” if...
- you are using the RF cable to connect the STB
to your TV. (Connection Aor Don pages 10
and 12.)
Seleccione “RF FUERA” si...
- está utilizando el cable RF para conectar el STB a su
TV. (conexión Ao Den las páginas 10 y 12.)
6 Select your time zone using [ K/ L],
then press [OK].
Seleccione su huso horario con [K/ L]y presione [OK].
Select Time Zone.
ATLANTIC
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
EASTERN
7 Select “ON” or “OFF” for Daylight
Saving Time (D.S.T) using [ s/ B],
then press [OK].
Seleccione“ON”u“OFF”para la hora de verano. (D.S.T)
utilizando [s/ B]y presione [OK].
Select Daylight Saving Time.
NOTE:
2:00AM of the second Sunday in
March until 2:00AM of the first
Sunday in November.
OFFON
8 Select the desired display mode
using [ K/ L], then press [OK] (refer
to page 20).
Seleccione el modo de indicación deseado utilizando
[K/ L]y presione [OK].
Select display mode.
ZOOM
FULL
LETTERBOX
9 Select “AUTOSCAN” using [ K/ L],
then press [OK].
Seleccione“AUTOEXPLO.” mediante [K/ L]y luego
presione [OK].
AUTOSCAN will rescan all channels.
This may take a while to complete.
EXIT
AUTOSCAN
The system is now scanning.
12% Channel Found
EXIT
STB starts receiving available digital channels
and stores them in the channel map.
When the scanning is complete,
“AUTOSCAN COMPLETED” will be indicated.
After autoscan is complete, use [CH K/ L]
to verify whether STB is receiving channels
properly.
The“SETUP WIZARD” is now complete.
El“ASISTENTE DE PREP.” ahora ha nalizado.
To cancel during scanning:
Press [SETUP] or [OK].
Para cancelar durante la exploración: Presione [SETUP] o [OK].
If autoscan is canceled, some channels not yet
scanned may not be received. We recommend
completing autoscan.
You can do autoscan and adding / deleting
channel later. Refer to page 18.
•
•
•
•
•
X6035UD_TB100HH9.indd 14X6035UD_TB100HH9.indd 14 2008/05/29 14:21:362008/05/29 14:21:36

15
EN
Basic Operation
Basic Operation
About Sub-channel Broadcasting
Digital broadcasting oers a service that enables
multiple signals, called“sub-channels”, to be sent
simultaneously on one main channel by using its
high compression technology.
ATSC
18:00
18:30
19:00
19:30
20:00
CH4-1
(Soccer)
CH4-2 (News)
CH4-2 (News)
CH4-3
(Tennis)
CH4-1 (Soccer)
CH4-1 (Soccer)
CH4-1 (Soccer)
: Can be changed by
using [CH K/ L ].
Selecting Channels on the STB
1 Enter the main channel number.
If the main channel number is 1 digit, press [ . ]
when nish entering.
2 Enter the sub-channel number.
If the sub-channel number is 1 digit, press [OK]
when nish entering.
E.g., selecting 6.1
E.g., selecting 26.12
NOTE:
If you do not have a particular sub-channel
number you want to select, enter the main
channel number and then press [OK]. (If the
main channel number is 1 digit, you should
press [OK] twice.) The STB automatically tunes
into the lowest sub-channel for the selected
main channel.
Press [ALT. CH] to return to the previously
viewed channel.
“NO SIGNAL” appears after the sub-channel
broadcast is over.
•
•
•
X6035UD_TB100HH9.indd 15X6035UD_TB100HH9.indd 15 2008/05/29 14:21:372008/05/29 14:21:37

16
EN
Basic Operation
Choosing Audio Language
You can change languages when the channel
provides alternate languages.
Press [AUDIO] repeatedly.
ENGLISH 1/4
OTHER 4/4
SPANISH 2/4
FRENCH 3/4
Audio language changes as follows.
NOTE:
“OTHER” is indicated when the
language is not English, Spanish
nor French.
For international stations audio
language will still be displayed as
English.
•
•
•
Picture Still
You can freeze the image on the TV screen.
Press [STILL].
The image on the TV screen will be paused.
To cancel still mode:
Press any button except [STANDBY-ON].
NOTE:
The sound output will not be
paused.
If “no signal” is detected or protected
signal is received during still mode,
the image remains paused and the
sound output will be muted.
If the TV is left on STILL for a long
period of time, the still image may
cause a burn-in effect damaging the
TV screen.
•
•
•
X6035UD_TB100HH9.indd 16X6035UD_TB100HH9.indd 16 2008/05/29 14:21:382008/05/29 14:21:38

17
EN
Basic Operation
Channel Banner
The channel banner provides you with the information on the selected channel.
Press [DISPLAY].
CC
3.1
50
SIGNAL
ENGLISH 1/2
TV-Y7 FV
SMILE ABC-XXX
RESTRICTED PROGRAM
TV-Y7 FV
Program title Channel number :
Audio language
Station name
Signal strength :
Indicates the signal strength of
the current channel.
Program ratings :
Displays all the available ratings.
Active ratings are highlighted in
red.
Information Icons
LOCK:
Indicates that the current program
is blocked according to your V-chip
setting.
Indicates that the program being
broadcast is available with closed
captioning.
CC (Closed Caption):
To remove the channel banner:
Press [DISPLAY].
Electronic Program Guide (EPG)
Electronic Program Guide (EPG) is the electronic equivalent of a printed TV program guide.
You can view a list of programs scheduled for the next few hours up to the next seven days.
To display the correct information on“EPG”,“TIME ZONE”and ”D.S.T” must be set correctly.
1 Press [EPG] while watching TV.
CC
PREV NEXT
SMILE 2-1
SMILE 2-2
SMILE 2-3
12:00PM-1:00PM
3.1
EPG
SMILE Prog 2 ABC-XXX
Closed Caption :
Indicates that the program being
broadcast is available with closed
captioning.
Channel number
Program title
Time segment for the program.
“NOW” icon will be displayed on
the right for the current program.
Program description
Indicates that there is a program
information available for next or
previous program.
2 Select the desired program using [ s/ B].
To remove the EPG:
Press [EPG].
NOTE:
“EPG” will be cleared after 5 minutes.
For channel numbers with blank description, the broadcasting station may not
provide signals for “EPG”.
When the program description consists of more than 4 lines, use [ K/ L] to scroll
up / down in the list.
•
•
•
X6035UD_TB100HH9.indd 17X6035UD_TB100HH9.indd 17 2008/05/29 14:21:382008/05/29 14:21:38

18
EN
Advanced Operation
Autoscan
(Receiving Channels)
Autoscan receives available digital channels and
stores them in a channel map.
CAUTION:
If autoscan is skipped, digital channels may not
be received correctly.
•
1 Press [SETUP].
2 Select “CHANNEL” using [ K/ L],
then press [OK].
3 Select “AUTOSCAN” using [ K/ L],
then press [OK].
CHANNEL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD/DELETE
ANTENNA
AUTOSCAN
RF OUT
4 Select “AUTOSCAN” using [ K/ L],
then press [OK].
AUTOSCAN
EXIT
CHANNEL
TIME
DETAIL
INITIAL
AUTOSCAN will rescan all channels.
This may take a while to complete.
BACK
AUTOSCAN
AUTOSCAN
The system is now scanning.
12% Channel Found
EXIT
STB starts receiving available digital
channels and stores them in the channel
map.
When the scanning is complete,
“AUTOSCAN COMPLETED” will be indicated.
After autoscan is complete, use [CH K/ L]
to verify whether STB is receiving channels
properly.
•
•
•
To cancel during scanning:
Press [SETUP] or [OK].
NOTE:
If canceled, some channels not yet scanned may
not be received. We recommend completing
autoscan.
When you want to completely refresh the
channel map, delete all the channels, then do
the autoscan again. See “Adding/Deleting
Channels”on this page for details.
•
•
When“NO SIGNAL” appears on the TV screen:
Verify the antenna connection, then scan again.
The STB tunes in channel 2-1 and“NO SIGNAL”
appears if the STB could not receive any channels.
Adding/Deleting Channels
Add or delete desired channels in the channel map.
CAUTION:
You cannot recover the deleted channels once
they are deleted unless you perform the
autoscan again.
•
1 Press [SETUP].
2 Select “CHANNEL” using [ K/ L],
then press [OK].
SETUP
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD/DELETE
ANTENNA
AUTOSCAN
RF OUT
3 Select“ADD/ DELETE” using [ K/ L],
then press [OK].
CHANNEL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD/DELETE
ANTENNA
AUTOSCAN
RF OUT
X6035UD_TB100HH9.indd 18X6035UD_TB100HH9.indd 18 2008/05/29 14:21:382008/05/29 14:21:38

19
EN
Advanced
Operation
Add
4 With“ADD” selected, enter the main
channel number you want to add,
then press [OK] or wait for a few
seconds to x the number.
If the main channel number is 1 digit, press [0]
rst.
NOTE:
Entering sub-channel number is not required.•
5 Press [OK] again to add the channel
to the channel map.
E.g., adding channel 6
(or leave for
a few seconds)
ADD/DELETE
6
10
20
58
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD
DELETE
6.X
E.g., adding channel 26.
(or leave for
a few seconds)
ADD/DELETE
6
10
20
26
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD
DELETE
26.X
The selected channel is now added.
To continue adding:
Repeat steps 4 and 5.
6 Press [SETUP] to exit.
•
Delete
4 Select “DELETE” using [ K/ L], then
press [OK].
ADD/DELETE
10
20
26
56
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD
DELETE
10.1
5 Select the channel number you want
to delete from the channel list on the
right using [ K/ L], then press [OK].
E.g., deleting channel 26.
ADD/DELETE
10
20
26
58
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD
DELETE
26.1
ADD/DELETE
10
20
58
60
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD
DELETE
58.1
The selected channel is now deleted.
To continue deleting:
Repeat step 5.
6 Press [SETUP] to exit.
•
X6035UD_TB100HH9.indd 19X6035UD_TB100HH9.indd 19 2008/05/29 14:21:392008/05/29 14:21:39

20
EN
Advanced Operation
Adjusting Antenna
You can verify the signal strength of each channel.
1 Select a channel to adjust using [the
Number buttons] or [CH K/ L].
2 Press [SETUP].
3 Select “CHANNEL” using [ K/ L],
then press [OK].
4 Select “ANTENNA” using [ K/ L],
then press [OK].
CHANNEL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD/DELETE
ANTENNA
ADD/DELETE
RF OUT
STB starts receiving the signal for the
channel.
5 By referring to the on-screen
indication, adjust the antenna’s
direction to get the best reception.
WEAK STRONG
NOW
10
PEAK
50
ANTENNA
EXIT
CHANNEL
TIME
DETAIL
INITIAL
10.1
BACK
Status bar:
Stretches to the right as the signal
strength gets stronger.
Peak indicator:
Indicates the highest strength ever
reached.
To adjust other channels:
Select the channel using [CH K/ L], then adjust it.
6 Press [SETUP] to exit.
•
Selecting Display Mode
You can adjust the aspect ratio of the digital TV
program to t your 4:3 TV monitor.
Display Mode
1 Press [SETUP].
2 Select “DETAIL” using [ K/ L], then
press [OK].
SETUP
EXIT
CHANNEL
TIME
DETAIL
INITIAL
CLOSED CAPTION
DISPLAY MODE
AUTO POWER DOWN
V-CHIP
4 HOURS
LETTERBOX
3 Select“DISPLAY MODE”using [ K/ L],
then press [OK].
DETAIL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
CLOSED CAPTION
DISPLAY MODE
AUTO POWER DOWN
4 HOURS
LETTERBOX
V-CHIP
4 Select the desired display mode
using [ K/ L], then press [OK].
*Descriptions of each settings are explained
in the“Information on Display Mode”on the
next page.
Select display mode.
ZOOM
FULL
LETTERBOX
5 Press [SETUP] to exit.
X6035UD_TB100HH9.indd 20X6035UD_TB100HH9.indd 20 2008/05/29 14:21:412008/05/29 14:21:41