Philips SE6591B/17 User manual

SE659
US-EN Telephone Answering Machine
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Register your product and get support at
www.philips.com/welcome

1
Table of contents
1 Important Safety
Instructions 4
2 Environment and safety 6
2.1 Safety information 6
2.2 Power requirements 6
2.3 Battery requirements 6
2.4 Telephone connection 6
2.5 Environmental care 7
2.6 Precautions 7
2.7 Equipment Approval
Information 8
2.7.1 Notification to the Local
Telephone Company 8
2.7.2 Rights of the Phone
Company 8
2.8 Interference Information 9
2.9 Hearing Aid Compatibility
(HAC) 10
2.10 FCC RF Radiation Exposure
Statement 10
3Important 10
3.1 Power requirements 11
3.2 Electric, Magnetic and
Electromagnetic Fields
(“EMF”) 12
3.3 Recycle your batteries 12
4TheRBRC
®seal 12
4.1 Service Centers 13
5 Your phone 14
5.1 What’s in the box 14
5.2 Overview of your handset 15
5.3 Display icons and Messages 18
5.4 Overview of the base
station 20
5.5 Base station display 22
6 Conventions Used in this
Manual 22
7 Getting started 23
7.1 Connect the base station 23
7.2 Wall mounting the base 24
7.3 Install your phone 25
7.3.1 Install battery 25
7.3.2 Charge battery 25
7.4 Remove/Attach belt clip 26
7.5 Install optional headset 26
7.6 Power up 26
7.7 Using multipacks 27
7.8 Handset menu structure 28
8 Using your phone 33
8.1 Make a call 33
8.1.1 Predialling 33
8.1.2 Direct dialling 33
8.1.3 Call from redial list 33
8.1.4 Call from the call log 34
8.1.5 Call from the phonebook 34
8.1.6 Call from the phonebook while
already on the phone 34
8.1.7 Call using Direct Access
Memory 35
8.1.8 Enter a Dialing Pause 35
8.2 Answer a call 35
8.2.1 Handsfree answering with
handset 35
Table of contents

2Table of contents
8.3 Answer a call on the other
line 36
8.4 End a call 36
8.5 Using the Redial list 36
8.5.1 Access Redial list 36
8.5.2 View redial number details 36
8.5.3 Save a redial number into the
phonebook 36
8.5.4 Delete a redial number 37
8.5.5 Delete all redial numbers 37
9Usemoreofyour
phone 38
9.1 Switch the handset off/on 38
9.2 Handset keypad lock/
unlock 38
9.3 Text or number entry 38
9.4 Call waiting 38
9.5 Call in progress 38
9.5.1 Adjust earpiece or speaker
volume 39
9.5.2 Mute/Unmute microphone 39
9.5.3 Activate/Deactivate handset
loudspeaker mode 39
9.6 Chain dialing 39
9.7 Using the Intercom 39
9.7.1 Intercom another unit 39
9.7.2 Transfer an external call to
another unit 40
9.7.3 Answer an external call during
intercom 40
9.7.4 Switch between an internal and
external call 40
9.7.5 Establish a three-party
conference call 40
9.8 Locate Handset 41
9.9 Clock and Alarm settings 42
9.9.1 Set Date and Time 42
9.9.2 Set Time and Date Format 42
9.9.3 Set Alarm (Handset only) 42
9.9.4 Set Alarm Tone
(Handset only) 43
10 Using your Phonebook 43
10.1 Store a contact in the
phonebook 43
10.2 Access phonebook 44
10.3 Modify a phonebook entry 44
10.4 Select phonebook melody
(Handset only) 44
10.5 Delete a phonebook entry 45
10.6 Delete all phonebook
entries 45
10.7 Direct Access Memory 45
10.7.1 Add/Edit Direct Access
Memory 45
10.7.2 Delete Direct Access
Memory 46
11 Using the Call log 46
11.1 Access the Call log 46
11.1.1 To choose the format for call
log display 47
11.2 Save call list entry into the
phonebook 47
11.3 Delete a call list entry 47
11.4 Delete all call list entries 48
12 Personal settings 48
12.1 Change the Handset Name
(Handset only) 48
12.2 Ring Settings 48
12.2.1 Set the Ring Volume 48
12.2.2 Set the Ring Tones 49
12.2.3 Activate/Deactivate Key
Beep 49
12.3 Change the Display
Language 49

3
Table of contents
12.4 Select the Display Wallpaper
(Handset only) 50
12.5 Select the Color Theme
(Handset only) 50
12.6 Set the Display Contrast 50
12.7 Set the Backlight Time
(Handset only) 51
12.8 Deactivate/Activate Auto
Hang-Up (Handset only) 51
12.9 Changing the Line Setting
(Base Station only) 51
13 Advanced settings 52
13.1 Easy Call 52
13.1.1 Set Easy Call to On or Off 52
13.1.2 Set Easy Call number 52
13.2 Auto Conference 53
13.3 Call Barring 53
13.3.1 Set Call Barring Mode 53
13.3.2 Set a Call Barring number 53
13.4 XHD Sound 54
13.5 Change PIN 54
13.6 Registration 54
13.6.1 Easy registration 55
13.6.2 Manual registration 55
13.7 Unregister 55
13.8 Reset Unit 56
13.9 Set Area Code 56
13.10 Set Auto Prefix 56
13.11 Change Flash time 57
13.12 Change the Dial Mode 57
13.13 Set First Ring Detection 57
13.14 Changing the Line Setting
(Handset only) 58
13.15 Default Settings 59
14 Network Service 59
14.1 Voice Mail 59
14.1.1 Access Voice Mail 60
14.1.2 Set Voice Mail Number 60
15 Telephone answering
machine (TAM) 60
15.1 Playing Messages 61
15.1.1 Playback of messages via
handset 61
15.1.2 Functions available during
playback 61
15.2 Delete all messages from the
handset 61
15.3 Turn the Answering Machine
On/Off from the Handset 62
15.4 Play, Record, or Delete an
Outgoing Message 62
15.5 Set the Answer mode 62
15.6 Answering Machine
Settings 63
15.6.1 Ring Delay 63
15.6.2 Remote Access 63
15.6.3 Handset Screening 64
15.6.4 Setting the Outgoing Message
Language 65
16 Technical data 65
17 Frequently asked
questions 66
17.1 Connection 66
17.2 Set-up 66
17.3 Sound 66
17.4 Product behaviour 67
18 INDEX 69

4Important Safety Instructions
1ImportantSafety
Instructions
Some of the following information may
not apply to your particular product;
however, when using telephone
equipment, basic safety precautions
should always be followed to reduce the
risk of fire, electric shock and injury to
persons, including the following:
1Read and understand all
instructions.
2Follow all warnings and instructions
marked on the product.
3Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4Telephones should not be used
while you are in a bathtub, shower
or pool. Immersion of the
telephone or handset in water could
cause an electrical shock.
5Slots and openings in the cabinet
back or bottom are provided for
ventilation, to protect it from
overheating.These openings must
not be blocked or covered. The
openings should never be blocked
by placing the product on the bed,
sofa, rug, or other similar
surface.This product should not be
placed in a built-in installation unless
proper ventilation is provided.
6This product should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the type of
power supply to your home, consult
your dealer or local power
company.
7Do not allow anything to rest on
the power cord. Do not locate this
product where the cord will be
abused by persons walking on it.
8Do not overload wall outlets and
extension cords as this can result in
the risk of fire or electric shock.
9Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric
shock.
Never spill liquid of any kind on the
product.
10 To reduce the risk of electric shock,
do not disassemble this product, but
take it to a qualified service
personnel when service or repair
work is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
Incorrect reassembly can cause
electric shock when the appliance is
subsequently used.
11 Do not expose the product to
extreme temperatures such as areas
near a hot radiator or stove or in a
hot car.
12 Do not place lighted candles,
cigarettes, cigars, etc., on the
telephone.
13 Never touch uninsulated telephone
wires or terminals unless the

5
Important Safety Instructions
telephone line has been
disconnected at the network
interface.
14 Never install or modify telephone
wiring during a lightning storm.
15 Never install telephone jacks in wet
locations unless the jack is
specifically designed for wet
locations.
16 Use caution when installing or
modifying telephone lines to
prevent electrical shock and/or fire.
17 Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
AWhen the power supply cord or
plug is damaged or frayed.
BIf the product has been exposed to
rain or water.
CIf the product does not operate
normally by following the operating
instructions.
DIf the product’s cabinet has been
damaged.
EIf the product exhibits a distinct
change in performance.
18 Avoid using a telephone (other than
a cordless type) during an electrical
storm. There may be a remote risk
of electric shock from lightning.
19 Do not use the telephone to report
a gas leak in the vicinity of the leak.
20 Do not place this product on an
unstable cart, stand or table.The
product may fall, causing serious
damage to the product.
IF YOUR PRODUCT UTILIZES
BATTERIES,THE FOLLOWING
ADDITIONAL PRECAUTIONS
SHOULD BE OBSERVED:
1Use only the type and size of
battery(ies) specified in the user
manual.
2Do not dispose of the battery(ies)
in fire. They may explode. Check
with local codes for possible special
disposal instructions.
3Do not open or mutilate the
battery(ies). Released electrolyte is
corrosive and may cause damage to
the eyes or skin. It may be toxic if
swallowed.
4Exercise care in handling
battery(ies) in order not to short
out the battery(ies) with conducting
materials such as rings, bracelets,
and keys.The battery(ies) or
conductor may overheat and cause
burns.
5Do not attempt to recharge the
battery(ies) provided with or
identified for use with this product
that are not intended to be
charged.The battery(ies) may leak
corrosive electrolyte or explode.
6Do not attempt to rejuvenate the
battery(ies) provided with or
identified for use with this product
by heating them. Sudden release of
the battery(ies) electrolyte may
occur causing burns or irritation to
eyes or skin.
7When replacing battery(ies), all
batteries should be replaced at the
same time. Mixing fresh and
discharged batteries could increase
internal cell pressure and rupture

6Environment and safety
the discharged battery(ies). (Applies
to products employing more than
one separately replaceable primary
battery.)
8When inserting battery(ies) into
this product, the proper polarity or
direction must be observed.
Reverse insertion of battery(ies) can
cause charging, and that may result
in leakage or explosion.
9Remove battery(ies) from this
product if storing over 30 days
because the battery(ies) could leak
and damage the product.
10 Discard “dead” battery(ies) as soon
as possible since “dead” batteries
are more likely to leak in a product.
11 Do not store this product, or the
battery(ies) provided with or
identified for use with this product,
in high temperature areas.
Batteries that are stored in a freezer
or refrigerator for the purpose of
extending shelf life should be
protected from condensation during
storage and defrosting. Batteries
should be stabilized at room
temperature prior to use after cold
storage.
12 If your product uses rechargeable
battery(ies), charge the battery(ies)
only in accordance with the
instructions and limitation specified
in the User Manual.
SAVE THESE INSTRUCTIONS
2 Environment and
safety
2.1 Safety information
This telephone is not designed for
making emergency telephone calls when
the power fails. An alternative should be
made available for access to emergency
calling.
2.2 Power requirements
This product requires an electrical supply
of 120 volts, single phase alternating
current, excluding IT installations defined
in standard UL 60950.
2.3 Battery requirements
The handset requires power source of
two rechargeable NiMH batteries, size
AAA 1.2V 600mAh (Hr11/45). IF THE
INCORRECT TYPE OF BATTERIES ARE
USED,A WARNING MESSAGE WILL BE
DISPLAYED.
Use only Philips Multi-Life 600mAh
rechargeable NimH batteries.
For servicing or replacement, you can
purchase a suitable headset through
service centre or retail shop.
2.4 Telephone connection
The voltage on the network is classified
as TNV- 3 (Telecommunication Network
Voltages, as defined in the standard UL

7
Environment and safety
60950). Following a power cut, the call in
progress is lost.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. This precaution may
be particularly important in rural areas.
2.5 Environmental care
Please remember to observe the local
regulations regarding the disposal of your
packaging materials, exhausted batteries
and old phone and where possible
promote their recycling.
2.6 Precautions
• Do not allow the handset to come
into contact with liquids or moisture.
• Do not open the handset, base station
or charger.This could expose you to
high voltages.
• Do not allow the charging contacts of
the charger or the battery to come
into contact with extraneous
conductive materials.
• There is a slight chance that the
telephone could be damaged by an
electrical storm. It is recommended
that users unplug the phone from the
USB socket and the phone line from
the phone wall socket during a storm.
• Because the phone works by sending
radio signals between the base unit
and the handset, wearers of hearing
aids may experience interference in
the form of a humming noise.
• We advise that this phone should not
be used near intensive care medical
equipment, nor by persons with
pacemakers.
• Your phone can interfere with
electrical equipment such as
answering machines, TV and radio
sets, clock radios and computers if
placed too close. It is recommended
that you position the base unit at least
one meter from such appliances.
Use only the mains adapter supplied with
this telephone. Incorrect adapter polarity
or voltage can seriously damage the unit.
Base adapter:
Input: 100 V - 240 VAC 50/60 Hz
Output: 6 VDC 500 mA
Charger adapter:
Input: 100 V - 240 VAC 50/60 Hz
Output: 6 VDC 210 mA
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries;
use recommended type supplied with
this telephone. NiMH batteries must be
disposed of in accordance with the
applicable waste disposal regulations.
FCC CERTIFICATION NUMBER IS
LOCATED ON THE CABINET
BOTTOM
The term “IC:” before the certification
number signifies that Industry Canada
technical specifications were met.This
certification means that the equipment
Caution
Caution
Caution

8Environment and safety
meets certain radio communications and
operational requirements.
2.7 Equipment Approval
Information
Your telephone equipment is approved
for connection to the public switched
telephone network and is in compliance
with parts 15 and 68, FCC Rules and
Regulations and the Technical
Requirements for Telephone Terminal
Equipment published by ACTA.
2.7.1 Notification to the Local
Te l e p h o n e C o m p a n y
On the bottom of this equipment is a
label indicating, among other
information, the US number and Ringer
Equivalence Number (REN) for the
equipment.You must, upon request,
provide this information to your
telephone company.
The REN is useful in determining the
number of devices you may connect to
your telephone line and still have all of
these devices ring when your telephone
number is called. In most (but not all)
areas, the sum of the RENs of all devices
connected to one line should not exceed
5. To be certain of the number of devices
you may connect to your line as
determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA.
A compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a
compatible modular jack that is also
compliant. See installation instructions
for details.
Notes
• This equipment may not be used on
coin service provided by the
telephone company.
• Party lines are subject to state tariffs,
and therefore, you may not be able to
use your own telephone equipment if
you are on a party line. Check with
your local telephone company.
• Notice must be given to the
telephone company upon permanent
disconnection of your telephone from
your line.
• If your home has specially wired alarm
equipment connected to the
telephone line, ensure the installation
of this product does not disable your
alarm equipment. If you have
questions about what will disable
alarm equipment, consult your
telephone company or a qualified
installer.
2.7.2 Rights of the Phone
Company
Should your equipment cause trouble on
your line which may harm the telephone
network, the telephone company shall,
where practicable, notify you that