Philips B120 User manual

B120
Mount on the stand Mount on walls
Light sensor
IR image sensor/ Night vision
Lens
Microphone
Status LED
Temperature and humidity sensor
USB connector for USB power adapter
First-time setup
www.philips.com/welcome
Always there to help you
Register your product and get support at
Reset
EN User Manual
Watch or listen to your baby
1. On your iPhone or iPad, download the Philips
In.Sight app from AppStore.
2. Create and log in to your account.
1. Through Philips In.Sight, connect the baby monitor to the
same Wi-Fi network as your phone.
+
In.Sight
Add more monitors
1. Near your wireless router, connect the baby monitor to power.
2. Wait until the amber light flashes.
Place the monitor in the room
of your baby. Never place the
baby monitor inside or mount it
on the baby’s bed or playpen.
2. As instructed on the screen, put the QR code image in front of the lens of the monitor.
3. Follow the onscreen instructions to complete the setup. The green light is always on when the
connection is complete.
Place
Next
1 sec
Switch to the list of monitors
Talk back
Night vision
Tap to show the options bar. Tap On to switch the night vision on.
After the night vision is on for 10 minutes,
it switches off automatically.
Watch the video
Double tap to zoom in or out. Drag to pan through the video.
Take photos
Record videos
Switch the speaker on or off when your mobile phone goes to the standby mode
Current temperature and humidity
Auto On
Through the Philips In.Sight app, you can watch or listen to your baby on an iPhone or iPad. Make
sure that you have connected your iPhone or iPad to Wi-Fi or 3G/ 4G mobile network. With 3G/
4G usage, data charge from the operator can occur.
To watch or listen to your baby through web browser, go to www. philips.com/insightwebview.
www. philips.com/insightwebview
Indicator of connectivity strength
Strong
Medium
Weak
Disconnected
Tap and hold to talk to the micophone of the mobile phone. You can be
heard on the room of your baby.
C
M
Y
CM
MY
CY
CMY
K
B120_79_UM_V1.1_WK1320.2.pdf 1 5/14/2013 5:16:30 PM

Specifications
General information
AC power adapter
Philips HNB050150a (a = A, B, C, E)
a direct plug-in power adapter with USB output terminal
and a different country plug type ('A'=America, 'B'=Britain,
'C'=Australia, 'E'=Europe)
Input: 100-240 V~ 50/60 Hz, , 0.35 A MAX
Output: 5 V DC 1.5 A
Connectivity
Wi-Fi 802.11 b/g/n, 2.4 GHz
Apps
Platform: iOS 4 or later (excluding iPhone 3GS or earlier
versions)
Lens
Focus mode : Fixed
Focus range : 0.7 to 5 meters
Aperture : F2.8
Digital zoom : 2 x
Night mode : IR LED, 4 meters
Sensors
Ambient light sensor
IR LED
IR range: 4 meters
Temperature & humidity sensor
Range: 0 ºC to 40 ºC, 10% to 80%
Video
Resolution
Streaming throughWi-Fi: 720p (High definition)
Video format
H. 264
Audio
Input
High-sensitive mono microphone
Output
Amplifier: 0.45 W
Speaker : 8 ohm, 0.8 W
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
B120_79_UM_V1.1 WK1320.2
On your iPhone or iPad, alerts sound and the notification
is displayed.
For unread alerts, is displayed.
Tap to play the video from Dropbox.
Follow the onscreen instructions to update the
software.
temperature alert
motion alert
audio alert
Set alerts
Switch on the function of Alerts.
Share the monitor
Check alerts
Monitors
Update the software
Monitors
Update firmware
To enable an alert, tap the icon to light it up.Tap >to set the alert.
To set the area that you want to monitor, hold the corner and drag inwards/outwards; To select
the area that you want to monitor, drag the video to pan through it.
Drag on the bar to select sensitivity.
Motion alert: High sensitivity for all small movements, low sensitivity for major ones
Audio alert: High sensitivity for any sounds, low sensitivity for loud sounds
Monitor settings
In Sharing list, add the email of your friend.
Your friend needs to do the following on his/ her iPhone/ iPad:
Download and install the Philips In.Sight application; Create an
account.
With motion, audio, temperature alerts, the baby monitor
can keep you informed of changes on the side of your
baby. Select the sensitivity level as needed or use the
suggested level.
To use the motion alert at night, make sure that light
sources are available for the baby monitor to detect
motions.
Sharing list >
Motion 100% >
Baby room Online >
Set up your Dropbox
Monitors
Baby room Online > Dropbox recording Off >
5 6 7
I’m Already a Dropbox User >
I’m New to Dropbox >
Start Enable
Alerts with video/ audio
recordings
(A maximum of 25 latest alerts
are displayed.)
Monitors
Switch on or off the status LED on the monitor
Switch on if you mount the monitor on the ceiling
Switch on to go to the live video mode after the
In.Sight app starts up.
Baby room Online >
C
M
Y
CM
MY
CY
CMY
K
B120_79_UM_V1.1_WK1320.2.pdf 2 5/14/2013 5:16:33 PM