Philippe+Aglioni SimpleOne User manual

e
rea
Automatic Soap Dispenser
USER MANUAL
AAA
AAA
AAA
AAA
Operational Instructions
1. Unscrew the cover from bottom of unit
2. Insert batteries and screw cover back on
Attention:
Please insert batteries according to the
diagram inside the lid for proper installation.
.
22 3m m
138m m
81mm
Specifications
Name Automatic Soap Dispenser
Model
Unit size 5.4”x 2.3”x 8.8”
Induction distance 0-3.5 Inches
Material PP,ABS
Vol 6.8 oz
Power supply 4 x AAA Batteries
①
②
3. To fill with soap, lift the top cover
4. Press the power button to Power On
5. Place your hand under the sensor area to
operate it
6. Blue light flashes repeatedly to indicate
low battery power
Infrared sensor
Infrared sensor zone
Recommendations
● Use non-granular, non-foaming liquid
soap or hand sanitizer
●Clean dispensing tip regularly and run
pump with warm water
③
④
⑤⑥
Thank you for choosing the SimpleOne™ Automatic Soap Dispenser by PhillipeTaglioni.
Please read the Instruction Manual before using your new SimpleOne™ unit.
© 2014 ALL RIGHTS RESERVED XIUM LLC Xium LLC, 333 Washington Blvd. Ste. 666, Marina Del Rey, CA 90292, USA
1-800-765-3628www.xiumhome.com