Philips EasySense User manual

EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 1 of 12
The Philips EasySense xture-mount sensor is the ideal solution for
per-xture control of new light xtures. It combines occupancy sensing,
daylight harvesting and task tuning in a single, compact package for easy
OEM xture assembly. EasySense operates with the established Philips
Advance Xitanium SR LED driver standard to make a simple two-wire
connection between sensor and driver, thus eliminating the need for
multiple components and auxiliary devices. The result is a cost-eective and
easy-to-design-in solution ideal for energy-savings and code-compliance
strategies. An intuitive app makes conguration and commissioning during
and after installation fast and easy using Philips eld apps.
EasySense with advanced grouping functionaility enables addition of
qualied wireless switches. Up to 40 sensors can be grouped to a switch
using Philips eld apps. In addition to easily adding user control to a
space, the grouping feature facilitates auto-o/manual-on and auto-o/
partial-on use cases. Furthermore, advanced grouping allows scene setting
(e.g., presentation mode for a conference room), as well as occupancy
sharing (i.e., xtures within a group can be programmed to remain at
prescribed light levels so long as occupancy is detected anywhere in
the group).
EasySense for advanced grouping (SNS200) is also DLC qualied and listed
in the QPL for Networked Lighting Controls.
Commercial Product Name Order Code
EasySense Fixture-Mount Sensor SNS200
SNS201
Sensors
EasySense
Fixture-Mount
for Advanced
Grouping

EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 2 of 12
EasySense xture-mount sensor
Features
• Occupancy sensing, daylight harvesting and
task tuning in one device
• Scene setting and occupancy sharing
• Compact size, 2-wire connection
• Operates with Philips Advance Xitanium SR
LED drivers and qualied wireless switches
• Conguration of sensor parameters–
if desired – using NFC or IR via intuitive
Android-based Philips eld apps
• DLC qualied: Listed on the QPL for
Networked Lighting Controls
Benets
• Combines functionality to reduce need for
multiple components
• Quick task tuning in the eld to optimize light
and power levels
• Enables auto-o/manual-on and auto-o/
partial-on application
• Cost-eective solution for energy-savings
and code-compliancy strategies
• 5-year limited system warranty with Philips
Advance Xitanium LED drivers1
• Conguration and commissioning from
the oor
Applications
• Conference rooms
• Individual oces
• Open oces
• Classrooms
• Storage and break areas
• Restrooms
• Lobbies
• Stairways
1. View limited warranty at http://www.usa.lighting.philips.com/support/support/warranty.
Continued on next page.
Product Data
All specications are typical and at 25°C Tcase unless otherwise specied.
Ordering Information
Order Code SNS200
Full Product Name EasySense Fixture-Mount Sensor
Carton Quantity 50 pcs/carton
Physical Information
Overall Dimensions 1.97in x 0.75in x 1.24in / 50mm x 19.0mm x 31.5mm
Housing (Luminaire Hole) 1.73in x 0.67in / 44mm x 17mm (l x w)
Net Weight per Piece 0.6oz / 17gr
Volume Required Inside Luminaire
(LxWxH)
1.87in x 0.75in x 0.95in / 50mm x 19mm x 24mm
Color White
Connectors WAGO 20160 2-pole terminal block rated for AWG24 to AWG18 solid or stranded wire
Electrical Information
Input Voltage Powered by SR driver low-voltage interface
Current Consumption 13mA
Nominal Power Consumption 200mW
Standby Power < 1 W on luminaire level, including driver standby power
Occupancy Sensing
Type Passive infrared (PIR)
Enable/Disable Default enabled
Occupancy Mode Auto-on/o, Manual-on/o, Manual-on/auto-o; Red LED indicates occupancy detected
Group Occupancy Sharing Enabled/disabled
Group Lighting Behavior Background level, task level
Eco-On Level 5-100%
Hold Time 0.5 - 60 minutes
Viewing Angle X=72°, Y = 86° ( See detection pattern)
Background Light Level 0-100%
Prolong Time 0 minutes - innity
Grace Fading 0-25 seconds
Response Time/Fading to Switch On/O 0.7 seconds

EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 3 of 12
EasySense xture-mount sensor
Product Data (continued)
All specications are typical and at 25°C Tcase unless otherwise specied.
Compatible LED Drivers
Daylight Sensing
Enable/Disable Default enabled
Auto-Calibration Upon power-up
Viewing Angle 40° (half value sensitivity); 2% cut-o point at 75°
Task Tuning
Full Light Setting 5-100%
Environment & Approbation
Operating Ambient Temperature Range 0°C to 55°C
Operating Humidity 0 – 95% non condensing
Storage Temperature -25°C to 85°C
Storage Humidity 0-95% non condensing
Max Case Temperature (Tcase) 55°C
Agency Approbations UL, CSA; FCC; Tested and approved for use in plenums
Certication California Title 20
Warranty 5 years
Digital Interface Xitanium SR
Other
Wireless Protocol Zigbee, IEEE 802.15.4
Encryption AES-128
LED Status Indicators Red, Yellow. Yellow LED on: Vacancy & Sensor is functional; Red LED on: Occupancy detected
No. Drivers per Sensor 4 max
Max Distance Switch-to-First-Fixture 33ft line-of-sight
Max Distance Fixture-to-Fixture 40ft line-of-sight
No. Switches per Group 5 max
Field Conguration via NFC or IR, parameters set via Philips eld apps
Driver Model Number Description
XI040C110V054VPT1 Xitanium 40W 0.1-1.1A 27-54V 120-277V SR
XI075C200V054VPT1 Xitanium 75W 0.1-2.0A 27-54V 120-277V SR
Specications available at www.philips.com/xitaniumsr/na.

EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 4 of 12
EasySense xture-mount sensor
1.71 [43.5]
1.71 [43.5]
0.63[16.0]
0.63[16.0]
1.71 [43.5]
1.71 [43.5]
0.63[16.0]
0.63[16.0]
1.72 [43.8] MAX
0.96 [24.3] MAX
0.66[16.8]MAX
1.97 [50.0] MAX
0.30[7.5] MAX
0.75[19.0]MAX
2.37 [60.0]
0.87 [22.0]
R0.09 [2.3]
Mounting hole dimension (+/- 0.2mm)
1.72 [43.8] MAX
0.96 [24.3] MAX
0.66[16.8]MAX
1.97 [50.0] MAX
0.30[7.5] MAX
0.75[19.0]MAX
1.72 [43.8] MAX
0.96 [24.3] MAX
0.66[16.8]MAX
1.97 [50.0] MAX
0.30[7.5] MAX
0.75[19.0]MAX
1.73 [44.0]
0.67[17.0]
R0.09 [2.3]
Mounting hole dimension (+/- 0.2mm)
Sensor Dimensions (in./mm)
Mounting Dimensions (in./mm)
Mounting in cut-out in sheet matal (thickness 0.7 mm to 1.0 mm), tolerance +/-0.2mm
Accessory Mounting Ring
Part Number SMR-50 / Set of 50
• (1) SMR-50 includes a set of
(50) mounting rings
• Ordered separately, not included
with EasySense
• Dimensions: 53mm x 26mm x 1.5mm
Accessory Mounting Bracket
Part Number SMB-50 / Set of 50
• (1) SMB-50 includes (50) mounting brackets
• Ordered separately, not included
with EasySense
• Dimensions: 64.1mm x 25.3mm x 10.3mm
Mounting in U-shaped slot in sheet metal (max thickness 1 mm), tolerance +0.2mm/-0.0mm

EasySense_PLt-16199DS_ES Adv Grouping DS_061818 06/18 page 5 of 12
EasySense xture-mount sensor
Wiring Diagram
XITANIUM SR
LED DRIVER
EASYSENSE LED+
LED+
LED-
LED-
RSET2
SGND
NFC ANTENNA
SR-
Connectors
SR+
SR
SR
LINE
NEUTRAL
GROUND NC
Connectors
(non-polarized)
Use 18AWG solid copper wire,
rated >=600V/90C.
Strip wire to 3/8”.