Philco Pei 729 tcd User manual

RANGE HOOD

OWNER’S MANUAL

PEI 729 TCD

PEI 619 TG

PEI 619 TCG

Dear customer,

Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all

the instructions in this user’s manual.

EN - 1

CONTENTS

PART 1: IMPORTANT SAFETY INSTRUCTIONS .................................................................................................2

Cautions................................................................................................................................................................................................. 2

Lamp....................................................................................................................................................................................................... 4

PART 2: DESCRIPTION OF THE APPLIANCE .....................................................................................................5

PART 3: INSTALLATION ..................................................................................................................................... 8

Use........................................................................................................................................................................................................... 8

Electrical connection ........................................................................................................................................................................ 9

Mounting ..............................................................................................................................................................................................9

Installation Step................................................................................................................................................................................10

PART 4: OPERATION ........................................................................................................................................ 13

4 speeds 5 keys Touch control.........................................................................................................................................................13

4 speeds Electronic switch............................................................................................................................................................14

PART 5: MAINTENANCE AND CLEANING ....................................................................................................... 15

PART 6: BEFORE YOU CALL THE SERVICE CENTRE ........................................................................................16

EN - 2

PART 1: IMPORTANT SAFETY INSTRUCTIONS

Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences,

damages or res caused by not complying with the instructions in this manual, is declined. The hood is

conceived for the suction of cooking fumes and steam and is destined only for domestic use.

!It is important to conserve this booklet for consultation at any moment. In the case of sale, cession or move,

make sure it is together with the product.

!Read the instructions carefully: there is important information about installation, use and safety.

!Do not carry out electrical or mechanical variations on the product or on the discharge conduits.

!Before proceeding with the installation of the appliance verify that there are no damaged all components.

Otherwise contact your dealer and do not proceed with the installation.

Note: the elements marked with the symbol “(*)” are optional accessories supplied only with some models or

elements to purchase, not supplied.

Cautions

Before any cleaning or maintenance operation, disconnect hood

from the mains by removing the plug or disconnecting the mains

electrical supply.

Always wear work gloves for all installation and maintenance

operations.

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in

a safe way and understand the hazards involved.

Children shall not be allowed to tamper with the controls or play

with the appliance.

Cleaning and user maintenance shall not be made by children

without supervision.

The premises where the appliance is installed must be suciently

ventilated, when the kitchen hood is used together with other gas

combustion devices or other fuels.

The hood must be regularly cleaned on both the inside and

outside (at least once a month).

EN - 3

This must be completed in accordance with the maintenance

instructions provided in this manual. Failure to follow the

instructions provided in this user guide regarding the cleaning of

the hood and lters will lead to the risk of res.

The aming of foods beneath the hood itself is severely prohibited.

The use of exposed ames is detrimental to the lters and may cause a re risk, and must therefore be avoided

in all circumstances.

Any frying must be done with care in order to make sure that the oil does not overheat and ignite.

CAUTION: Accessible parts of the hood may become hot when used with cooking appliances.

For lamp replacement use only lamp type indicated in the Maintenance/Replacing lamps section of this

manual.

WARNING! Do not connect the appliance to the mains until the installation is fully complete.

With regards to the technical and safety measures to be adopted for fume discharging it is important to closely

follow the regulations provided by the local authorities.

The ducting system for this appliance must not be connected to any existing ventilation system which is being

used for any other purpose such as discharging exhaust fumes from appliances burning gas or other fuels.

Do not use or leave the hood without the lamp correctly mounted due to the possible risk of electric shocks.

Never use the hood without eectively mounted grids.

The hood must NEVER be used as a support surface unless specically indicated.

Use only the xing screws supplied with the product for installation or, if not supplied, purchase the correct

screws type.

Use the correct length for the screws which are identied in the Installation Guide.

In case of doubt, consult an authorised service assistance centre or similar qualied person.

This appliance is marked according to the European directive 2012/19/EC on Waste Electrical and Electronic

Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by inappropriate

waste handling of this product.

The symbol on the product, or on the documents accompanying the product, indicates that this appliance

may not be treated as household waste. Instead it should be taken to the appropriate collection point for

the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local

environmental regulations for waste disposal.

For further detailed information regarding the process, collection and recycling of this product, please contact

the appropriate department of your local authorities or the local department for household waste or the shop

where you purchased this product.

EN - 4

Suggestions for a correct use in order to reduce the environmental impact: Switch ON the hood at minimum

speed when you start cooking and kept it running for few minutes after cooking is nished. Increase the speed

only in case of large amount of smoke and vapour and use boost speed(s) only in extreme situations.

Replace the charcoal filtres when necessary to maintain a good odour reduction efficiency. Clean the grease

filtres when necessary to maintain a good grease filter efficiency. Use the maximum diameter of the ducting

system indicated in this manual to optimize efficiency and minimize noise.

Lamp

The available lamps and the correspondence ILCOS D codes and lamp pictures:

Usetypelamp(oruseinalternativetypelamp)DSR-1.5-S-68(ILCOSDcodeinaccordingtostandardIEC61231).

- Self-ballasteduorescentreectorlamp–Integralinductiontypeballast

- Maxwattage:1.5W

- Voltagerange:12V

- Dimensions:

Stainless Steel Surface

Unit: mm

The available lamps and the correspondence ILCOS D codes and lamp pictures:

Usetypelamp(oruseinalternativetypelamp)DBR-8-H-445(ILCOSDcodeinaccordingtostandard

IEC61231).

- Self-ballastedfluorescentreflectorlamp–Integralinductiontypeballast

- Maxwattage:8W

- Voltagerange:220-240V~50Hz

- Dimensions:

This appliance contains an LED light source which must be replaced by a service

person.

EN - 5

PART 2: DESCRIPTION OF THE APPLIANCE











1. Chimney

2. Casing

3. TouchControl

Panel

4. LED Lamp

5. Grease filter

6. Motor

EN - 6











1. Chimney

2. Casing

3. Electronic Switch

4. LED Lamp

5. Grease filter

6. Motor

EN - 7











1. Chimney

2. Casing

3. Electronic Switch

4. LED Lamp

5. Grease filter

6. Motor

EN - 8

PART 3: INSTALLATION

Use

The hood is designed to be used either for exhausting or filter version.

Ducting version

In this case the fumes are conveyed outside of the building by means of a special pipe connected with the

connection ring located on top of the hood.

Attention! The exhausting pipe is supplied.

Diameter of the exhausting pipe must be equal to that of the connection ring.

Attention! The charcoal filter is not supplied. If the hood is supplied with active charcoal filter, then it must

be removed.

Connect the hood and discharge holes on the walls with a diameter equivalent to the air outlet (connection

ange).

Using the tubes and discharge holes on walls with smaller dimensions will cause a diminution of the suction

performance and a drastic increase in noise.

Any responsibility in the matter is therefore declined.

!Use a duct of the minimum indispensible length.

!Use a duct with as few elbows as possible (maximum elbow angle: 90°).

!Avoiddrasticchangesintheductcross-section.

Filter version

The aspirated air will be degreased and deodorised before being fed back into the room.

In order to use the hood in this version, you have to install a system of additional filtering based on

activated charcoal.

Attention!The charcoal filter is not supplied and must be purchased apart.

EN - 9

Electrical connection

The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If

provided with a plug connect the hood to a socket in compliance with current regulations and positioned in

an accessible area, after installation. If it not tted with a plug (direct mains connection) or if the plug is not

located in an accessible area, after installation, apply a double pole switch in accordance with standards which

assuresthe completedisconnectionofthe mainsunder conditionsrelatingtoover-currentcategoryIII,in

accordance with installation instructions.

Warning!Beforere-connectingthehoodcircuittothemainssupplyandcheckingtheecientfunction,always

check that the mains cable is correctly assembled.

Thehoodisprovidedwithaspecialpowercable;ifthecableisdamaged,requestanewonefromTechnical

Service.

Mounting

Before beginning installation:

• Checkthattheproductpurchasedisofasuitablesizeforthechoseninstallationarea.

• Removethecharcoalfilter/sifsupplied.This/theseis/aretobemountedonlyifyouwanttousethehoodin

the filtering version.

• Check (for transport reasons) that there is no other supplied material inside the hood (e.g. packets

with screws, owner’s manual, etc.), eventually removing them and keeping them.

• Removethetapeonthevent.

• Turntheunitoffandunplugitfromtheoutlet.

In the case of the presence of panels and/or walls and/or lateral wall units check that there is sucient space

to install the hood and that access to the command panel is easy.

Expansionwallplugsareprovidedtosecurethehoodtomosttypesofwalls/ceilings.However,aqualied

technician must verify suitability of the materials in accordance with the type of wall/ceiling. The wall/ceiling

must be strong enough to take the weight of the hood. Do not tile, grout or silicone this appliance to the

wall. Surface mounting only.

The minimum distance between the supporting surface for the cooking equipment on the hob and the lowest

partoftherangehoodmustbenotlessthan45cmfromelectriccookersand55cmfromgasormixedcookers.

If the instructions for installation for the gas hob specify a greater distance, this must be adhered to.

Only for some models

An aesthetic ue can be purchased as an optional accessory. Check with the authorized dealer whether the

model in your possession envisages this possibility.

We advise installing the hood after having purchased the ue to check with certainty the most suitable

installation.

EN - 10

Installation Step

• Thecookerhoodshouldbeinstalledsothatthereisaspaceof650-750cmfromthecentreofthemesh

grease lters to the hob. It is the manufacturer of the hob who determines the clearance required and the

clearance quoted by the hob manufacturer must be followed. In the absence of any instructions supplied

withagashobtheminimumdistancebetweenthehobandthehoodmustbeatleast760mm.

• Doublecheckthetapeontheventhasbeenremoved.

tape

• Positionthehangingplateontheceilingandthenmarkthepositionofthescrewholes.Thehangingplate

shouldbesecurelyxedtotheceiling,11xST6x40mmscrewsforwoodenceiling(11xwallplugsis

optional,xornotxareacceptable.)8xexpansionbolts(M6*60)forcementceiling

0

For wooden ceiling

Wall plugs

For cement ceiling

EN - 11

• Fixtheanglebarstothehangingplate,usingthe8xM5screwsandnuts.

Extendtheanglebarstotherequiredheightandthenxtheminpositionusingthe16xM5screwsand

nuts with metal washers.

IMPORTANT: The angle bars must have an overlap of AT LEAST 100 mm.

IMPORTANT: The metal washers should be added in this step.( Washers 0.8*5.2*10, 16pcs.)

+Washer

• When you choose the ducting version, place the exhausting pipe (Ø150-Ø153mm, supplied) on

the hood.TheheadØ153mmwouldconnecttothehood.

IfyouneedtousetheØ120-Ø123mmpipe,youcanplacetheadapter(notsupplied)firstly.

When you choose the filter version, no need the exhausting pipe.

EN - 12

• Slidethelowerchimneysectionontotheanglebarsandraiseituntilitsitsjustbelowtheupperchimney

section. Then lift up the lower chimney and set it with the S hanging hook, in order to convenient for the

following assemble.

Noted: make sure the extraction holes can be covered by the lower chimney.

Liftthemainbodyofthecookerhoodontotheanglebarandthenxitintopositionusingthe16xM5

screws.

IMPORTANT: This stage of the installation process MUST be completed by two people.

IMPORTANT: The 16 x M5 screws MUST be securely tightened.

• Removethehanginghookandthenslidethelowerchimneysectiondownwards,untilitrestsagainstthe

main body of the cooker hood.

For safety reasons, use only the same size of xing or mounting screws that are recommended in this

instruction manual.

Failure to install the screws or xing devices in accordance with these instructions may result in

electrical hazards.

EN - 13

PART 4: OPERATION

4 speeds Five Keys Touch control

Silent: Use this intensity level for slow cooking and boiling with closed pans. This level is used for

cooking with lower steam emissions.

Medium: This is the ideal standard intensity for a normal cooking environment.

3Maximum: If you have much steam in your kitchen, use this level for a intensive ventilation.

BIntensive level: Extra high power for an intensive airfl w.

After5minutesworkinginthismode,theappliancewouldturntothe3rdspeedautomatically.

Light key: Switches the light on and o.

EN - 14

4 speeds Electronic switch

1Silent: Use this intensity level for slow cooking and boiling with closed pans. This level is used for

cooking with lower steam emissions.

2Medium: This is the ideal standard intensity for a normal cooking environment.

3Maximum: If you have much steam in your kitchen, use this level for a intensive ventilation.

BIntensive level: Extra high power for an intensive airow.

After5minutesworkinginthismode,theappliancewouldturntothe3rdspeedautomatically.

Light key: Switches the light on and o.

EN - 15

PART 5: MAINTENANCE AND CLEANING

Regarding the replacement of the bulb, cleaning and maintenance of the appliance, please refer to below

paragraphs of this manual.

Attention!

Before cleaning, switch the unit o and pull out the plug.

I. Regular Cleaning

Useasoft clothmoistened with hand-warmmild soapwateror householdcleaningdetergent. Neveruse

metal pads, chemical, abrasive material or a stiff brush to clean the unit.

II. Monthly Cleaning of the Grease Filter

ESSENTIAL: Clean the filter every month to prevent any risk of fire.

The filter collects grease, smoke and dust, so the filter is directly affecting the efficiency of the cooker hood.

If not cleaned, the grease residue (potentially flammable) will saturate on the filter. Clean it with household

cleaning detergent.

III. Charcoal filter (filter version only)

It absorbs unpleasant odours caused by cooking.

The saturation of the charcoal filter occurs after more or less prolonged use, depending on the type of cooking

and the regularity of cleaning of the grease filter. In any case it is necessary to replace the cartridge at least

everyfourmounths(orwhenthefiltersaturationindicationsystem–ifenvisagedonthemodelinpossession

–indicatesthisnecessity).ThecharcoalfiltermayNOTbewashedorregenerated.

IV. Bulb Replacement

1. Switch the unit o and unplug the appliance.

2. Open the cooker hood and remove the lters.

3. Release the lamp connecters and push the lamp out from inside.

4. Replace with the same type of lamp.

EN - 16

PART 6: BEFORE YOU CALL THE SERVICE CENTRE

If the appliance is not working as it should check the following recommendations for resolving the most

common problems.

If the problem persists or it is not included in the table below, turn o the appliance and disconnect it from the

power socket and contact an authorised service centre.

Problem Solution

The range hood is not working. Check that the power plug is properly inserted in a properly grounded power

socketwiththeparameters220–240V~50Hz.

Check that the motor power switch is in the“On“ position.

The lights are not working. Check that the power plug is properly inserted in a properly grounded power

socketwiththeparameters220–240V~50Hz.

Check that the motor power switch is in the“On“ position.

Check whether the light bulb or uorescent tube is broken.

Exhaust power is weak. Check whether the aluminium lters are dirty.

Check the air outlet, it should be open.

Check whether the carbon lter is not too dirty.

The range hood does not extract the

air directly out (for models without an

exhaust).

Check whether the aluminium filtres are dirty.

Check whether the carbon lter is not too dirty.

ATTENTION:

Use the range hood together with the stove. This will ensure the correct air exhaust. We recommend to leave the range

hood running a few minutes longer than the stove to ensure that all odours are extracted.

EN - 17

Technical drawings PEI 729 TCD

EN - 18

Technical drawings PEI 619 TG

This manual suits for next models

Other Philco Ventilation Hood manuals

Popular Ventilation Hood manuals by other brands

AEG

AEG 420 D Instructions for installation

montpellier

montpellier MON-ICHT101 Installation and operating instructions

Hoover

Hoover HVM900 Instruction on mounting and use

Franke

Franke FCM 904 PW Instructions for use and installation

FALMEC

FALMEC VERSO Series Instruction booklet

Best

Best ANKUP27M Series installation instructions

Verona

Verona INSERT Installation, operating and maintenance instructions

Pelgrim

Pelgrim ISW855 Series Instructions for use

Sirius Satellite Radio

Sirius Satellite Radio SUF1 Installation & operating instructions

Faber

Faber Camino Pro CAPR36SS600 installation instructions

Kruger

Kruger KCE 100PA quick start guide

Imperial

Imperial Powered Liner C2000 Series installation instructions

Amica

Amica OSC 6468 W Operating and maintenance manual

Brisas

Brisas BML-E36AG Use & care manual

Comfee

Comfee CVB27W7ASS user manual

Beko

Beko HCA62640WH user manual

dellonda

dellonda DH127 manual

Best

Best K260A series Specification sheet

Philco PEI 729 TCD User manual

Popular Ventilation Hood manuals by other brands