Philips SCD570 User manual

SCD570
EN User manual 3
BG Ръководствозапотребителя25
CS Příručkaprouživatele 51
ET Kasutusjuhend 74
HR Korisničkipriručnik 96
HU Felhasználóikézikönyv 120
KK Қолданушының нұсқасы 144
LT Vartotojovadovas 169
LV Lietotājarokasgrāmata 192
PL Instrukcjaobsługi 215
RO Manualdeutilizare 238
RU Руководствопользователя 262
SK Príručkaužívateľa 287
SL Uporabniškipriročnik 311
SR Korisničkipriručnik 334
UK Посібниккористувача 357

Table of contents
1 Introduction 3
2 Product overview 4
3 Preparing for use 4
3.1 Babyunit 4
3.2 Parentunit 5
4 Using the baby monitor 6
4.1 Positioningthebabymonitor 6
4.2 Linkingparentunitandbabyunit 7
5 Functions and feedback on the baby
unit 8
5.1 Nightlight 8
5.2 Lullabyfunction 9
5.3 Pagingtheparentunit 9
5.4 Batterystatuslight 10
6 Functions and feedback on the
parent unit 10
6.1 Volume 10
6.2 Talkfunction 11
6.3 Nightdimmode 11
6.4 Babyunitbatterylowalert 12
6.5 Batterystatusindications 12
6.6 Signalstrengthindicator 14
6.7 Reset 14
7 Menu of the parent unit 14
7.1 Navigatingthemenu 14
7.2 Sensitivity 15
7.3 EcoMaxmode 16
7.4 Nightlight 16
7.5 Lullaby 17
7.6 Feedtimer 17
7.7 Temperature 18
7.8 Cryalert 19
7.9 Clock 19
7.10 Language 20
7.11 Keylock 20
8 Neck strap 21
9 Cleaning and maintenance 21
10 Storage 21
11 Ordering accessories 21
12 Guarantee and support 22
13 Frequently asked questions 22
1 Introduction
Congratulations on your purchase and welcome
to Philips AVENT! To fully benet from the
support that Philips AVENT offers, register your
product at www.philips.com/welcome.
Philips AVENT is dedicated to producing
caring, reliable products that give parents the
reassurance they need.This Philips AVENT baby
monitor provides round-the-clock support by
ensuring you can always hear your baby clearly
without any distracting noise.The DECT technology
guarantees zero interference and a crystal clear
sound between the baby unit and the parent unit.
The temperature sensor enables you to monitor
the temperature in your baby’s room, and offers
you personalised settings to help keep your baby’s
room comfortable.
ENGLISH
3

4
•III. Baby unit
1 Nightlight and nightlight on/off button
2 Power-on light
3 FIND button
4 Microphone
5 Next lullaby button
6 Lullaby play/stop button
7 On/off button
8 Volume + button
9 Battery status light
10 Volume - button
11 Temperature sensor
12 Loudspeaker
13 Socket for small plug of adapter
14 Compartment for non-rechargeable
batteries
15 Lid of compartment for non-rechargeable
batteries
16 Small plug of adapter
17 Adapter
3 Preparing for use
IMPORTANT: Read the safety instructions
carefully before you use the baby monitor
and keep them for future reference.
3.1 Baby unit
Use the baby unit from the mains.To guarantee
automatic power backup in case of mains failure,
we advise you to insert non-rechargeable
batteries.
3.1.1 Mains operation
1 Put the adapter in a wall socket and insert the
small appliance plug into the baby unit.
2 Product overview
•I. Display
1 Signal strength indicator
2 Eco Max indicator
3 Night dim mode symbol
4 Cry alert indicator
5 Mute symbol
6 Battery status indicator
7 Navigation arrow
8 Temperature symbol
9 Message eld
10 Microphone sensitivity indicator
11 Nightlight symbol
12 Lullaby symbol
13 Timer or timer repeat symbol
•II. Parent unit
1 On/off button
2 TALK button
3 Night dim button
4 - button
5 Microphone
6 ’link’ light
7 Display
8 Sound level lights
9 MENU button
10 + button
11 Battery status light
12 OK button
13 Handgrip/attachment hole for neck strap
14 Compartment for rechargeable batteries
15 Lid of compartment for rechargeable
batteries
16 Connection points for charging
17 Rechargeable batteries
18 Neck strap
19 Socket for small plug of adapter
20 Charger
21 Small plug of adapter
22 Adapter

5
3 To reattach the lid, rst insert the lugs into the
openings in the rim of the compartment for
non-rechargeable batteries.
4 Then push down the lid until the lock closes
with a click.
3.2 Parent unit
The parent unit runs on two rechargeable
batteries that are supplied with the baby monitor.
3.2.1 Inserting the rechargeable batteries
1 Slide the lid of the compartment for the
rechargeable batteries off the parent unit.
3.1.2 Placing the non-rechargeable batteries
In case of mains failure the baby unit can run on
four 1.5V R6 AA alkaline batteries (not included).
Do not use rechargeable batteries.The baby
unit does not have a charging function and
rechargeable batteries discharge slowly when they
are not in use.
BWarning:
Unplugthebabyunitandmakesureyourhands
andtheunitaredrywhenyouinsertnon-
rechargeablebatteries.
DNote:
We advise you to use the baby unit on mains
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries.The operating time on non-rechargeable
batteries is 24 hours.
1 Push the lock to release the lid of the
compartment for non-rechargeable batteries
and remove the lid.
2 Insert four non-rechargeable batteries.
DNote:
Make sure the + and - poles point in the right
direction.
ENGLISH

6
2 Put the parent unit in the charger.
•The display goes on and the battery status
indications show that the parent unit is
charging. For battery status indications,
see ‘Battery charge indications’ in chapter
‘Functions and feedback on the parent unit’.
3 Leave the parent unit in the plugged-in
charger until the rechargeable batteries
are fully charged.
DNote:
When you start using the baby monitor, it takes
four charge and discharge cycles before the
rechargeable batteries reach their full capacity.
4 Using the baby
monitor
4.1 Positioning the baby
monitor
BWarning:
Keepthebabyunitoutofthereachofthebaby.
Neverplacethebabyunitinsidethebaby’sbed
orplaypen.
2 Insert the rechargeable batteries.
DNote:
Make sure the + and - poles of the batteries
point in the right direction.
3 Slide the lid of the compartment for the
rechargeable batteries back onto the parent
unit. Push the lid home until it locks into place
with a click.
3.2.2 Charging the parent unit
Charge the parent unit before you use it for the
rst time or when the parent unit indicates that
the batteries are low.
Important:You have to charge the parent
unit for the full 10 hours to have a cordless
operating time of 18 hours.
1 Insert the small appliance plug of the adapter
in the socket on the back of the charger. Put
the adapter in a wall socket.

7
2 Press and hold the on/off button 3on the
parent unit for 2 seconds.
•The display goes on and briey displays all
indicators and symbols.Then the indicators
and symbols fade out and the battery status
indicator appears.
DNote:
When you switch on the parent unit for
the rst time or after a reset, you have to
select your preferred display language (see
‘Language’ in chapter ‘Menu of the parent
unit’).
•The ‘link’ light on the parent unit starts
ashing red and the message ‘I AM
LINKING’ appears on the display.
1 Because the cord of the baby unit presents
a potential strangulation hazard, make sure
that the baby unit and its cord are at least 1
metre/3.5 feet away from your baby.
2 To prevent a high-pitched sound from one
or both units, make sure the parent unit is at
least 1 metre/3.5 feet away from the baby
unit.
4.2 Linking parent unit and
baby unit
1 Press and hold the on/off button 3on the
baby unit for 2 seconds.
•The nightlight, the battery status light and
the power-on light go on briey.
ENGLISH

8
4.2.1 Operating range
•The operating range is 330 metres/1000
feet outdoors and up to 50 metres/150 feet
indoors.
•The operating range of the baby monitor
varies depending on the surroundings and
factors that cause interference.Wet and moist
materials cause so much interference that
the range loss is up to 100%. For interference
from dry materials, see table below
Dry materials Material
thickness
Loss of
range
Wood, plaster, cardboard,
glass (without metal,
wires or lead)
< 30cm
(12in)
0-10%
Brick, plywood < 30cm
(12in)
5-35%
Reinforced concrete < 30cm
(12in)
30-100%
Metal grilles or bars < 1cm
(0.4in)
90-100%
Metal or aluminium
sheets
< 1cm
(0.4in)
100%
5 Functions and
feedback on the
baby unit
5.1 Nightlight
The nightlight produces a soft glow that comforts
your baby.
1 Press the nightlight on/off button on the baby
unit to switch on the nightlight.
•When the parent unit and baby unit are
linked, the ‘link’ light turns solid green.The
signal strength indicator and the message
‘LINKED’ appear on the display.
•If no connection is established within
10 seconds, the message ‘NOT LINKED’ on
the display alternates with ‘I AM LINKING’.
If still no connection is established after
30 seconds, the parent unit starts to beep
and only the message ‘NOT LINKED’ is
shown.
What to do if no link is established
•The parent unit may be out of range of
the baby unit. Place the parent unit closer
to the baby unit, but not closer than
1 metre/3.5 feet.
•The baby unit or the parent unit may
lose connection because it is too close to
another DECT appliance (e.g. a cordless
phone). Switch off this DECT appliance
or place the unit further away from this
appliance.
•The baby unit may be switched off. Switch
on the baby unit.

9
3 To adjust the sound level of the lullaby, press
the volume + or the volume – button on the
baby unit.
DNote:
You can only set the loudspeaker volume on the
baby unit when a lullaby is playing. If you have set
the volume for the lullaby higher on the baby
unit, the sound will also be louder when you use
the talk function on the parent unit.
4 To stop lullaby playing, press the lullaby play/
stop button Kon the baby unit.
5.3 Paging the parent unit
If you have lost the parent unit, you can use the
FIND button on the baby unit to locate the
parent unit.
DNote:
The paging function only works when the parent
unit is switched on.
1 Press the FIND button on the baby unit.
•Qappears on the display of the parent unit.
2 Press the nightlight on/off button again to
switch off the nightlight.
•The nightlight dims gradually before it goes
out completely.
•Qdisappears from the display of the parent
unit.
5.2 Lullaby function
1 Press the lullaby play/stop button Kon the
baby unit to play the last selected lullaby.
•The selected lullaby repeats for 15 minutes.
•If no lullaby was selected before, lullaby
1 is played.
2 Press the next lullaby button to select
another lullaby from the list.
•If no lullaby is playing, the last selected
lullaby starts playing when you press the
next lullaby button .
•When you press the next lullaby button
while a lullaby is playing, the next lullaby
starts playing.
ENGLISH

10
•Replace the batteries when they run low.
•If the batteries run out of power while the
baby unit is running on battery power, the
baby unit switches off and the parent unit
loses connection with the baby unit.
DNote:
We advise you to use the baby unit on mains
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries.The operating time on non-rechargeable
batteries is 24 hours.
6 Functions and
feedback on the
parent unit
6.1 Volume
The volume can be set if the menu is not active.
There are seven volume levels and a ‘volume off’
setting.
6.1.1 Setting the volume level
1 Press the + button or the - button once.
•The current volume level appears on the
display.
2 Press the + button to increase the volume or
press the - button to decrease the volume.
•The parent unit beeps at every volume step
•At maximum volume, the parent unit gives
two beeps.
•The message ‘PAGING’ appears on the
display of the parent unit and the parent
unit produces a paging alert tone.
2 To stop the paging alert tone, press the FIND
button on the baby unit again or press any
button on the parent unit.
DNote:
The paging alert tone stops automatically after
2 minutes.
5.4 Battery status light
1 The battery status light is solid green when
the baby unit runs on battery power and the
batteries contain enough energy.
2 The battery status light ashes red quickly
when the batteries run low while the baby
unit is running on battery power.